{"users":[{"id":-1,"username":"system","name":"system","avatar_template":"//us1.dh-cdn.net/uploads/db5587/original/2X/8/80a6ba28d95c089e3a0b7432139a26faa946cd84.png","admin":true,"moderator":true,"trust_level":4},{"id":11654,"username":"Sarcela","name":"Cesar Fraire","avatar_template":"/letter_avatar_proxy/v4/letter/s/8491ac/{size}.png","trust_level":1},{"id":353,"username":"jeffeb3","name":"Jeffeb3","avatar_template":"/user_avatar/forum.v1e.com/jeffeb3/{size}/91905_2.png","trust_level":4},{"id":8412,"username":"jkendric","name":"JEREMY KENDRICK","avatar_template":"/user_avatar/forum.v1e.com/jkendric/{size}/57472_2.png","trust_level":1},{"id":13296,"username":"DevanshGarg31","name":"Devansh Garg","avatar_template":"/user_avatar/forum.v1e.com/devanshgarg31/{size}/99084_2.png","trust_level":0},{"id":2,"username":"vicious1","name":"Ryan","avatar_template":"/user_avatar/forum.v1e.com/vicious1/{size}/104426_2.png","admin":true,"moderator":true,"trust_level":4},{"id":4103,"username":"Jonathjon","name":"Jonathan Jones","avatar_template":"/user_avatar/forum.v1e.com/jonathjon/{size}/70532_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":10186,"username":"azab2c","name":"Aza B2C","avatar_template":"/user_avatar/forum.v1e.com/azab2c/{size}/98228_2.png","trust_level":3},{"id":5226,"username":"Tokoloshe","name":"Philipp","avatar_template":"/user_avatar/forum.v1e.com/tokoloshe/{size}/26379_2.png","primary_group_name":"patrons","trust_level":3},{"id":5532,"username":"texx","name":"Luca Tessaro","avatar_template":"/user_avatar/forum.v1e.com/texx/{size}/25472_2.png","trust_level":1},{"id":7153,"username":"MichaelDot","name":"Michael","avatar_template":"/user_avatar/forum.v1e.com/michaeldot/{size}/34704_2.png","trust_level":2},{"id":7375,"username":"WillyCornbread","name":"William Jackson","avatar_template":"/letter_avatar_proxy/v4/letter/w/ecc23a/{size}.png","trust_level":0},{"id":1894,"username":"timcallinan","name":"Tim Callinan","avatar_template":"/user_avatar/forum.v1e.com/timcallinan/{size}/78505_2.png","trust_level":2},{"id":7236,"username":"Jerome","name":"","avatar_template":"/user_avatar/forum.v1e.com/jerome/{size}/35157_2.png","trust_level":2},{"id":11474,"username":"Aceso","name":"Brad Hewson","avatar_template":"/user_avatar/forum.v1e.com/aceso/{size}/83633_2.png","trust_level":1},{"id":9253,"username":"MakerJim","name":"","avatar_template":"/user_avatar/forum.v1e.com/makerjim/{size}/87766_2.png","trust_level":3},{"id":5834,"username":"Mcunn","name":"Michael Cunningham","avatar_template":"/letter_avatar_proxy/v4/letter/m/cc9497/{size}.png","trust_level":2},{"id":4406,"username":"mperino","name":"Mperino","avatar_template":"/user_avatar/forum.v1e.com/mperino/{size}/19711_2.png","trust_level":2},{"id":2113,"username":"mrehorst","name":"Mark Rehorst","avatar_template":"/user_avatar/forum.v1e.com/mrehorst/{size}/249_2.png","trust_level":2},{"id":7147,"username":"DougJoseph","name":"Doug Joseph (design8studio)","avatar_template":"/user_avatar/forum.v1e.com/dougjoseph/{size}/34670_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":5647,"username":"SupraGuy","name":"Dan","avatar_template":"/user_avatar/forum.v1e.com/supraguy/{size}/37950_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":2538,"username":"kockie-nl","name":"Kockie_nl","avatar_template":"/user_avatar/forum.v1e.com/kockie-nl/{size}/15942_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":11155,"username":"Hillsdale","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/h/b4bc9f/{size}.png","trust_level":2},{"id":8581,"username":"RockinRiley","name":"Riley","avatar_template":"/user_avatar/forum.v1e.com/rockinriley/{size}/52190_2.png","trust_level":3},{"id":11656,"username":"Stoli","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/a3d4f5/{size}.png","trust_level":2},{"id":8548,"username":"Dreyfus","name":"","avatar_template":"/user_avatar/forum.v1e.com/dreyfus/{size}/107209_2.png","trust_level":2},{"id":7114,"username":"MattMed","name":"Matt M","avatar_template":"/user_avatar/forum.v1e.com/mattmed/{size}/62520_2.png","trust_level":2},{"id":10812,"username":"Atom1c","name":"Tom","avatar_template":"/letter_avatar_proxy/v4/letter/a/f9ae1b/{size}.png","trust_level":1},{"id":10791,"username":"freshfitz","name":"Ryan","avatar_template":"/letter_avatar_proxy/v4/letter/f/ed8c4c/{size}.png","trust_level":1},{"id":6196,"username":"Wolfspaw","name":"","avatar_template":"/user_avatar/forum.v1e.com/wolfspaw/{size}/31717_2.png","trust_level":2},{"id":10512,"username":"bend100","name":"Ben Derivolkov","avatar_template":"/user_avatar/forum.v1e.com/bend100/{size}/59332_2.png","trust_level":0},{"id":9708,"username":"Waspjr","name":"Travis ","avatar_template":"/user_avatar/forum.v1e.com/waspjr/{size}/52267_2.png","trust_level":2},{"id":9790,"username":"CmdrShepard42","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/c/b5a626/{size}.png","trust_level":2},{"id":6231,"username":"truglodite","name":"Kev","avatar_template":"/letter_avatar_proxy/v4/letter/t/f0a364/{size}.png","trust_level":2},{"id":10167,"username":"Fodder1","name":"Chris","avatar_template":"/letter_avatar_proxy/v4/letter/f/e68b1a/{size}.png","trust_level":2},{"id":9650,"username":"bu2025bart","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/b/439d5e/{size}.png","trust_level":0},{"id":5102,"username":"dart1280","name":"Mike","avatar_template":"/user_avatar/forum.v1e.com/dart1280/{size}/56864_2.png","trust_level":2},{"id":3186,"username":"bugilt","name":"Tio Dave","avatar_template":"/user_avatar/forum.v1e.com/bugilt/{size}/365_2.png","trust_level":1},{"id":6085,"username":"ArstenA","name":"Brian