{"users":[{"id":2,"username":"vicious1","name":"Ryan","avatar_template":"/user_avatar/forum.v1e.com/vicious1/{size}/104426_2.png","admin":true,"moderator":true,"trust_level":4},{"id":14806,"username":"Robert_Bohlin","name":"Robert Bohlin","avatar_template":"/user_avatar/forum.v1e.com/robert_bohlin/{size}/115471_2.png","trust_level":0},{"id":8782,"username":"orob","name":"","avatar_template":"/user_avatar/forum.v1e.com/orob/{size}/62644_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":9253,"username":"MakerJim","name":"","avatar_template":"/user_avatar/forum.v1e.com/makerjim/{size}/87766_2.png","trust_level":3},{"id":14068,"username":"Jozef","name":"Jozef ","avatar_template":"/user_avatar/forum.v1e.com/jozef/{size}/104608_2.png","trust_level":1},{"id":13485,"username":"wcherry","name":"Wayne","avatar_template":"/letter_avatar_proxy/v4/letter/w/e99b99/{size}.png","trust_level":1},{"id":10827,"username":"Bartman","name":"","avatar_template":"/user_avatar/forum.v1e.com/bartman/{size}/63661_2.png","trust_level":3},{"id":14551,"username":"tron","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/t/3da27b/{size}.png","trust_level":0},{"id":54,"username":"dkj4linux","name":"dkj4linux","avatar_template":"/user_avatar/forum.v1e.com/dkj4linux/{size}/15860_2.png","trust_level":3},{"id":3692,"username":"ttraband","name":"Tom Traband","avatar_template":"/user_avatar/forum.v1e.com/ttraband/{size}/16479_2.png","trust_level":3},{"id":12037,"username":"Rafael_4996","name":"Rafael Silva","avatar_template":"/user_avatar/forum.v1e.com/rafael_4996/{size}/79686_2.png","trust_level":1},{"id":5647,"username":"SupraGuy","name":"Dan","avatar_template":"/user_avatar/forum.v1e.com/supraguy/{size}/37950_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14374,"username":"Viorel_ratoiu-radean","name":"Viorel ratoiu-radeanu","avatar_template":"/user_avatar/forum.v1e.com/viorel_ratoiu-radean/{size}/109916_2.png","trust_level":0},{"id":12184,"username":"Draggo","name":"Andrew H","avatar_template":"/user_avatar/forum.v1e.com/draggo/{size}/83727_2.png","trust_level":2},{"id":5226,"username":"Tokoloshe","name":"Philipp","avatar_template":"/user_avatar/forum.v1e.com/tokoloshe/{size}/26379_2.png","primary_group_name":"patrons","trust_level":3},{"id":12544,"username":"v3juggler","name":"","avatar_template":"/user_avatar/forum.v1e.com/v3juggler/{size}/103328_2.png","trust_level":3},{"id":6231,"username":"truglodite","name":"Kev","avatar_template":"/letter_avatar_proxy/v4/letter/t/f0a364/{size}.png","trust_level":2},{"id":313,"username":"jhitesma","name":"Jason","avatar_template":"/user_avatar/forum.v1e.com/jhitesma/{size}/38_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":11494,"username":"Colin_LightBurn","name":"Colin ","avatar_template":"/user_avatar/forum.v1e.com/colin_lightburn/{size}/72033_2.png","trust_level":2},{"id":6402,"username":"relytjames","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/r/7ea924/{size}.png","trust_level":1},{"id":3546,"username":"coppolajj","name":"","avatar_template":"/user_avatar/forum.v1e.com/coppolajj/{size}/16055_2.png","trust_level":2},{"id":10758,"username":"Mark_Kiwi","name":"Mark Kirker","avatar_template":"/user_avatar/forum.v1e.com/mark_kiwi/{size}/56910_2.png","trust_level":2},{"id":5102,"username":"dart1280","name":"Mike","avatar_template":"/user_avatar/forum.v1e.com/dart1280/{size}/56864_2.png","trust_level":2},{"id":8548,"username":"Dreyfus","name":"","avatar_template":"/user_avatar/forum.v1e.com/dreyfus/{size}/107209_2.png","trust_level":2},{"id":14147,"username":"Fran42","name":"Fran42","avatar_template":"/user_avatar/forum.v1e.com/fran42/{size}/107258_2.png","trust_level":1},{"id":12987,"username":"Babyshark155","name":"Christian Fallesen","avatar_template":"/letter_avatar_proxy/v4/letter/b/b3f665/{size}.png","trust_level":2},{"id":9012,"username":"CesarH","name":"cesar","avatar_template":"/user_avatar/forum.v1e.com/cesarh/{size}/60720_2.png","trust_level":3},{"id":9150,"username":"tcartner","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/t/5daacb/{size}.png","trust_level":0},{"id":12273,"username":"wiremonkey","name":"Tyler","avatar_template":"/user_avatar/forum.v1e.com/wiremonkey/{size}/103263_2.png","trust_level":0},{"id":13450,"username":"caboverde","name":"","avatar_template":"/user_avatar/forum.v1e.com/caboverde/{size}/100665_2.png","trust_level":1},{"id":12653,"username":"dos","name":"Daryl","avatar_template":"/user_avatar/forum.v1e.com/dos/{size}/92778_2.png","trust_level":2},{"id":4103,"username":"Jonathjon","name":"Jonathan Jones","avatar_template":"/user_avatar/forum.v1e.com/jonathjon/{size}/70532_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":2604,"username":"johnboiles","name":"John Boiles","avatar_template":"/user_avatar/forum.v1e.com/johnboiles/{size}/303_2.png","trust_level":2},{"id":6973,"username":"kfr","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/k/e0b2c6/{size}.png","trust_level":1},{"id":2666,"username":"jlirochon","name":"Julien","avatar_template":"/letter_avatar_proxy/v4/letter/j/a183cd/{size}.png","trust_level":1},{"id":353,"username":"jeffeb3","name":"Jeffeb3","avatar_template":"/user_avatar/forum.v1e.com/jeffeb3/{size}/91905_2.png","trust_level":4},{"id":3348,"username":"robertbu","name":"Robert