What are your OTHER hobbies?

What’s an “upland” bird? I am curious!

Quail, pheasant, chukar, grouse and partridge for me. North Dakota has pheasant, sharptail grouse and Hungarian partridge.
Here in California I hunt quail and some grouse. I used to hunt pheasant, but there aren’t very many where I live anymore. Farming practices have changed so much. There isn’t hardly any cover for them near me.

Too many hobbies tbh majority is building things. Video games and run a gaming podcast, built my own retro SNES cartridges, built a diy foundry for smelting down some metals for casting, little bit of pottery and woodworking as well, winter time is a slow go for me in Canada however

Here in the states the joke is why did the chicken cross the road ? Tho show the possums how its done. :grinning:

Y’all have such a wide range of hobbies!! It has been great reading all these comments and getting to know a little more about each of you.

Hhhhm define stand up jet ski please is it like my Neighbors

Some already mentioned that I share, telescopes and rc airplanes. Havent been super active in either, of late. Many moons ago, saltwater and freshwater fishtanks.

outside of CNC and general shop work (wood, metal, whatever), my main hobby lately has been watches. Collecting, building, service/repair. I’m up to 18 now, all on the affordable side ($50-$400 ea), including one vintage piece from 1969, and three custom builds. in the middle of a new build now, trying my hand and dial making instead of just buying.

One day I will pony up for a “nice” piece, maybe $1k-$2k, but not anytime soon. I figure when that day comes my collection will be “complete” (spoiler, it never truly is) and this will be the centerpiece.

The FPV stuff is starting to look really appealing again. The new digital high def signal looks like it could be a lot of fun.

In San Diego I had a pretty nice tank, it was like cheating though. I could go surfing and go fill up 40 gallons worth of filtered real seawater from the birch aquarium as often as I wanted for water changes, so I had amazingly healthy tanks. Could not imagine trying to filter and use saltmix.

Cool to hear about all these hobbies and seeing ppls interests.

Building things
Saving/restoring things
Boating
Camping
Water sports
Welding
Cooking
Photography
I am a AME by trade

I’ve actually never tried it. When i got in years ago it was new and expensive. Now that it is more accessible, the FAA regulations around FPV have tightened, and I just don’t want to deal with that. Instead I purposely build and buy planes that are under or at least arguably close enough to the 1/2 lb rule so I don’t even need to register them.

Thats not cheating, that resourcefull! Not to mention, probably healthier for the tank in terms of emulating nature most closely. Synthetic mixes werent all bad though. I put some effort into a semi-automatic mixing and water change setup. It was plumbed through the wall and controlled with manual valves. I could make RO/DI, mix, drain the display, and pump in new water with no buckets required. Just valves and switches. STILL, it was alot of work, lol.

Nice! I’d love to get into that but I’ve been scratching that itch with Mr Horologist and Wristwatch Revival videos instead.

I have one of the coax Omega speedmasters, my colleague has an Omega Seamaster Aqua Terra 15kGauss and one of the Grand Seiko spring drives with the textured face. Another colleague has a bunch of retro quartz stuff etc.

I’ve had colleagues get quite into FPV drone flying and I was always disappointed by the video quality. A couple of years ago I got one of the DJI FPV drones with the digital video link and it’s great, still not as good as the recorded video but good enough to use in real-time as a sightseeing flight. I should post a link to a flyover of our place, I think I’ve probably already sufficiently doxxed myself on here anyway :stuck_out_tongue:

Yeah, $200 gets you Walksnail Avatar HD Goggles L, they are 1080p 60fps…last time I tried it I think it was a crappy 480p B/W and cost more. I watched few vids people are not even putting gopros on anymore.

This is always a hard list to make. Lots of hobbies. Not all as active as I would like:

Reloading and shooting sports including archery. I used to shoot in competitive gun and archery leagues and had a great time doing it. Not very many local to me anymore though.