Spranger","avatar_template":"/letter_avatar_proxy/v4/letter/a/e480ec/{size}.png","trust_level":2},{"id":9119,"username":"johnartisan","name":"John","avatar_template":"/letter_avatar_proxy/v4/letter/j/ee7513/{size}.png","trust_level":1},{"id":1911,"username":"tigert10","name":"Ty","avatar_template":"/letter_avatar_proxy/v4/letter/t/f1d935/{size}.png","trust_level":2},{"id":8263,"username":"Coolerooney","name":"C","avatar_template":"/letter_avatar_proxy/v4/letter/c/977dab/{size}.png","trust_level":1},{"id":4556,"username":"nstiesi","name":"Nicholas Stiesi","avatar_template":"/user_avatar/forum.v1e.com/nstiesi/{size}/56221_2.png","trust_level":2},{"id":618,"username":"billsey","name":"Bill","avatar_template":"/user_avatar/forum.v1e.com/billsey/{size}/18604_2.png","trust_level":2},{"id":70,"username":"karltinsly","name":"TechButterfly","avatar_template":"/user_avatar/forum.v1e.com/karltinsly/{size}/51385_2.png","trust_level":2},{"id":5765,"username":"Breslauklaus","name":"klaus kapfinger","avatar_template":"/user_avatar/forum.v1e.com/breslauklaus/{size}/52861_2.png","trust_level":2},{"id":4429,"username":"B-26","name":"Paul ","avatar_template":"/user_avatar/forum.v1e.com/b-26/{size}/19907_2.png","trust_level":2},{"id":3348,"username":"robertbu","name":"Robert Bunney","avatar_template":"/user_avatar/forum.v1e.com/robertbu/{size}/62426_2.png","trust_level":2},{"id":2236,"username":"jamiek","name":"Jamie","avatar_template":"/user_avatar/forum.v1e.com/jamiek/{size}/104441_2.png","trust_level":2},{"id":1854,"username":"teresachenec","name":"ssblue","avatar_template":"/user_avatar/forum.v1e.com/teresachenec/{size}/227_2.png","trust_level":1},{"id":482,"username":"bcdcmcnamara","name":"BT","avatar_template":"/letter_avatar_proxy/v4/letter/b/91b2a8/{size}.png","trust_level":2},{"id":268,"username":"barry99705","name":"Barry","avatar_template":"/user_avatar/forum.v1e.com/barry99705/{size}/15876_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":6772,"username":"dmauch","name":"Dan Mauch","avatar_template":"/letter_avatar_proxy/v4/letter/d/58f4c7/{size}.png","trust_level":1},{"id":6729,"username":"Jessica","name":"Jessica","avatar_template":"/user_avatar/forum.v1e.com/jessica/{size}/33218_2.png","trust_level":1},{"id":2018,"username":"brookman","name":"Jeff Brookins","avatar_template":"/letter_avatar_proxy/v4/letter/b/f19dbf/{size}.png","trust_level":1},{"id":1846,"username":"jaygrovr","name":"Jason Goldenberg","avatar_template":"/letter_avatar_proxy/v4/letter/j/ad7895/{size}.png","trust_level":1}],"primary_groups":[{"id":41,"name":"patrons"}],"flair_groups":[{"id":41,"name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/zenxy/software-zenxy/34?page=1","per_page":30,"top_tags":[],"topics":[{"fancy_title":"About the Software category","id":3564,"title":"About the Software category","slug":"about-the-software-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2019-11-23T09:16:47.897Z","last_posted_at":null,"bumped":true,"bumped_at":"2019-11-23T09:16:47.905Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"(Replace this first paragraph with a brief description of your new category. This guidance will appear in the category selection area, so try to keep it below 200 characters.) \nUse the following parag…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":456,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":null,"last_post_id":3567,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":-1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Marlin adapted for ZenXY","id":50029,"title":"Marlin adapted for ZenXY","slug":"marlin-adapted-for-zenxy","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/5/a5725738e1bf368a76381878295eba11ee28f8e7_2_1024x512.png","created_at":"2025-06-29T20:05:59.839Z","last_posted_at":"2025-06-30T02:41:13.082Z","bumped":true,"bumped_at":"2025-06-30T02:41:13.082Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello all! \nI have modified the marlin software for be more alike ZenXY, I modified for have some improvements, like: \n\n\nFully random start, only turn it on and randomly will select a file and start. …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1200,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/a/5/a5725738e1bf368a76381878295eba11ee28f8e7.png"},{"max_width":1024,"max_height":1024,"width":1024,"height":512,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/5/a5725738e1bf368a76381878295eba11ee28f8e7_2_1024x512.png"},{"max_width":800,"max_height":800,"width":800,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/5/a5725738e1bf368a76381878295eba11ee28f8e7_2_800x400.png"},{"max_width":400,"max_height":400,"width":400,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/5/a5725738e1bf368a76381878295eba11ee28f8e7_2_400x200.png"},{"max_width":200,"max_height":200,"width":200,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/5/a5725738e1bf368a76381878295eba11ee28f8e7_2_200x100.png"},{"max_width":100,"max_height":100,"width":100,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/5/a5725738e1bf368a76381878295eba11ee28f8e7_2_100x50.png"},{"max_width":50,"max_height":50,"width":50,"height":25,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/5/a5725738e1bf368a76381878295eba11ee28f8e7_2_50x25.png"}],"tags":[],"tags_descriptions":{},"views":106,"like_count":8,"has_summary":false,"last_poster_username":"jeffeb3","category_id":34,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":75,"green":81,"blue":88},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Great job! Those are really great features.","last_post_id":385643,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11654,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"GRBL and Polar Tables","id":37392,"title":"GRBL and Polar Tables","slug":"grbl-and-polar-tables","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":null,"created_at":"2023-03-22T01:52:10.510Z","last_posted_at":"2026-03-03T21:28:26.989Z","bumped":true,"bumped_at":"2025-02-28T10:34:35.060Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have