I have too many hobbles. There is.a Koi pond in my backyard, and it needs a new filter. The best filters are called “Rotating Drum Filters”, which are large boxes usually made from polypropylene sheet or HDPE sheet, with a lot of complex cuts, welded together, with electromechanical parts. I was go…

[image] 2ManyHobbies: I have too many hobbles. Too many hobbies are barely enough.

[image] 2ManyHobbies: I have too many hobbles. Never. [image] New LR3 in Northeast Pennsylvania If you ask my wife, my hobby is collecting hobbies.

This is the Bambu Studio “Prepare” screen. Everything fits on the 180mm x 180mm plate except for the YZ plates, which I split and printed the overhanging part separately. Will glue the parts back together after printing. Everything is printed with Gyroid infill, with 3 walls, and at the recommended …

I have a spreadsheet to keep track of the parts. Build time for the Core is 20h 35min. Total filament used is 1882g. The A1 Mini allows for remote operation, so most days I started the print job during a short break at work, and it was finished by late evening or next morning. Then remove parts from…

The Bambu A1 Mini with Core. Quite a close fit! [IMG_1656]

Close up of the Core showing (lack of) layer lines. Its printed with PLA Pro with a 4mm standard nozzle. [IMG_1654]

YZ plate. Its too big for the build plate so I printed in two parts. The glue line is on the far left. I used superglue. [IMG_1655]

Detail parts are in Elagoo Pro Burgandy. Here are several closeups of one of the wheel parts showing the print quality. Z axis. Note lack of layer lines [IMG_1657]

Next picture shows the surface from the textured build plate [IMG_1658]

LR4 build for CNC of a Koi pond filter box

LowRider CNC Your Builds

jeyeager (Jason Yeager) December 11, 2024, 11:21pm 3

Never.