LowRider 3– Core collision

[RockinRiley (Riley)]

Yeah, I was looking to see if 1" emt would solve this so you can easily go on, but it does not look like it.

Are all your parts the 25.4 version?
see below:

EMT OD Question

The 3/4” here is 23.4mm and the 1” is actually 29.4mm. Like I said, I already had the 25.4mm parts printed. I’m thinking the 3/4” should be fine as that’s 2mm slip which doesn’t seem like much but I want to make sure before purchasing and cutting then repurchasing xD