really tried to search through the existing posts on the forums to solve this as I have seen some existing discussions from @jeffeb3 regarding Sandify output for polar machines. I created a SCA…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1158,"like_count":6,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":422657,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":8412,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13296,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sandify in the news again!","id":46745,"title":"Sandify in the news again!","slug":"sandify-in-the-news-again","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/6/a/6a938ae1144b60d6263f494f25c173328393b7fb.png","created_at":"2024-11-30T23:08:05.211Z","last_posted_at":"2026-03-03T14:35:30.216Z","bumped":true,"bumped_at":"2024-12-02T21:58:47.714Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Heffe you’re famous again! Not a direct link but hey, they spelled it right!","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":598,"height":336,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/6/a/6a938ae1144b60d6263f494f25c173328393b7fb.png"},{"max_width":400,"max_height":400,"width":400,"height":224,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/a/6a938ae1144b60d6263f494f25c173328393b7fb_2_400x224.png"},{"max_width":200,"max_height":200,"width":200,"height":112,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/a/6a938ae1144b60d6263f494f25c173328393b7fb_2_200x112.png"},{"max_width":100,"max_height":100,"width":100,"height":56,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/a/6a938ae1144b60d6263f494f25c173328393b7fb_2_100x56.png"},{"max_width":50,"max_height":50,"width":50,"height":28,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/a/6a938ae1144b60d6263f494f25c173328393b7fb_2_50x28.png"}],"tags":[],"tags_descriptions":{},"views":213,"like_count":21,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":10,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":101,"green":86,"blue":133},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420381,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":10186,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sandypi","id":19229,"title":"Sandypi","slug":"sandypi","posts_count":120,"reply_count":74,"highest_post_number":122,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/0/00e405f10a8ee93e17b960d042c620fa371c25d0_2_1023x483.png","created_at":"2020-07-13T17:58:09.393Z","last_posted_at":"2024-07-04T08:00:25.898Z","bumped":true,"bumped_at":"2024-07-08T07:14:31.023Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, I’m Luca. I just registered to the forum but I’ve been following since I printed my mpcnc almost 2 years ago now. By following v1 on instagram I got to know the zenXY project and I got in love wit…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1898,"height":896,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/0/0/00e405f10a8ee93e17b960d042c620fa371c25d0.png"},{"max_width":1024,"max_height":1024,"width":1023,"height":483,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/0/00e405f10a8ee93e17b960d042c620fa371c25d0_2_1023x483.png"},{"max_width":800,"max_height":800,"width":800,"height":377,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/0/00e405f10a8ee93e17b960d042c620fa371c25d0_2_800x377.png"},{"max_width":400,"max_height":400,"width":400,"height":188,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/0/00e405f10a8ee93e17b960d042c620fa371c25d0_2_400x188.png"},{"max_width":200,"max_height":200,"width":200,"height":94,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/0/00e405f10a8ee93e17b960d042c620fa371c25d0_2_200x94.png"},{"max_width":100,"max_height":100,"width":100,"height":47,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/0/00e405f10a8ee93e17b960d042c620fa371c25d0_2_100x47.png"},{"max_width":50,"max_height":50,"width":50,"height":23,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/0/00e405f10a8ee93e17b960d042c620fa371c25d0_2_50x23.png"}],"tags":[],"tags_descriptions":{},"views":7847,"like_count":98,"has_summary":true,"last_poster_username":"Jerome","category_id":34,"op_like_count":12,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":49,"green":67,"blue":59},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hi, it’s been a while and I’m coming back to build V3 of my sand table. \nI build this very version of the “Sisyphus MAGIC SAND Coffee Table - Arduino | Pi | 3D Printed” \nIt’s a very easy to print and…","last_post_id":326735,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":5532,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7153,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7375,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1894,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7236,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot config","id":43995,"title":"Jackpot config","slug":"jackpot-config","posts_count":7,"reply_count":2,"highest_post_number":8,"image_url":null,"created_at":"2024-05-29T02:06:52.619Z","last_posted_at":"2026-03-03T21:09:47.851Z","bumped":true,"bumped_at":"2024-05-30T22:14:54.843Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Here is my config for my ZenXY table. I have not tested it yet. Posting it here for people smarter then me to look at and see if I need to change anything. My jackpot board is V1.2 10/2023 ESP32-wroom…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":196,"like_count":7,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Closing old topics to limit spambots","last_post_id":421423,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11474,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Python PI GCode Sender Questions","id":33632,"title":"Python PI GCode Sender