Bunney","avatar_template":"/user_avatar/forum.v1e.com/robertbu/{size}/62426_2.png","trust_level":2},{"id":11656,"username":"Stoli","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/a3d4f5/{size}.png","trust_level":2},{"id":11259,"username":"jeyeager","name":"Jason Yeager","avatar_template":"/user_avatar/forum.v1e.com/jeyeager/{size}/71643_2.png","trust_level":3},{"id":13200,"username":"Aki_Haaslahti","name":"Aki Haaslahti","avatar_template":"/user_avatar/forum.v1e.com/aki_haaslahti/{size}/98283_2.png","trust_level":0},{"id":3300,"username":"ppavone","name":"Paul","avatar_template":"/user_avatar/forum.v1e.com/ppavone/{size}/373_2.png","trust_level":1},{"id":13026,"username":"Angel_Octavio_Cruz_M","name":"Angel Octavio Cruz Martínez","avatar_template":"/user_avatar/forum.v1e.com/angel_octavio_cruz_m/{size}/96799_2.png","trust_level":1},{"id":11435,"username":"RegPye","name":"Reg Pye","avatar_template":"/user_avatar/forum.v1e.com/regpye/{size}/71319_2.png","trust_level":2},{"id":11525,"username":"Esloch_Ettounsi","name":"Esloch Ettounsi","avatar_template":"/user_avatar/forum.v1e.com/esloch_ettounsi/{size}/72407_2.png","trust_level":1},{"id":1108,"username":"timonjkl","name":"Tim W","avatar_template":"/user_avatar/forum.v1e.com/timonjkl/{size}/111103_2.png","trust_level":3},{"id":8581,"username":"RockinRiley","name":"Riley","avatar_template":"/user_avatar/forum.v1e.com/rockinriley/{size}/52190_2.png","trust_level":3},{"id":12512,"username":"Ahanes54","name":"Andrew","avatar_template":"/user_avatar/forum.v1e.com/ahanes54/{size}/89272_2.png","trust_level":1},{"id":5491,"username":"Sabotage37","name":"Zach","avatar_template":"/user_avatar/forum.v1e.com/sabotage37/{size}/25255_2.png","trust_level":2},{"id":7147,"username":"DougJoseph","name":"Doug Joseph (design8studio)","avatar_template":"/user_avatar/forum.v1e.com/dougjoseph/{size}/34670_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":7727,"username":"jhinkle37","name":"jim hinkle","avatar_template":"/user_avatar/forum.v1e.com/jhinkle37/{size}/87511_2.png","trust_level":1},{"id":11812,"username":"foppkn","name":"","avatar_template":"/user_avatar/forum.v1e.com/foppkn/{size}/77628_2.png","trust_level":0}],"primary_groups":[{"id":41,"name":"patrons"}],"flair_groups":[{"id":41,"name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/software/grbl/40?page=1","per_page":30,"top_tags":["laser"],"topics":[{"fancy_title":"About the GRBL category","id":24000,"title":"About the GRBL category","slug":"about-the-grbl-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2021-01-06T03:09:02.682Z","last_posted_at":null,"bumped":true,"bumped_at":"2021-01-06T04:43:37.946Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Discussions about any of the grbl varieties are a good fit here. \nAs you may know, Marlin is the preferred firmware around here, but grbl is another excellent option. It comes in a few varieties: \nThe…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":870,"like_count":3,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Discussions about any of the grbl varieties are a good fit here. \nAs you may know, Marlin is the preferred firmware around here, but grbl is another excellent option. It comes in a few varieties: \nThe main grbl code is a&hellip;","last_post_id":162805,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Cnc soldermask milling","id":53870,"title":"Cnc soldermask milling","slug":"cnc-soldermask-milling","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-04-18T08:23:06.248Z","last_posted_at":"2026-04-19T12:39:42.827Z","bumped":true,"bumped_at":"2026-04-19T12:39:42.827Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi \ni am new here, \nI have a cnc 3018 and struggling with soldermask milling. \nThe problem is that sometimes the springbit cuts through the copper and sometimes it works fine. \nsteps i do: \n1 heightma…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":90,"like_count":1,"has_summary":false,"last_poster_username":"Robert_Bohlin","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"It seems that it was my spoil board that wasn´t totally flat. I flattened it and run -0.0008 mm with the spring bit and success.","last_post_id":428530,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14806,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Tangential cutting","id":51653,"title":"Tangential cutting","slug":"tangential-cutting","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":null,"created_at":"2025-10-23T13:43:24.712Z","last_posted_at":"2026-02-23T15:31:45.010Z","bumped":true,"bumped_at":"2026-02-23T15:31:45.010Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, is anyone interested in tangential cutting with oscillation using GRBL and Arduino Mega? I’m writing and planning something but I don’t know if I’m doing it for nothing…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":166,"like_count":5,"has_summary":false,"last_poster_username":"Bartman","category_id":40,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"You marked @wcherry’s post as a solution to your question. \n  \nThis was done by checking the Solution box in his post (sample from one of my threads…) \n  \n@wcherry didn’t really answer your question,…","last_post_id":417369,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14068,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":13485,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10827,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Linux does not connect to CNC","id":53034,"title":"Linux does not connect to CNC","slug":"linux-does-not-connect-to-cnc","posts_count":9,"reply_count":2,"highest_post_number":9,"image_url":null,"created_at":"2026-01-25T21:15:36.843Z","last_posted_at":"2026-01-26T22:50:40.302Z","bumped":true,"bumped_at":"2026-01-26T22:50:40.302Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, having a problem connecting to a brand new machine, never before connected/run. \nLAPTOP: Dell Latitude 5550, i5-5200U CPU @ 2.20GHz x 2 \nOPERATING SYSTEM: Linux Mint 21, Cinnamon 5.4.12, Kernel: 5…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":100,"like_count":1,"has_summary":false,"last_poster_username":"MakerJim","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Last time I ran into something like this, it was because a chineseum controller had misappropriated the USB VID of a different device rather than go through the minor expense of registering their own…","last_post_id":413114,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14551,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":54,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to connect these limit switches in series?","id":43415,"title":"How to connect these limit switches in series?","slug":"how-to-connect-these-limit-switches-in-series","posts_count":33,"reply_count":27,"highest_post_number":34,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/6/163df3bfc098aa2121f26a12eea8346c9b274cdf.jpeg","created_at":"2024-04-15T01:56:23.869Z","last_posted_at":"2026-03-03T21:23:01.340Z","bumped":true,"bumped_at":"2025-12-10T02:29:11.386Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Well, I’m assembling a CNC and I need to add the limit switches, but I’m unsure. \nLet me explain, the CNC works in a CoreXY way, which means that two motors work in sync. For each limit I intend to pl…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":554,"height":554,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/6/163df3bfc098aa2121f26a12eea8346c9b274cdf.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/6/163df3bfc098aa2121f26a12eea8346c9b274cdf_2_400x400.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/6/163df3bfc098aa2121f26a12eea8346c9b274cdf_2_200x200.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/6/163df3bfc098aa2121f26a12eea8346c9b274cdf_2_100x100.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/6/163df3bfc098aa2121f26a12eea8346c9b274cdf_2_50x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":2995,"like_count":8,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":225,"green":199,"blue":197},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":421704,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12037,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":14374,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Getting GRBLHal working on SKR Pro 1.2","id":49928,"title":"Getting GRBLHal working on SKR Pro 1.2","slug":"getting-grblhal-working-on-skr-pro-1-2","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2025-06-21T14:21:38.196Z","last_posted_at":"2025-12-06T23:41:05.170Z","bumped":true,"bumped_at":"2025-12-06T23:41:05.170Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi all, \nI’m working on getting the GRBLHal firmware for the SKR Pro 1.2 working. So far, I have it flashing nicely, and I can connect to the controller using gsender, and I’m able to move the stepper…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":203,"like_count":3,"has_summary":false,"last_poster_username":"v3juggler","category_id":40,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Andrew, did it all work in the end? What’s your opinion on GRBLHal? I’m thinking about it because of MillMage - I’d like to try it on my LR3… \nSidenote: Look above guys! Toko hinting at blasphemy! <img src=\"https://forum.v1e.com/images/emoji/google/wink.png?v=14\" title=\":wink:\" class=\"emoji\" alt=\":wink:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":405028,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12184,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":12544,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Controlling Needle Cutter Throttle with GCODE","id":51455,"title":"Controlling Needle Cutter Throttle with GCODE","slug":"controlling-needle-cutter-throttle-with-gcode","posts_count":55,"reply_count":33,"highest_post_number":55,"image_url":null,"created_at":"2025-10-09T19:37:21.786Z","last_posted_at":"2025-11-13T19:32:43.156Z","bumped":true,"bumped_at":"2025-11-13T19:32:43.156Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My primo has a working VFD spindle (T0) and a working laser diode (T1). This week I’m working on getting a needle cutter working as well. I’ve read all the guides and have a servo tester, but I figure…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":480,"like_count":47,"has_summary":true,"last_poster_username":"truglodite","category_id":40,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I