your right on the thickness, most will probably be 1/2" some 3/4" maybe the rare 1", but the length is where it gets tricky, i would like to have one up to 12" but truing that distance to the CNC shouldn’t be an issue in the Z axis. but in the Y axis is what i’m concerned about. maybe rather then pressing it against a solid fence, i should be looking at using something that i can adjust in the Y axis as well (either with like a threaded rod or shims)?
yes, the one i was thinking of was this thread: Primo signs, vcarving, games, and a new cnc design
is that the one you where thinking of?
my oldest is 2.5 years. he is always trying to grab things off of tables when i’m not looking. that is what scares me with the CNC.