Choosing a Spindle for My LR3 Build with a 1500mm X × 2600mm Y Cutting Area – Need Advice!

[Michael_Melancon (Mike M)]

@Tokoloshe

I think @Jonathjon uses a Vevor spindle

@Jonathjon

I run a vevor air cooled spindle in both of my LR3s and it is much quieter than a palm router.

@Jonathjon

1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter | VEVOR US

This is the link he’s posted before, but it’s discontinued and doesn’t seem to have an equivalent on the site anymore.