was playing with settings in lightburn and managed to produce gcode that did not retract between cuts. The setting that did it is “optimize z moves”. Turning that off gave the proper behavior for ne…","last_post_id":401889,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":6231,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Accepted Answer","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":313,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":54,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11494,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FluidNC and MKS TinyBee","id":32841,"title":"FluidNC and MKS TinyBee","slug":"fluidnc-and-mks-tinybee","posts_count":36,"reply_count":18,"highest_post_number":36,"image_url":null,"created_at":"2022-05-17T21:55:06.714Z","last_posted_at":"2025-11-01T13:08:09.720Z","bumped":true,"bumped_at":"2025-11-01T13:08:09.720Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone, \nFigure I would do a quick write-up to help anyone else that might be looking for this information. I wanted to make the switch to GRBL, but was having issues with the Rambo 1.4 board. I…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":18006,"like_count":22,"has_summary":false,"last_poster_username":"Dreyfus","category_id":40,"op_like_count":7,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"You need to start a new thread and ask there. Your question isn’t really anything to do with the topic of this thread.","last_post_id":400244,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6402,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3546,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10758,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5102,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8548,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Grbl disable y stepper while homing x","id":51424,"title":"Grbl disable y stepper while homing x","slug":"grbl-disable-y-stepper-while-homing-x","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2025-10-06T18:22:34.731Z","last_posted_at":"2025-10-06T20:04:57.975Z","bumped":true,"bumped_at":"2025-10-06T20:04:57.975Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hello \nmy first post on this forum <img src=\"https://forum.v1e.com/images/emoji/google/slight_smile.png?v=14\" title=\":slight_smile:\" class=\"emoji\" alt=\":slight_smile:\" loading=\"lazy\" width=\"20\" height=\"20\"> \ni have a weird question, not sure if its possible but maybe there is a workaround \nso here is the fun, i’m building a polar sand table (a dune weaver) the original…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":79,"like_count":3,"has_summary":false,"last_poster_username":"Fran42","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"hello \nmany tanks for responding so quickly \nthe problem i have is not from the code, i have activated grbl to run first x and then y the sequence is working as it should, the problem is mechanical, \ni…","last_post_id":397077,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14147,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10827,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Neje E40 settings spreadsheet","id":49927,"title":"Neje E40 settings spreadsheet","slug":"neje-e40-settings-spreadsheet","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2025-06-21T07:21:00.209Z","last_posted_at":"2025-06-21T13:09:41.973Z","bumped":true,"bumped_at":"2025-06-21T13:16:03.951Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone. \nI have bought a Neje E40 80W laser. From my time with resin printing there was a database with machine-defined settings with different materials. isn’t there one like that for lasers too…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":105,"like_count":0,"has_summary":false,"last_poster_username":"CesarH","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"he has a neje a40640 (that is similar to the e40) but it doesnt have as many materials tested. (also entered to see if he updated  it and he did, but paywalled it so lol? \nOp should get some materials…","last_post_id":384960,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12987,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":8548,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9012,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"GRBL probe inaccuracy&hellip; a fix","id":25743,"title":"GRBL probe inaccuracy... a fix","slug":"grbl-probe-inaccuracy-a-fix","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/7/473042183f7703fd3f9811d892cbe13bff1946dc.png","created_at":"2021-02-26T21:44:39.031Z","last_posted_at":"2025-06-10T00:50:33.653Z","bumped":true,"bumped_at":"2025-06-10T00:54:58.691Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So I have been dialing in my process for milling PCB’s which involves a leveling routing using bCNC, to compensate for warpage in the xy plane. So far my results are decent, but I had a sneaking