I guess this idea petered out? Or serial number 000006. 
4 Likes
000007…triple ought double O seven? I’ll take it.
300x300x535, orbiter 2.0 + mosquito, 24V.
Edit for the addition
I have to find just ONE more tnut…
4 Likes
I’ll jump in.
Serial number 000008
300x300x350 print size.
Skr pro
Octoprint
Hemera
750w heated bed
300w heated chamber
4 Likes
Does it just have to print or be fully completed?
I went with ‘mostly complete’.
My projects are never really ‘fully complete’.
2 Likes
If it can squirt molten plastic, it is ready for a number!
3 Likes
Well does that make mine 00000009? or however many zeros we are at LOL
300x300x400
750w ac headed bed
Custom cut build plate and support on the LR3 from 1/4" aluminum
Hemera
SKR Pro
4 Likes
I am hoping this makes me a 000 010!
(Or a 2 in binary…)
300x300x285
BIQU H2VS Revo
CAN BUS on Manta M8P and EBB36
500W AC heated bed 1/4" aluminum plate
Added space below for electronics.
Custom extrusion build plate support
5 Likes
Ok, completely forgot to add my 2nd printer to the serial number log…
Well I guess this one will be 0000011
First started some day in 02/23
First print: many moons ago
305x310x285 build volume
Biqu H2 1st generation
Manta M8P V1.0, U2C V 1.1 and EBB42
Sidewinder Fula-bed
Custom X-Carrier and dual 5015 Fan
Video of it printing
The Matrix has been built!!!
2 Likes
Well I just realized these are all v4’s in the Repeat (V3) log…you all want lower numbers or just keep going as is?
1 Like
Since the v1 and v2 MP3DP didn’t get serial numbers… just keep going…
1 Like
You mean a number lower than 8?
Nah. I’m good. Just keep going.
2 Likes
So I’m new to this. Is there an official sticker or Logo plate to carve into the panels? LOL
1 Like
Tony, was your file something sharable like an Inkscape file, or should I try my hand at something?
1 Like
I think I did part in fusion and part in inkscape. I’ll doctor it up and share it.
3 Likes
hmmmm…milled aluminum plate sounds nice and fancy… And I have some aluminum that’s not the right size for anything I need anyways LOL
2 Likes
Here we go. SVG and Fusion Archive. The text is Impact, so if you don’t have it installed you’ll want to get it. I included my Fusion setup, but of course, you’ll want to make sure it does what you want. I didn’t actually use that one, I used a copy of it and haven’t done anything to proof THIS copy.
Repeat Tag.zip (368.7 KB)
1 Like
First one
4 Likes
Here is number 12!
300x300x350
E3D Hemera hotend
SKR Pro v1.2 with 2209 drivers
750W AC heated bed 1/4" aluminum plate with magnetic build plate
Project Started April 4, 2023
First Print May 12, 2023
5 Likes