{"users":[{"id":2,"username":"vicious1","name":"Ryan","avatar_template":"/user_avatar/forum.v1e.com/vicious1/{size}/104426_2.png","admin":true,"moderator":true,"trust_level":4},{"id":14998,"username":"SirAires_Quinton","name":"SirAires Quinton","avatar_template":"/user_avatar/forum.v1e.com/siraires_quinton/{size}/99346_2.png","trust_level":1},{"id":9253,"username":"MakerJim","name":"","avatar_template":"/user_avatar/forum.v1e.com/makerjim/{size}/87766_2.png","trust_level":3},{"id":15156,"username":"James_Keillor","name":"nostranger","avatar_template":"/user_avatar/forum.v1e.com/james_keillor/{size}/101562_2.png","trust_level":1},{"id":11656,"username":"Stoli","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/a3d4f5/{size}.png","trust_level":2},{"id":10238,"username":"vincentw56","name":"Vincent Wright","avatar_template":"/user_avatar/forum.v1e.com/vincentw56/{size}/106564_2.png","trust_level":3},{"id":2250,"username":"zerg32","name":"Serg","avatar_template":"/user_avatar/forum.v1e.com/zerg32/{size}/91257_2.png","trust_level":2},{"id":7286,"username":"Britt","name":"Britt Percival","avatar_template":"/user_avatar/forum.v1e.com/britt/{size}/62440_2.png","trust_level":3},{"id":11259,"username":"jeyeager","name":"Jason Yeager","avatar_template":"/user_avatar/forum.v1e.com/jeyeager/{size}/71643_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14952,"username":"juliusvaart","name":"","avatar_template":"/user_avatar/forum.v1e.com/juliusvaart/{size}/116925_2.png","trust_level":3},{"id":11638,"username":"spsully2582","name":"","avatar_template":"/user_avatar/forum.v1e.com/spsully2582/{size}/74139_2.png","trust_level":3},{"id":14803,"username":"Tiggr","name":"Marcus","avatar_template":"/user_avatar/forum.v1e.com/tiggr/{size}/115355_2.png","trust_level":2},{"id":3337,"username":"coinbird","name":"Coin Bahd","avatar_template":"/user_avatar/forum.v1e.com/coinbird/{size}/74894_2.png","trust_level":2},{"id":15055,"username":"iq0099","name":"Abu Ali","avatar_template":"/letter_avatar_proxy/v4/letter/i/ba9def/{size}.png","trust_level":2},{"id":15105,"username":"S_HHH","name":"S HHH","avatar_template":"/user_avatar/forum.v1e.com/s_hhh/{size}/118510_2.png","trust_level":1},{"id":15175,"username":"Casgle","name":"Casgle","avatar_template":"/user_avatar/forum.v1e.com/casgle/{size}/77735_2.png","trust_level":1},{"id":1936,"username":"tailslide","name":"Greg","avatar_template":"/user_avatar/forum.v1e.com/tailslide/{size}/16162_2.png","trust_level":2},{"id":2373,"username":"dwkisker","name":"Dave K","avatar_template":"/user_avatar/forum.v1e.com/dwkisker/{size}/92548_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":9668,"username":"Nickbwilson","name":"Nick wilson","avatar_template":"/letter_avatar_proxy/v4/letter/n/bc8723/{size}.png","trust_level":1},{"id":9435,"username":"Mattman","name":"Matt K","avatar_template":"/letter_avatar_proxy/v4/letter/m/e47774/{size}.png","trust_level":2},{"id":9012,"username":"CesarH","name":"cesar","avatar_template":"/user_avatar/forum.v1e.com/cesarh/{size}/60720_2.png","trust_level":3},{"id":11772,"username":"Marko_Niitsoo","name":"Marko Niitsoo","avatar_template":"/user_avatar/forum.v1e.com/marko_niitsoo/{size}/76983_2.png","trust_level":1},{"id":10974,"username":"Keegan","name":"Keegan M","avatar_template":"/user_avatar/forum.v1e.com/keegan/{size}/64050_2.png","trust_level":2},{"id":8548,"username":"Dreyfus","name":"","avatar_template":"/user_avatar/forum.v1e.com/dreyfus/{size}/107209_2.png","trust_level":2},{"id":13989,"username":"heiserhorn","name":"Mike","avatar_template":"/user_avatar/forum.v1e.com/heiserhorn/{size}/111091_2.png","trust_level":2},{"id":10185,"username":"waimea","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/w/df788c/{size}.png","trust_level":3},{"id":14940,"username":"DaveE","name":null,"avatar_template":"/user_avatar/forum.v1e.com/davee/{size}/117468_2.png","trust_level":1},{"id":14528,"username":"kyleschoen","name":"Kyle","avatar_template":"/user_avatar/forum.v1e.com/kyleschoen/{size}/112041_2.png","trust_level":2},{"id":11649,"username":"Swayze","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/ba9def/{size}.png","trust_level":2},{"id":3692,"username":"ttraband","name":"Tom