suspi…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":460,"height":460,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/7/473042183f7703fd3f9811d892cbe13bff1946dc.png"},{"max_width":400,"max_height":400,"width":400,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/7/473042183f7703fd3f9811d892cbe13bff1946dc_2_400x400.png"},{"max_width":200,"max_height":200,"width":200,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/7/473042183f7703fd3f9811d892cbe13bff1946dc_2_200x200.png"},{"max_width":100,"max_height":100,"width":100,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/7/473042183f7703fd3f9811d892cbe13bff1946dc_2_100x100.png"},{"max_width":50,"max_height":50,"width":50,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/7/473042183f7703fd3f9811d892cbe13bff1946dc_2_50x50.png"}],"tags":[],"tags_descriptions":{},"views":2082,"like_count":1,"has_summary":false,"last_poster_username":"wiremonkey","category_id":40,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":46,"green":40,"blue":22},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hey, \nThanks for posting this. I know this is old, but I’m having some real questions about prbz in bCNC. If I run the following macro in a bCNC button: \nG91 \nG38.2 Z-5 F100 \nG10 L20 P1 Z[prbz] \nG90 \nI…","last_post_id":384016,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6231,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9150,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":12273,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Dimensions changed 50%, drawing to effective cutting","id":49346,"title":"Dimensions changed 50%, drawing to effective cutting","slug":"dimensions-changed-50-drawing-to-effective-cutting","posts_count":16,"reply_count":12,"highest_post_number":20,"image_url":null,"created_at":"2025-05-01T21:37:22.352Z","last_posted_at":"2025-05-02T19:08:11.545Z","bumped":true,"bumped_at":"2025-05-02T19:08:11.545Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have entered a drawing of 100mm x 50mm in the estlcam, perfect everything fine. Then exported to the estlcam controller, it is grbl arduino. Now that I start engraving the drawing is cut out for 50%…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":145,"like_count":5,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Okay, what was the solution?","last_post_id":380368,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":13450,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12653,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":9012,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Grbl on RAMBo w/ Dual Endstops!","id":10981,"title":"Grbl on RAMBo w/ Dual Endstops!","slug":"grbl-on-rambo-w-dual-endstops","posts_count":304,"reply_count":168,"highest_post_number":308,"image_url":null,"created_at":"2019-07-28T14:35:34.000Z","last_posted_at":"2025-04-12T23:21:12.801Z","bumped":true,"bumped_at":"2025-04-12T23:21:12.801Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"tl;dr I have Grbl working on my MPCNC + RAMBo with full dual-endstop support! I’d love it if other people could give it a try! \nI built upon to the great work from @enducross (and GitHub user @fra589)…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":26612,"like_count":133,"has_summary":true,"last_poster_username":"robertbu","category_id":40,"op_like_count":13,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I second Dreyfus that starting a new topic is the best pathway to an answer.  As a guess, the job origin defined is CAM is probably as the middle of your stock rather than the bottom left corner.  If …","last_post_id":378173,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2604,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6973,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2666,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3348,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"GRBL Travel Speed","id":48658,"title":"GRBL Travel Speed","slug":"grbl-travel-speed","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":null,"created_at":"2025-03-17T17:30:30.400Z","last_posted_at":"2025-03-17T20:03:44.201Z","bumped":true,"bumped_at":"2025-03-17T20:03:44.201Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Does anyone know the formula(s) that FluidNC uses to determine motor speeds when approaching and departing from gcode vertices? My time estimates for long plots can be way off and I’m trying to come u…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":139,"like_count":1,"has_summary":false,"last_poster_username":"Stoli","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Yeah, I don’t think we need to get in the weeds here. I think if we look at the difference between the entry and exit vector at each point in the gcode and apply a simple decel/accel formula we should…","last_post_id":375130,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":11656,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mechanical Brake on Z-axis","id":48022,"title":"Mechanical Brake on Z-axis","slug":"mechanical-brake-on-z-axis","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2025-02-11T05:06:54.499Z","last_posted_at":"2026-03-03T14:33:14.490Z","bumped":true,"bumped_at":"2025-02-14T13:28:14.831Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a problem with my arduino grbl cnc project. I have a big old japanese