Questions","slug":"python-pi-gcode-sender-questions","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":null,"created_at":"2022-07-13T14:50:22.141Z","last_posted_at":"2024-05-13T22:58:48.156Z","bumped":true,"bumped_at":"2024-05-13T22:58:48.156Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello Folks, \nHope everyone is keeping well. Im making some progress with a raspberry Pi python GRBL sender. Right now, \n\nIt picks a random G-Code file from a folder\nStreams the file accross the seria…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1909,"like_count":5,"has_summary":false,"last_poster_username":"mperino","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thank You @timcallinan your code helped me with a little CNC touchpad for a MARLIN based CNC. \nMachined a PCB on it with 6 directional buttons (XYZ +/-), and 5 function Buttons (Zero XYZ, Zero Z, Move…","last_post_id":320819,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1894,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5834,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4406,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"For people with rectangular tables and cats","id":43196,"title":"For people with rectangular tables and cats","slug":"for-people-with-rectangular-tables-and-cats","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":null,"created_at":"2024-03-31T16:16:01.066Z","last_posted_at":"2026-03-03T21:23:35.696Z","bumped":true,"bumped_at":"2024-03-31T22:04:14.326Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Everyone with a cat knows that they get bored easily. If a toy doesn’t move by itself, preferably in a random manner, they aren’t going to play with it for long. \nSand tables can be great cat entertai…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":273,"like_count":14,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":8,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":421797,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2113,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7147,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":2538,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sandtable Etch-a-Sketch","id":42882,"title":"Sandtable Etch-a-Sketch","slug":"sandtable-etch-a-sketch","posts_count":10,"reply_count":5,"highest_post_number":11,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/3/63f76e380a86e98c06c3da0ca8370e5c21a78d9a_2_1024x768.jpeg","created_at":"2024-03-11T16:03:39.869Z","last_posted_at":"2026-03-03T21:24:11.876Z","bumped":true,"bumped_at":"2024-03-20T02:54:33.475Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi folks! \nI wrote some python code (SandSketch) to drive your sandtable like an etch-a-sketch using a PS5 DualSense controller and a PC. It worked out really well so I wanted to share it. \nThe joysti…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/6/3/63f76e380a86e98c06c3da0ca8370e5c21a78d9a.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/3/63f76e380a86e98c06c3da0ca8370e5c21a78d9a_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/3/63f76e380a86e98c06c3da0ca8370e5c21a78d9a_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/3/63f76e380a86e98c06c3da0ca8370e5c21a78d9a_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/3/63f76e380a86e98c06c3da0ca8370e5c21a78d9a_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/3/63f76e380a86e98c06c3da0ca8370e5c21a78d9a_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/3/63f76e380a86e98c06c3da0ca8370e5c21a78d9a_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":575,"like_count":18,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":10,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":65,"green":71,"blue":65},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":421922,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11155,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8581,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sandify Local Install","id":42299,"title":"Sandify Local Install","slug":"sandify-local-install","posts_count":13,"reply_count":4,"highest_post_number":13,"image_url":null,"created_at":"2024-02-04T15:52:46.547Z","last_posted_at":"2026-03-03T21:25:54.792Z","bumped":true,"bumped_at":"2024-02-06T00:57:56.584Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Before I enter npm hell, can someone tell me what the minimum version(s) of node I will need to run sandify locally? I want to put it on a box running CENTOS 7 and I don’t want to upgrade it. I believ…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":453,"like_count":3,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":422172,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11656,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Updated dual_speedify software","id":41069,"title":"Updated dual_speedify software","slug":"updated-dual-speedify-software","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/9/d9604617b38401bb4f2817df25f9daa94bb93285_2_923x1024.jpeg","created_at":"2023-11-26T14:27:06.589Z","last_posted_at":"2026-03-03T14:22:40.920Z","bumped":true,"bumped_at":"2023-11-26T14:27:06.778Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The latest, wonderful (!) updates to Sandify broke my dual_speedify perl program that assigns two speeds to the drawings (rectangular tables only!), one, usually faster, along the edges of the