MPCNC Identification?

Mostly Printed CNC - MPCNC Advice
1

Is this an older version of the MPCNC by V1??? or someone else? Anyone recognize it? I’m looking for STL files and hoping I’ll get lucky.

IMG_20190804_150245
IMG_20190804_1502451440×2560 1.66 MB
IMG_20190804_150245
IMG_20190804_1502451440×2560 1.66 MB
IMG_20190804_121730
IMG_20190804_1217302560×1440 1.5 MB
IMG_20190804_121747
IMG_20190804_1217472560×1440 1.2 MB
IMG_20190804_121754
IMG_20190804_1217542560×1440 1.48 MB
IMG_20190804_121800
IMG_20190804_1218002560×1440 1.3 MB
IMG_20190804_121807
IMG_20190804_1218072560×1440 1.53 MB
IMG_20190804_150221
IMG_20190804_1502211440×2560 1.84 MB
IMG_20190804_150227
IMG_20190804_1502271440×2560 1.69 MB
IMG_20190804_150237
IMG_20190804_1502371440×2560 1.11 MB
IMG_20190804_121800
IMG_20190804_1218002560×1440 1.3 MB

2

Check this:

and read @vicious1 comments at the bottom

3

That is mostly V1 and some V2, custom mounts and ridiculously sized pulleys.

1 Like
4

Do you still have the stl files for the belt clamps on the ends by chance?

5

I’m bad at estimating size (just ask my wife… ba-dum tish!), but those look like something reedonkulous like 10-12mm belts (to go with the aforementioned ridiculous pulleys). Hence the doubled-up idler bearings. So the belt clamps are almost certainly custom parts.

6

No Those are not mine.

I bet they are on thingiverse somewhere.

7

Thanks guys!!!

8

Are those NEMA23 motors? It looks like all the motor mounts have been redesigned to make them fit.

9

I really don’t know Robin. My neighbor traded it for a bunch parts of other stuff for it. He’s trying to put it together but there are some parts missing. I instantly thought of this forum. If anyone was to know it would be you guys. Are Nema23 motors any good?

10

They’re probably too heavy for this style CNC router.

11

I don’t think they’d cause a problem, but the machine probably can’t really use the extra power they could provide.

12

Oh gotcha…