milling machine which I am going to upgrade with cnc controls. Machines X, Y and Z movements run with hydraulic power, but …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":180,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":419932,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":13200,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How many enstops with FluidNC PRIMO and tinybee V1","id":47976,"title":"How many enstops with FluidNC PRIMO and tinybee V1","slug":"how-many-enstops-with-fluidnc-primo-and-tinybee-v1","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2025-02-09T02:18:21.867Z","last_posted_at":"2026-03-03T14:33:14.075Z","bumped":true,"bumped_at":"2025-02-09T04:32:46.597Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is it true that I am limited to 5 endstops with this board? The problem is I don’t know how to home the machine in Z with only a probe. How do I fix the firmware to tell it to use the probe. With dual…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":121,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":419929,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":3300,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MKS DLC32 FLUIDNC RELAY SPINDLE","id":47401,"title":"MKS DLC32 FLUIDNC RELAY SPINDLE","slug":"mks-dlc32-fluidnc-relay-spindle","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-01-09T07:28:53.319Z","last_posted_at":"2026-03-03T14:34:24.525Z","bumped":true,"bumped_at":"2025-01-09T07:28:53.369Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Se que  es posible usar caulquier pin libre para mandar una señal a un relevaor de estado solido , relay o mosfet para activar un spindle … \npero la verdad es que no , puedo hacerlo funcionar actualme…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":144,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420141,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":13026,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Homing problem","id":47233,"title":"Homing problem","slug":"homing-problem","posts_count":10,"reply_count":7,"highest_post_number":10,"image_url":null,"created_at":"2024-12-31T06:20:34.049Z","last_posted_at":"2026-03-03T14:34:32.276Z","bumped":true,"bumped_at":"2025-01-08T22:05:29.487Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just built a new laser machine, \nThis one has limits at both ends on the X and Y and a single limit on the +Z \nWhen I press a limit switch by hand it works, but is very slow to display on LaserGRBL. …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":293,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420189,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11435,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Add a probe to a laser module","id":46748,"title":"Add a probe to a laser module","slug":"add-a-probe-to-a-laser-module","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-12-01T01:05:33.924Z","last_posted_at":"2026-03-03T14:35:28.511Z","bumped":true,"bumped_at":"2024-12-01T01:05:33.977Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I want to add a probe to a laser module to help with focusing. \nI have ordered a capacitive sensor to give it a go. \nI use GRBL 1.1h with config.h lines 129 and 155 modified for my machine. \nI think t…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":80,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420367,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11435,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Commissioning a new laser build - need help","id":46115,"title":"Commissioning a new laser build - need help","slug":"commissioning-a-new-laser-build-need-help","posts_count":25,"reply_count":17,"highest_post_number":25,"image_url":null,"created_at":"2024-10-31T07:31:36.433Z","last_posted_at":"2026-03-03T14:37:16.902Z","bumped":true,"bumped_at":"2024-11-12T02:01:28.958Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just wired up a new machine and when commissioning it I found a strange problem. \nI can home no problem. When I move the X axis in a positive direction it works fine but when I try to move back agai…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":347,"like_count":4,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420605,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":11435,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12653,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3348,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Starting with MKS DLC32","id":41732,"title":"Starting with MKS DLC32","slug":"starting-with-mks-dlc32","posts_count":41,"reply_count":21,"highest_post_number":41,"image_url":null,"created_at":"2024-01-04T20:48:49.692Z","last_posted_at":"2026-03-03T21:27:02.100Z","bumped":true,"bumped_at":"2024-10-17T07:23:17.698Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Good evening, \nIt’s for my DIY CNC Plotter/Laser project… My MKS DLC32 board is currently being delivered (according to the tracking, it will arrive in a week). I still have quite a few questions abou…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":15566,"like_count":32,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":422415,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11525,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"GRBL