pattern…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1344,"height":1490,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/d/9/d9604617b38401bb4f2817df25f9daa94bb93285.jpeg"},{"max_width":1024,"max_height":1024,"width":923,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/9/d9604617b38401bb4f2817df25f9daa94bb93285_2_923x1024.jpeg"},{"max_width":800,"max_height":800,"width":721,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/9/d9604617b38401bb4f2817df25f9daa94bb93285_2_721x800.jpeg"},{"max_width":400,"max_height":400,"width":360,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/9/d9604617b38401bb4f2817df25f9daa94bb93285_2_360x400.jpeg"},{"max_width":200,"max_height":200,"width":180,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/9/d9604617b38401bb4f2817df25f9daa94bb93285_2_180x200.jpeg"},{"max_width":100,"max_height":100,"width":90,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/9/d9604617b38401bb4f2817df25f9daa94bb93285_2_90x100.jpeg"},{"max_width":50,"max_height":50,"width":45,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/9/d9604617b38401bb4f2817df25f9daa94bb93285_2_45x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":274,"like_count":1,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":24,"green":23,"blue":23},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":418545,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2113,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New Software, maybe?","id":39038,"title":"New Software, maybe?","slug":"new-software-maybe","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2023-07-16T15:53:40.064Z","last_posted_at":"2026-03-03T14:29:47.587Z","bumped":true,"bumped_at":"2023-07-16T18:53:08.214Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just stumbled over this build in the instructables newsletter (https://www.instructables.com/ESP32-Powered-Tabletop-Kinetic-Sand-Drawing-Robot/), he says he wrote the software from scratch and is us…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":464,"like_count":4,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":419388,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8548,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sandify Issues","id":38617,"title":"Sandify Issues","slug":"sandify-issues","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/0/40f12db6cf4cdd35b95b4a21f0ebcc9e5d64dcfa.jpeg","created_at":"2023-06-12T19:41:23.276Z","last_posted_at":"2026-03-03T14:30:42.890Z","bumped":true,"bumped_at":"2023-06-13T04:22:15.849Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"There is a difference between the Sandify preview and what actually happens on the table. See below I have written text and then I am masking patterns around it. I don’t want anything to come back acr…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":751,"height":751,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/0/40f12db6cf4cdd35b95b4a21f0ebcc9e5d64dcfa.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/0/40f12db6cf4cdd35b95b4a21f0ebcc9e5d64dcfa_2_400x400.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/0/40f12db6cf4cdd35b95b4a21f0ebcc9e5d64dcfa_2_200x200.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/0/40f12db6cf4cdd35b95b4a21f0ebcc9e5d64dcfa_2_100x100.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/0/40f12db6cf4cdd35b95b4a21f0ebcc9e5d64dcfa_2_50x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":305,"like_count":2,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":238,"green":243,"blue":218},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":419546,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":7114,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Firmware help for Wolfpaws Design","id":38570,"title":"Firmware help for Wolfpaws Design","slug":"firmware-help-for-wolfpaws-design","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2023-06-10T00:01:15.994Z","last_posted_at":"2026-03-03T14:30:49.389Z","bumped":true,"bumped_at":"2023-06-10T00:01:16.225Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"First I want to say big thanks to Wolfpaws design work in creating an awesome project. \nI am having trouble with the firmware side of the design as I am quite a noob when it comes to coding. \nI cannib…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":367,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":419592,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10812,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Corexy sandify Error 22 Gcode undefined feed rate","id":38504,"title":"Corexy sandify Error 22 Gcode undefined feed rate","slug":"corexy-sandify-error-22-gcode-undefined-feed-rate","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":null,"created_at":"2023-06-05T01:07:48.917Z","last_posted_at":"2026-03-03T14:30:50.383Z","bumped":true,"bumped_at":"2023-06-06T11:58:19.333Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Trying to run a sandify gcode on fluidnc and I get “Error 22 undefined feed rate” and it looks like because sandify does not have a F code after the x y, If I insert an F code it runs. Is there anythi…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":534,"like_count":2,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":419599,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10791,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"ZenXY morphing to SCARA","id":31496,"title":"ZenXY morphing to SCARA","slug":"zenxy-morphing-to-scara","posts_count":9,"reply_count":3,"highest_post_number":9,"image_url":null,"created_at":"2022-02-12T21:06:11.325Z","last_posted_at":"2023-04-06T20:37:35.310Z","bumped":true,"bumped_at":"2023-04-06T20:37:35.310Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I currently have a ZenXY2 (CoreXY) machine that uses BDring’s TMC2209 Pen Laser V2.0 controller board and Grbl ESP32 firmware. If my memory is correct, I just selected the “tmc2209_pen_laser.h” machin…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":2034,"like_count":8,"has_summary":false,"last_poster_username":"Waspjr","category_id":34,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"The machine locks itself out until it gets a \n$X \nCommand to bring it out of “locked” and into “idle” \nYou can also do this by clicking the locked button on the