Anyone add custom tool mounts to their lowrider?

[DougJoseph (Doug Joseph (design8studio))]

@jamiek

Here’s one, for low-load applications

And be sure to check out Jamie’s awesome remix of the same mount!

@DougJoseph

Speaking of which, Jamie has now remixed this in a way that requires no acorn nuts, no screws for troughs, only one magnet on one side, no need for drilling any magnets for additional countersinking, and no need for prying any magnets out for flipping them. Check out his remix here . His remix avoids acorn nuts and avoids troughs made from screws, all by having both “mounds” and “valleys” made from 3D printed plastic. Here’s a photo of Jamie’s remix:

Also, for details on switching GPIO pins on / off on the Jackpot, here’s a post I made on that topic:

Details for switching on/off the MOSFETs via either Web-UI buttons or in GCode:

Location on the board (upper right corner): [Jackpot Control Board - Wiring Diagram for Lowrider labels MOSFETS] Web-UI buttons In the FluidNC web-based GUI, the buttons labeled “Flood” and “Mist” turn the MOSFETs on/off: [Jackpot FluidNC MOSFETS IMG_3442] GCode According to the FluidNC WIki — Supported Gcodes | Wiki.js … M7 / M7.1 - Mist Coolant M7 ; Turns on 2nd MOSFET on right side, VMOT-> GPIO.16 M7.1 ; Turns off 2nd MOSFET on right side, VMOT-> GPIO.16 M8. / M8.1 - Flood Coolan…