Laser: Spindle Control","id":25073,"title":"GRBL Laser: Spindle Control","slug":"grbl-laser-spindle-control","posts_count":28,"reply_count":19,"highest_post_number":28,"image_url":null,"created_at":"2021-02-04T18:32:03.668Z","last_posted_at":"2024-10-15T22:44:13.309Z","bumped":true,"bumped_at":"2024-10-15T22:44:13.309Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"On my primo, I’m running enducross’s grbl5x, which by default uses d44 for spindle pwm. So with laser mode enabled, if I reboot the controller the laser goes full power for a few seconds (d44 goes hig…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":["laser"],"tags_descriptions":{},"views":7368,"like_count":13,"has_summary":false,"last_poster_username":"ttraband","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"To be clear, what I’ve done on mine is to plug the Z endstop to what’s marked on the board as SpinEn, and the PWM pin on the Z endstop. Versions of grbl after 0.9i (I think, not 100% sure of the lette…","last_post_id":347986,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6231,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1108,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":54,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5102,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Z + limit for laser question","id":45710,"title":"Z + limit for laser question","slug":"z-limit-for-laser-question","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-10-12T11:56:52.796Z","last_posted_at":"2026-03-03T14:38:09.951Z","bumped":true,"bumped_at":"2024-10-12T12:26:05.682Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am setting up a new laser machine. \nI have designed it to have limits on X Y and Z. \nThe controller is GRBL 1.1f and using a Uno and a CNC shield 3.0 with a GRBL buffer for the limits (817 isolators…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":80,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420783,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11435,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"GRBL and offset for crosshair laser","id":45540,"title":"GRBL and offset for crosshair laser","slug":"grbl-and-offset-for-crosshair-laser","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-10-06T00:15:58.340Z","last_posted_at":"2026-03-03T14:38:28.685Z","bumped":true,"bumped_at":"2024-10-06T00:49:55.964Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am building a new laser engraver/cutter and have purchased a Two Trees K30 30 watt laser module. \nI will be using GRBL 1.1h on the machine, but I have no idea how I can take advantage of the crossha…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":114,"like_count":1,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420851,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11435,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Common limit switch problem","id":44219,"title":"Common limit switch problem","slug":"common-limit-switch-problem","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/9/79bd05ba20633c29dc2551391f3b80e9775cb249_2_1024x444.png","created_at":"2024-06-18T19:47:59.580Z","last_posted_at":"2026-03-03T21:09:16.633Z","bumped":true,"bumped_at":"2024-09-20T15:04:09.708Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m trying to insert homing function on my CNC machine, but when give command $H it appears: \n“An unexpected error was detected: (ALARM:1) Hard limit has been triggered. Machine position is likely los…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1040,"height":451,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/7/9/79bd05ba20633c29dc2551391f3b80e9775cb249.png"},{"max_width":1024,"max_height":1024,"width":1024,"height":444,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/9/79bd05ba20633c29dc2551391f3b80e9775cb249_2_1024x444.png"},{"max_width":800,"max_height":800,"width":800,"height":346,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/9/79bd05ba20633c29dc2551391f3b80e9775cb249_2_800x346.png"},{"max_width":400,"max_height":400,"width":400,"height":173,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/9/79bd05ba20633c29dc2551391f3b80e9775cb249_2_400x173.png"},{"max_width":200,"max_height":200,"width":200,"height":86,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/9/79bd05ba20633c29dc2551391f3b80e9775cb249_2_200x86.png"},{"max_width":100,"max_height":100,"width":100,"height":43,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/9/79bd05ba20633c29dc2551391f3b80e9775cb249_2_100x43.png"},{"max_width":50,"max_height":50,"width":50,"height":21,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/9/79bd05ba20633c29dc2551391f3b80e9775cb249_2_50x21.png"}],"tags":[],"tags_descriptions":{},"views":1328,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":221,"green":221,"blue":220},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Closing old topics to limit spambots","last_post_id":421325,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12037,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8581,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Another SCARA build","id":45270,"title":"Another SCARA build","slug":"another-scara-build","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2024-09-14T17:34:44.356Z","last_posted_at":"2026-03-03T14:39:15.562Z","bumped":true,"bumped_at":"2024-09-16T11:30:59.302Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello all.  