Food. I make sausage, charcuterie, getting back to making cheese. We can a lot of our garden each year too.

Hydroponics. I have grown some stupid peppers and when it became legal in our state some stupid weed… Watching things grow in water is pretty damn cool.

Blacksmithing/Knifemaking. On the back burner a little more due to some pain issues but I can do it and know how!

I like building stuff. I miss my old workshop and am stuffed into a very cramped basement (6ft tall ceilings) but I make it work.

Kids and grandkids. 2 Kids, 6 grandkids. Wish we were closer, but we make it work when we can.

Cooking in general. I do a lot of outdoor cooking on our grills, griddle and smoker. Build a cool outdoor kitchen that I cannot wait to get back into when the weather warms back up and I can turn the water back on!

good taste all around :wink:

I love electronics, and I have worked as a circuit card repair technician for VERY old cards, but never could get proper training to learn enough to design electronics. I am always impressed by the sheer amount of experts and deep pools of knowledge around the 3DP and CNC worlds. Nothing has humbled me more than being in the presence of many like you.

I now know what to call what I do when watching those woodworking or machining videos…:v::grin:

Honestly, a lot of it is looking at how other people have done things and working from that. Very little of my time is spent designing things brand new from fundamentals. Most of it is:

  • I need to measure a thing, how do I do that?
  • I’ve found a sensor that does what I want and seems reasonable
  • I need something that connects to that sensor, what does it output?
  • I need to feed the sensor into something that already exists, what does it need?
  • What do I need to do to glue those two things together?
  • Ok, so I need a precision rectifier, a filter and a peak detector.
  • Google app notes for a precision rectifier and start copying stuff from that.
  • Google filter calculators and start working out the values that way
  • Open LTSpice and start playing with values to get a peak detector that works as expected

Etc. There’s no one part of that which really ‘needs’ training, and most of the actual training that’s given at university level is actually pretty apallingly bad, at least in my experience. Fundamentally it’s a ‘crack in and give it a shot, make a few mistakes, keep trundling onwards’ kinda thing.

I often just get a random idea and work it through to a first-pass design without ever making anything just to see if I can. Sometimes that turns into a widget I’ve made that just serves to be a bit of a plaything. Sometimes it turns into something directly usable. In a couple of cases, those things have later become the backbone of products that I’ve designed for people and manufactured into the low thousands quantity.

So yeah, if you want to then just pick something and take a stab!

That’s actually an approach I never considered with electronics. I have used it in so many of my other pursuits. For some reason there’s been this wall where I have a basic understanding of electrical components (for instance I understand that a capacitor is used to filter noise from an electrical signal) but I haven’t sought to deepen my knowledge beyond that. I think it was when I realized that there weren’t any electronics being manufactured in the US anymore. If you want a circuit card for your washer, it was made in China 9/10. Most repair companies will just swap cards instead of repairing them.

But I may scratch that itch someday soon when I have space to tinker. Currently in my 5th wheel :wheel: This is all so interesting to read!

Well, as I’ve said to others, always happy to help out and explain what I can or offer assistance with ways to get things done.

Never a better time than now to get into electronics design. The tools have never been as good or easily accessible, the cost of things has never been so low and there’s so much flexibility to pick and choose which bits you want to interact with. You can just daisy chain various Adafruit boards or use something like the Stemma/Qwik ecosystem to connect dev boards together and then write some code. You can design stuff from scratch and just stuff an ESP32 on there to use with existing micropython libraries. You can do it all from the ground up including writing bare-metal code. You can just buy a thing that is all open source but good-to-go and just wire it up and charge ahead. So many options.

I am nowhere near the expert as Jono. But I have a BS in Physics and a MS in EE (but it really focused on algortihms for robotics, not as much practical electronics). I would have been accepted as a junior engineer somewhere when I left college. But I went into software engineering instead. Now I try to remember the theory and pick easy projects to keep it fresh.