Traband","avatar_template":"/user_avatar/forum.v1e.com/ttraband/{size}/16479_2.png","trust_level":3},{"id":15092,"username":"Soaringhigher","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/7bcc69/{size}.png","trust_level":1},{"id":6808,"username":"FremanW","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/f/f14d63/{size}.png","trust_level":1},{"id":5226,"username":"Tokoloshe","name":"Philipp","avatar_template":"/user_avatar/forum.v1e.com/tokoloshe/{size}/26379_2.png","primary_group_name":"patrons","trust_level":3},{"id":14936,"username":"Chris2","name":"Chris ","avatar_template":"/user_avatar/forum.v1e.com/chris2/{size}/101393_2.png","trust_level":0},{"id":3142,"username":"kvcummins","name":"K Cummins","avatar_template":"/user_avatar/forum.v1e.com/kvcummins/{size}/16030_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":6606,"username":"CABix","name":"Craig Bixler","avatar_template":"/user_avatar/forum.v1e.com/cabix/{size}/104561_2.png","trust_level":3},{"id":10335,"username":"breese","name":"Robert Gene Reese","avatar_template":"/user_avatar/forum.v1e.com/breese/{size}/57586_2.png","trust_level":2},{"id":7877,"username":"TMathews","name":"Todd Mathews","avatar_template":"/letter_avatar_proxy/v4/letter/t/c67d28/{size}.png","trust_level":2},{"id":13519,"username":"Ron001","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/r/3d9bf3/{size}.png","trust_level":2},{"id":4103,"username":"Jonathjon","name":"Jonathan Jones","avatar_template":"/user_avatar/forum.v1e.com/jonathjon/{size}/70532_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":12677,"username":"Terry_O_Sullivan","name":"Terry O'Sullivan","avatar_template":"/user_avatar/forum.v1e.com/terry_o_sullivan/{size}/92154_2.png","trust_level":3},{"id":15034,"username":"mwworks","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/m/4bbf92/{size}.png","trust_level":0},{"id":8581,"username":"RockinRiley","name":"Riley","avatar_template":"/user_avatar/forum.v1e.com/rockinriley/{size}/52190_2.png","trust_level":3},{"id":1108,"username":"timonjkl","name":"Tim W","avatar_template":"/user_avatar/forum.v1e.com/timonjkl/{size}/111103_2.png","trust_level":3},{"id":14820,"username":"lawsjr","name":"Ronnie","avatar_template":"/letter_avatar_proxy/v4/letter/l/b9e5f3/{size}.png","trust_level":1},{"id":11536,"username":"Octimusocti","name":"","avatar_template":"/user_avatar/forum.v1e.com/octimusocti/{size}/72481_2.png","trust_level":2},{"id":2201,"username":"tlumppy","name":"Tim","avatar_template":"/letter_avatar_proxy/v4/letter/t/59ef9b/{size}.png","trust_level":2}],"primary_groups":[{"id":41,"name":"patrons"}],"flair_groups":[{"id":41,"name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/software/fluidnc/43?page=1","per_page":30,"top_tags":[{"id":27,"name":"laser","slug":"laser"},{"id":39,"name":"gallery-mpcnc","slug":"gallery-mpcnc"},{"id":121,"name":"wled","slug":"wled"}],"topics":[{"fancy_title":"About the Jackpot Board / FluidNC category","id":33983,"title":"About the Jackpot Board / FluidNC category","slug":"about-the-jackpot-board-fluidnc-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2022-08-14T15:18:51.642Z","last_posted_at":"2022-08-14T15:18:51.659Z","bumped":true,"bumped_at":"2023-09-13T22:31:58.232Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Issues with FluidNC, or the Jackpot CNC control Board? \nThis is the right place for you.","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1824,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot 3 No Connection EXTREMELY HOT!","id":54343,"title":"Jackpot 3 No Connection EXTREMELY HOT!","slug":"jackpot-3-no-connection-extremely-hot","posts_count":11,"reply_count":6,"highest_post_number":11,"image_url":null,"created_at":"2026-06-25T08:12:17.975Z","last_posted_at":"2026-09-10T05:46:16.989Z","bumped":true,"bumped_at":"2026-09-10T05:46:16.989Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My Jackpot 3 doesn’t not connect to my computer via USB, no wifi or Bluetooth via ‘32 and it get extremely hot around the center of the board only from USB powered. How can I fix this? Is my board damaged? There are no v…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":174,"like_count":5,"has_summary":false,"last_poster_username":"James_Keillor","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14998,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":15156,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Random boot problems","id":54769,"title":"Random boot problems","slug":"random-boot-problems","posts_count":14,"reply_count":8,"highest_post_number":14,"image_url":null,"created_at":"2026-09-07T15:37:17.519Z","last_posted_at":"2026-09-10T00:36:53.152Z","bumped":true,"bumped_at":"2026-09-10T00:36:53.152Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The