So I’m up to the stage to do the crown,
I home all axis and all seems good.
When I use repetier host, load the gcode from estlcam,
Move x,y,Z axis to where I want to start the crown from,
Set Z height to have a hair gap between pencil and paper, estlcam depth of was set to 1mm.
On repetier host, I click print, and Z goes all the way down and bottoms out. What could be the issue?
Does it have any issues with the test crown gcode that you can download from the docs?
Yeah worked it out,
Gcode wasn’t setting Z0 on the one I compiled.
Now it’s all working 
1 Like
@Wirepower we won’t believe you until you share a photo of your crown. 
Congratulations and welcome to the club!
1 Like
One of us… One of us…
Congrats!
2 Likes