webui","last_post_id":254149,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6196,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10512,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9708,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Octopi plugins","id":36814,"title":"Octopi plugins","slug":"octopi-plugins","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":null,"created_at":"2023-02-16T08:39:29.475Z","last_posted_at":"2026-03-03T21:30:29.361Z","bumped":true,"bumped_at":"2023-02-19T16:48:55.496Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, \nI finished my sand table and it’s runing fine with an rpi 3+ and octopi. \nI would like to start printing automatically on power on and found several plugins to do so. \nNone of them are quit…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":394,"like_count":1,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":422908,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":7236,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5834,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FluidNC sand table automation/control via Home Assistant (work in progress)","id":35547,"title":"FluidNC sand table automation/control via Home Assistant (work in progress)","slug":"fluidnc-sand-table-automation-control-via-home-assistant-work-in-progress","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/f/9ff2559d1d766dd731778e04ededa1478e3fd32d.jpeg","created_at":"2022-12-03T22:01:11.799Z","last_posted_at":"2026-03-03T21:42:43.445Z","bumped":true,"bumped_at":"2023-02-07T22:27:39.978Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I still have a lot of work to do here but I thought I’d share my progress in a thread in case other people find this useful. Full disclosure I am not a software engineer and there are probably much be…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":300,"height":294,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/f/9ff2559d1d766dd731778e04ededa1478e3fd32d.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":196,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9ff2559d1d766dd731778e04ededa1478e3fd32d_2_200x196.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":98,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9ff2559d1d766dd731778e04ededa1478e3fd32d_2_100x98.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":49,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9ff2559d1d766dd731778e04ededa1478e3fd32d_2_50x49.jpeg"}],"tags":[],"tags_descriptions":{},"views":1191,"like_count":3,"has_summary":false,"last_poster_username":"vicious1","category_id":34,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":33,"green":34,"blue":35},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":423491,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":9790,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6231,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10167,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Basic arduino grbl code question","id":34095,"title":"Basic arduino grbl code question","slug":"basic-arduino-grbl-code-question","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2022-08-22T22:29:54.743Z","last_posted_at":"2022-08-23T16:17:21.005Z","bumped":true,"bumped_at":"2022-08-23T16:17:21.005Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, I’m newer to coding with the Arduino uno. Was able to download the gbrlUpload sketch from the link attached below , but when I attempted to upload it to the Arduino many warnings came back i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":563,"like_count":2,"has_summary":false,"last_poster_username":"jeffeb3","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Warnings won’t stop the compiler (unless you have configured it to fail on any warning). So the short story is that you can just build it and ignore the warnings. \nLong story: \nWarnings are generally …","last_post_id":227596,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":9650,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5102,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Michael Dubno’s Zen table","id":30199,"title":"Michael Dubno's Zen table","slug":"michael-dubnos-zen-table","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/69547562544bfcb5354d8f69b44cb1ca571c9699_2_1024x576.jpeg","created_at":"2021-11-19T11:10:02.933Z","last_posted_at":"2022-07-18T05:12:10.983Z","bumped":true,"bumped_at":"2022-07-18T05:12:10.983Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"A channel I subscribe to on youtube that does shop tours recently visited Michael Dubno’s shop. He shows a ZenXY like table that is very similar. It has some cool features he speaks about. He also men…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1280,"height":720,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/6/9/69547562544bfcb5354d8f69b44cb1ca571c9699.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":576,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/69547562544bfcb5354d8f69b44cb1ca571c9699_2_1024x576.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":450,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/69547562544bfcb5354d8f69b44cb1ca571c9699_2_800x450.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":225,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/69547562544bfcb5354d8f69b44cb1ca571c9699_2_400x225.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":112,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/69547562544bfcb5354d8f69b44cb1ca571c9699_2_200x112.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":56,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/69547562544bfcb5354d8f69b44cb1ca571c9699_2_100x56.