machine in question has been up and running for more than a year and the config.yaml hasn’t been changed in 10 months or so. Lately I have been experiencing boot issues where it boots to ALARM mode and complains abou…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":82,"like_count":5,"has_summary":false,"last_poster_username":"Britt","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11656,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2250,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FluidNC FigUI","id":53972,"title":"FluidNC FigUI","slug":"fluidnc-figui","posts_count":25,"reply_count":17,"highest_post_number":25,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/8/e8c16e1647e0b20adffbf6de7898be8bb3dfd506_2_1024x581.jpeg","created_at":"2026-05-04T01:10:07.601Z","last_posted_at":"2026-09-04T15:58:46.753Z","bumped":true,"bumped_at":"2026-09-04T15:58:46.753Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"There’s a new Web UI being talked about on Discord and it has my attention.  While I generally use FluidTouch for anything that’s not uploading files, I still use the WebUI sometimes.  I considered at one point making a …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1090,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/e/8/e8c16e1647e0b20adffbf6de7898be8bb3dfd506.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":581,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/8/e8c16e1647e0b20adffbf6de7898be8bb3dfd506_2_1024x581.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":454,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/8/e8c16e1647e0b20adffbf6de7898be8bb3dfd506_2_800x454.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":227,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/8/e8c16e1647e0b20adffbf6de7898be8bb3dfd506_2_400x227.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":113,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/8/e8c16e1647e0b20adffbf6de7898be8bb3dfd506_2_200x113.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":56,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/8/e8c16e1647e0b20adffbf6de7898be8bb3dfd506_2_100x56.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":28,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/8/e8c16e1647e0b20adffbf6de7898be8bb3dfd506_2_50x28.jpeg"}],"tags":[],"tags_descriptions":{},"views":1055,"like_count":23,"has_summary":false,"last_poster_username":"Tiggr","category_id":43,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":18,"green":23,"blue":40},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11259,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":14952,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14803,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot to FluidDial Pendant - wireless connection via ESP-NOW","id":54066,"title":"Jackpot to FluidDial Pendant - wireless connection via ESP-NOW","slug":"jackpot-to-fluiddial-pendant-wireless-connection-via-esp-now","posts_count":97,"reply_count":79,"highest_post_number":97,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b47330205ef83db6bc84abe00711659c7704e91e_2_1024x576.jpeg","created_at":"2026-05-14T21:43:06.300Z","last_posted_at":"2026-09-04T13:59:41.150Z","bumped":true,"bumped_at":"2026-09-04T13:59:41.150Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi All, \n(UPDATE! There’s now an official implementation, so check that out! FluidDial/docs/ESP-NOW.md at main · figamore/FluidDial · GitHub ) \n(Update: How is this different than the websocket implementation mentioned b…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1280,"height":720,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/4/b47330205ef83db6bc84abe00711659c7704e91e.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":576,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b47330205ef83db6bc84abe00711659c7704e91e_2_1024x576.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":450,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b47330205ef83db6bc84abe00711659c7704e91e_2_800x450.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":225,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b47330205ef83db6bc84abe00711659c7704e91e_2_400x225.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":112,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b47330205ef83db6bc84abe00711659c7704e91e_2_200x112.