I have been reading these posts for a while and had to try building a SCARA machine.  I used the Rob Dobson design, A New SandBot | robdobson.com, and I am running into trouble making it f…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":301,"like_count":1,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420965,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12512,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gcode Help - Estlcam to Easel","id":45209,"title":"Gcode Help - Estlcam to Easel","slug":"gcode-help-estlcam-to-easel","posts_count":11,"reply_count":6,"highest_post_number":11,"image_url":null,"created_at":"2024-09-10T15:38:50.429Z","last_posted_at":"2026-03-03T14:39:15.428Z","bumped":true,"bumped_at":"2024-09-11T00:53:03.373Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hoping to get a slight bit of help here. Short story long. \nI am trying to do a 3D carve that I have wanted to do for a long time. Fusion360 is being dumb, no clue why. I cannot get it to calculate th…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":185,"like_count":3,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":420964,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":5491,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3348,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7147,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lightburn and/or Fluidnc?","id":44976,"title":"Lightburn and/or Fluidnc?","slug":"lightburn-and-or-fluidnc","posts_count":7,"reply_count":3,"highest_post_number":7,"image_url":null,"created_at":"2024-08-27T00:46:07.321Z","last_posted_at":"2026-03-03T14:39:34.427Z","bumped":true,"bumped_at":"2024-08-27T02:14:20.826Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, I’m new here… \nI have a question on Lightburn.  Do I need to run Fludinc for CNC routing, or is Lightburn capable of running CNC as well? I don’t recall seeing a CNC option in Lightbur…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":327,"like_count":4,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":421044,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":7727,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"WIFI communication at CNC/GRBL","id":44308,"title":"WIFI communication at CNC/GRBL","slug":"wifi-communication-at-cnc-grbl","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/e/5/e52e950766b23828d7fff1e25dfc15817f6d7a0e.jpeg","created_at":"2024-06-27T13:16:02.272Z","last_posted_at":"2026-03-03T21:09:11.675Z","bumped":true,"bumped_at":"2024-06-28T17:29:43.563Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, could anyone tell me if the CNC Shield V3 board is compatible with the Arduino Uno wifi board? I wanted to control my CNC via computer or smartphone via wifi, send gcodes, etc. \nI tried t…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":348,"height":568,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/e/5/e52e950766b23828d7fff1e25dfc15817f6d7a0e.jpeg"},{"max_width":400,"max_height":400,"width":245,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/5/e52e950766b23828d7fff1e25dfc15817f6d7a0e_2_245x400.jpeg"},{"max_width":200,"max_height":200,"width":122,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/5/e52e950766b23828d7fff1e25dfc15817f6d7a0e_2_122x200.jpeg"},{"max_width":100,"max_height":100,"width":61,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/5/e52e950766b23828d7fff1e25dfc15817f6d7a0e_2_61x100.jpeg"},{"max_width":50,"max_height":50,"width":30,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/5/e52e950766b23828d7fff1e25dfc15817f6d7a0e_2_30x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":468,"like_count":3,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":162,"green":138,"blue":124},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Closing old topics to limit spambots","last_post_id":421298,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12037,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Estlcam wont turn spindle on","id":42507,"title":"Estlcam wont turn spindle on","slug":"estlcam-wont-turn-spindle-on","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2024-02-15T11:21:22.519Z","last_posted_at":"2026-03-03T21:25:27.005Z","bumped":true,"bumped_at":"2024-02-23T15:12:03.294Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, im new here. Hello all. Ive installed estlcam everything it works great except the spindle wont turn on. I know the spindle is ok because it ran in easel. But now easel wont recognise my machine. …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":344,"like_count":1,"has_summary":false,"last_poster_username":"vicious1","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":422077,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11812,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5102,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]}]}}