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":28,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/69547562544bfcb5354d8f69b44cb1ca571c9699_2_50x28.jpeg"}],"tags":[],"tags_descriptions":{},"views":857,"like_count":2,"has_summary":false,"last_poster_username":"Mcunn","category_id":34,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":215,"green":210,"blue":209},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Still remember ultimate iv \nK- to klimb","last_post_id":224533,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":3186,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6085,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5834,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Steps per unit for polar sand table","id":32111,"title":"Steps per unit for polar sand table","slug":"steps-per-unit-for-polar-sand-table","posts_count":11,"reply_count":2,"highest_post_number":11,"image_url":null,"created_at":"2022-03-28T03:19:07.077Z","last_posted_at":"2022-03-29T05:59:47.465Z","bumped":true,"bumped_at":"2022-03-29T05:59:47.465Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m building a polar sand table based on robdobson’s design using a BTT SKR2. \nI’m hung up trying to calculate the steps per unit so I can utilize Sandify. \nIf anyone can baby step me through it I wou…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1012,"like_count":4,"has_summary":false,"last_poster_username":"johnartisan","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thanks for your help and I never would have gotten this far without this wonderful site!","last_post_id":213454,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":9119,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"CAM Software for ZenXY with no Z Lifts","id":30241,"title":"CAM Software for ZenXY with no Z Lifts","slug":"cam-software-for-zenxy-with-no-z-lifts","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2021-11-23T01:27:43.680Z","last_posted_at":"2022-01-29T18:21:09.492Z","bumped":true,"bumped_at":"2022-01-29T19:57:47.706Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, I have just finished my ZenXY Table and it is sweet! I have been using Sandify to create the patterns which works great, however, I am looking for other solutions for creating drawings. I can crea…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1005,"like_count":3,"has_summary":false,"last_poster_username":"Coolerooney","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I make my patterns from jpeg, via CAM software (mrsoft) take the output as Gcode. There are diagonal paths, which can not be used \nMy table has parallel erasing tracks- see `zen table on kickstarter \nW…","last_post_id":207051,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1911,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8263,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"ZenXY art gallery?","id":27887,"title":"ZenXY art gallery?","slug":"zenxy-art-gallery","posts_count":7,"reply_count":3,"highest_post_number":7,"image_url":null,"created_at":"2021-06-10T03:34:13.259Z","last_posted_at":"2021-12-06T17:51:35.388Z","bumped":true,"bumped_at":"2021-12-06T17:51:35.388Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I put this thread here even though it’s only tangentially software related.  While sandify is AWESOME and the go to for geometric patterns, I am currently experimenting with generating at least portio…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1110,"like_count":12,"has_summary":false,"last_poster_username":"tigert10","category_id":34,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Right on. Thanks for the reply! \nI have done a similar route with creating the tool paths manually. I was hoping you would say that you discovered a new simple way to do this. I have been trying to ge…","last_post_id":201726,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":4556,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1911,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Looping gcode","id":6517,"title":"Looping gcode","slug":"looping-gcode","posts_count":31,"reply_count":2,"highest_post_number":31,"image_url":null,"created_at":"2017-10-03T13:12:34.000Z","last_posted_at":"2021-10-20T22:20:08.369Z","bumped":true,"bumped_at":"2021-10-20T22:20:08.369Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So, I’d like to loop through a sequence of patterns without user intervention. It looks like Marlin implements loading a new gcode file with the M23 command (M23 “filename”). Has anyone tried it? I’m …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":4706,"like_count":8,"has_summary":false,"last_poster_username":"jkendric","category_id":34,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thanks for the quick reply. Your last point was the one I actually came to in my own brain after posting.  Trying to go through the code to figure out how to forward serial monitor input on the pro mi…","last_post_id":197873,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1894,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":70,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8412,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Software für Raspberry Pi zum Steuern des Zen Tisches","id":29194,"title":"Software für Raspberry Pi zum Steuern des Zen Tisches","slug":"software-fur-raspberry-pi-zum-steuern-des-zen-tisches","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2021-09-12T12:01:27.816Z","last_posted_at":"2021-09-16T08:06:08.061Z","bumped":true,"bumped_at":"2021-09-16T08:06:08.061Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Guten Tag \nich bin auf der Suche nach einer Installationsanweisung um Sandify auf meinen Pi zu installieren. \nEs wurde das neueste Image von V1PI aufgelegt. \nEs wurde  npm und node.js installiert. (se…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":658,"like_count":0,"has_summary":false,"last_poster_username":"Breslauklaus","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Guten