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":56,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b47330205ef83db6bc84abe00711659c7704e91e_2_100x56.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":28,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b47330205ef83db6bc84abe00711659c7704e91e_2_50x28.jpeg"}],"tags":[],"tags_descriptions":{},"views":932,"like_count":69,"has_summary":true,"last_poster_username":"Britt","category_id":43,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":36,"green":30,"blue":26},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":3337,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":2250,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":15055,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FluidNC 3.9.9 Freezing Issue","id":54735,"title":"FluidNC 3.9.9 Freezing Issue","slug":"fluidnc-3-9-9-freezing-issue","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-09-02T04:05:30.022Z","last_posted_at":"2026-09-02T04:05:30.166Z","bumped":true,"bumped_at":"2026-09-02T04:05:30.166Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I wanted to post a follow-up in case anyone else runs into the same issue. \nI was using a Jackpot3 with FluidNC 3.9.9. \nWhen I left the machine powered on while connected to the Jackpot3, after some time the machine woul…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":53,"like_count":1,"has_summary":false,"last_poster_username":"S_HHH","category_id":43,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":15105,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot3 Motor DriverTMC2226 and Capacitor Getting Very Hot","id":54719,"title":"Jackpot3 Motor DriverTMC2226 and Capacitor Getting Very Hot","slug":"jackpot3-motor-drivertmc2226-and-capacitor-getting-very-hot","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2026-08-31T15:22:19.480Z","last_posted_at":"2026-09-02T03:47:14.636Z","bumped":true,"bumped_at":"2026-09-02T03:47:14.636Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a question about heat around the motor driver area on my Jackpot3. \nWhen I connect a stepper motor, the motor driver IC and the electrolytic capacitor next to that motor port become quite hot. \nThe current motor c…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":75,"like_count":2,"has_summary":false,"last_poster_username":"S_HHH","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":15105,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"My Jackpot3 Doesn’t Work","id":54701,"title":"My Jackpot3 Doesn’t Work","slug":"my-jackpot3-doesn-t-work","posts_count":24,"reply_count":14,"highest_post_number":24,"image_url":null,"created_at":"2026-08-27T18:29:10.814Z","last_posted_at":"2026-08-27T20:20:50.106Z","bumped":true,"bumped_at":"2026-08-27T20:20:50.106Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I recently bought a jackpot3 card and downloaded fluidNC to it. But when i wired the motors none of them moved. It says that it’s on idle mode and when i click +X, -Y etc. nothing happens. But on the console it says the …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":129,"like_count":1,"has_summary":false,"last_poster_username":"vicious1","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":15175,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot V1 - ESP32 poor wifi?","id":54694,"title":"Jackpot V1 - ESP32 poor wifi?","slug":"jackpot-v1-esp32-poor-wifi","posts_count":10,"reply_count":5,"highest_post_number":10,"image_url":null,"created_at":"2026-08-26T19:16:43.302Z","last_posted_at":"2026-08-27T17:07:05.755Z","bumped":true,"bumped_at":"2026-08-27T17:07:05.755Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi I put together a lowrider V4 with this and the wifi connection is very poor even though it is ten feet line of site to the router.  Help ?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":101,"like_count":4,"has_summary":false,"last_poster_username":"vincentw56","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1936,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot v2 5V module","id":54678,"title":"Jackpot v2 5V module","slug":"jackpot-v2-5v-module","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/d/0d6bc412d628210f6048869e2f9eb0c53fbe8513_2_1024x537.jpeg","created_at":"2026-08-22T17:03:06.738Z","last_posted_at":"2026-08-22T17:23:02.001Z","bumped":true,"bumped_at":"2026-08-22T17:23:02.001Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Do you think that Bart’s 5V Output Module would work on the Jackpot V2 to allow control of a laser module? \nHere is the link:","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1200,"height":630,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/0/d/0d6bc412d628210f6048869e2f9eb0c53fbe8513.