Tag \ndanke für die schnelle und ehrliche Antwort. \nIch möchte meinen Zen Tisch in der Garage betrieben. Dort möchte ich demnächst eine Longe für mich und meinen Freunden bauen. \nDiese ist 500m v…","last_post_id":194394,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":5765,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"ZenXY tmc2130… is stealthchop enabled?","id":28606,"title":"ZenXY tmc2130… is stealthchop enabled?","slug":"zenxy-tmc2130-is-stealthchop-enabled","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2021-07-30T04:08:08.183Z","last_posted_at":"2021-07-30T05:26:02.739Z","bumped":true,"bumped_at":"2021-07-30T05:26:02.739Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have been swamped at work lately, and got lazier than normal setting up my zenxy2. So I just loaded up the default hex file and haven’t even wrangled the parts together on a table yet. Doing a test …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":610,"like_count":1,"has_summary":false,"last_poster_username":"jeffeb3","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"No worries. I just didn’t understand the question.","last_post_id":190224,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6231,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Thinking about a “simple” UI for a zen table","id":26441,"title":"Thinking about a \"simple\" UI for a zen table","slug":"thinking-about-a-simple-ui-for-a-zen-table","posts_count":8,"reply_count":2,"highest_post_number":8,"image_url":null,"created_at":"2021-03-28T00:47:02.788Z","last_posted_at":"2021-03-28T22:56:15.133Z","bumped":true,"bumped_at":"2021-03-28T22:56:15.133Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I mentioned this in the next Zen table thread, but I have a friend who is going to be out of comission for a few months minimum for health reasons, and want to give him and his family a Zen XY table. …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1174,"like_count":5,"has_summary":false,"last_poster_username":"jeffeb3","category_id":34,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I was imagining something like: \nG0 J1 X10 Y10 \nFor moving at 10mm/s jog in X and Y. \nOr maybe \nG0 J10 I10 \nOr \nG0 J1.0 I1.0 F848 \nBut I don’t think the precise linear feedrate is as important for jog…","last_post_id":177584,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":4429,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3348,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2236,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Reflashing Board?","id":8378,"title":"Reflashing Board?","slug":"reflashing-board","posts_count":21,"reply_count":2,"highest_post_number":21,"image_url":null,"created_at":"2018-10-18T23:30:29.000Z","last_posted_at":"2021-01-15T19:16:24.268Z","bumped":true,"bumped_at":"2021-01-15T19:16:24.268Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello! I am trying to reflash my rambo 1.4 board with the firmware from the b_ramps_ZenXY folder, however as this is my first time working with any hardware, I am a bit out of my depth. I have the boa…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":2093,"like_count":5,"has_summary":false,"last_poster_username":"dmauch","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thank you that was very helpful and I have the mega2560 and ramps 1.4 running fine.  You were very helpful. \nDan Mauch","last_post_id":164953,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1854,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":482,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":268,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":6772,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Octopi Display","id":24149,"title":"Octopi Display","slug":"octopi-display","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2021-01-09T17:24:34.285Z","last_posted_at":"2021-01-09T20:24:57.565Z","bumped":true,"bumped_at":"2021-01-09T20:24:57.565Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve been using Octipi to serve up my gcode to the machine.  When running files created by Sandify the GCode Viewer screen doesn’t display anything.  Do any of you know what I need to add into the cod…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":677,"like_count":0,"has_summary":false,"last_poster_username":"jeffeb3","category_id":34,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"There are some cnc focused octoprint plugins, but I haven’t tried them. If there are any settings for showing travel moves, that would help. I don’t have high hopes with the default display though, be…","last_post_id":163517,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6729,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2236,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"raspberry pi","id":8705,"title":"raspberry pi","slug":"raspberry-pi","posts_count":24,"reply_count":0,"highest_post_number":24,"image_url":null,"created_at":"2018-11-28T14:46:42.000Z","last_posted_at":"2019-01-25T05:05:00.000Z","bumped":true,"bumped_at":"2020-08-21T21:25:07.883Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Has anyone front ended their sand table with a raspberry pi?  I have a Pi connected to my controller and I am getting ready to write the code, but didn’t want to re-invent the wheel if it has already …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":3400,"like_count":4,"has_summary":false,"last_poster_username":"jeffeb3","category_id":34,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Cool! keep me updated.","last_post_id":60130,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2018,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1846,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]}]}}