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":537,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/d/0d6bc412d628210f6048869e2f9eb0c53fbe8513_2_1024x537.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":420,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/d/0d6bc412d628210f6048869e2f9eb0c53fbe8513_2_800x420.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":210,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/d/0d6bc412d628210f6048869e2f9eb0c53fbe8513_2_400x210.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":105,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/d/0d6bc412d628210f6048869e2f9eb0c53fbe8513_2_200x105.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":52,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/d/0d6bc412d628210f6048869e2f9eb0c53fbe8513_2_100x52.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":26,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/d/0d6bc412d628210f6048869e2f9eb0c53fbe8513_2_50x26.jpeg"}],"tags":[],"tags_descriptions":{},"views":67,"like_count":2,"has_summary":false,"last_poster_username":"vicious1","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":56,"green":61,"blue":53},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Any new limitations to the Jackpot v2?","id":54634,"title":"Any new limitations to the Jackpot v2?","slug":"any-new-limitations-to-the-jackpot-v2","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2026-08-14T20:47:35.268Z","last_posted_at":"2026-08-20T04:23:43.365Z","bumped":true,"bumped_at":"2026-08-20T04:23:43.365Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"As I push my LR4 a bit doing things like cutting thick materials,  etc. It’s becoming clear that I’m going to need to swap out my SKR 1.3/Marlin platform and move to the Jackpot/FluidNC platform. \n(One example is to be a…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":127,"like_count":7,"has_summary":false,"last_poster_username":"dwkisker","category_id":43,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2373,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot3 stepper confusion","id":54652,"title":"Jackpot3 stepper confusion","slug":"jackpot3-stepper-confusion","posts_count":23,"reply_count":15,"highest_post_number":23,"image_url":null,"created_at":"2026-08-18T03:25:31.209Z","last_posted_at":"2026-08-19T23:47:37.970Z","bumped":true,"bumped_at":"2026-08-19T23:47:37.970Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So, I’m very confused.  I’m switching from SKR 1.2 on my MPCNC to a Jackpot3 and the stepper motor connections seem completely out of whack.  I carefully labeled the all of them before removing them and have checked each…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":186,"like_count":16,"has_summary":false,"last_poster_username":"Nickbwilson","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":9668,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Assistance needed with using the Hold Monitor extension with FluidNC 4.x and WebUI v3.0.10","id":54647,"title":"Assistance needed with using the Hold Monitor extension with FluidNC 4.x and WebUI v3.0.10","slug":"assistance-needed-with-using-the-hold-monitor-extension-with-fluidnc-4-x-and-webui-v3-0-10","posts_count":9,"reply_count":6,"highest_post_number":9,"image_url":null,"created_at":"2026-08-17T12:27:21.364Z","last_posted_at":"2026-08-17T16:48:06.789Z","bumped":true,"bumped_at":"2026-08-17T16:48:06.789Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I was on FluidNC 3.9.9 for a while using WebUI v3.0.0.5 and the Hold Monitor extension.  Things were working fine for me in that for every M0 command I had in my gcode, it would print out the comment after the M0.  For e…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":85,"like_count":3,"has_summary":false,"last_poster_username":"Mattman","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":9435,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":11259,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"The Pendant discussion","id":50350,"title":"The Pendant discussion","slug":"the-pendant-discussion","posts_count":212,"reply_count":162,"highest_post_number":215,"image_url":null,"created_at":"2025-07-27T16:24:00.313Z","last_posted_at":"2026-08-16T02:25:49.186Z","bumped":true,"bumped_at":"2026-08-16T02:25:49.186Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Let’s talk about pendants with the Jackpot or webui in general. \nI see three main points people are trying to solve. \n-The first is easier jogging, I am not a fan of either webui V2 or V3, or the pendant encoders version…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":2703,"like_count":343,"has_summary":true,"last_poster_username":"Keegan","category_id":43,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9012,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":11772,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10974,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FluidTouch - Wireless FluidNC Pendant","id":52029,"title":"FluidTouch - Wireless FluidNC Pendant","slug":"fluidtouch-wireless-fluidnc-pendant","posts_count":560,"reply_count":383,"highest_post_number":561,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/5/a/5a2d196b7f209a25cd35e5aa1751385560cc325c.png","created_at":"2025-11-17T23:25:23.803Z","last_posted_at":"2026-08-13T21:46:14.984Z","bumped":true,"bumped_at":"2026-08-13T21:46:14.984Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"A little over a month ago, I started some experimentation with an Elecrow 7" display with LVGL and my new friend Claude.  It went way better than expected and this is the result as version 1.0.0. \n\n  \n \n \n \n \n \n \n \n \n \n \n…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":800,"height":480,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/5/a/5a2d196b7f209a25cd35e5aa1751385560cc325c.png"},{"max_width":400,"max_height":400,"width":400,"height":240,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/a/5a2d196b7f209a25cd35e5aa1751385560cc325c_2_400x240.png"},{"max_width":200,"max_height":200,"width":200,"height":120,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/a/5a2d196b7f209a25cd35e5aa1751385560cc325c_2_200x120.png"},{"max_width":100,"max_height":100,"width":100,"height":60,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/a/5a2d196b7f209a25cd35e5aa1751385560cc325c_2_100x60.png"},{"max_width":50,"max_height":50,"width":50,"height":30,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/a/5a2d196b7f209a25cd35e5aa1751385560cc325c_2_50x30.png"}],"tags":[],"tags_descriptions":{},"views":11080,"like_count":773,"has_summary":true,"last_poster_username":"jeyeager","category_id":43,"op_like_count":27,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":2,"green":94,"blue":155},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":11259,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":8548,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13989,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":10185,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":14940,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New Release FluidNC v4.0.4 2026-08-05","id":54612,"title":"New Release FluidNC v4.0.4 2026-08-05","slug":"new-release-fluidnc-v4-0-4-2026-08-05","posts_count":11,"reply_count":7,"highest_post_number":11,"image_url":null,"created_at":"2026-08-12T16:41:23.227Z","last_posted_at":"2026-08-13T18:40:27.755Z","bumped":true,"bumped_at":"2026-08-13T18:40:27.755Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Has anyone attempted to install the latest version? \nIs it safe to start updating JP3? \nRegards","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":190,"like_count":8,"has_summary":false,"last_poster_username":"iq0099","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":15055,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":11259,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":14528,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Saving new z probe speed","id":54599,"title":"Saving new z probe speed","slug":"saving-new-z-probe-speed","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2026-08-08T19:27:59.413Z","last_posted_at":"2026-08-09T08:29:10.526Z","bumped":true,"bumped_at":"2026-08-09T08:29:10.526Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Can a new probe speed be saved so it doesn’t have to be re entered everytime i do a z probe?  Tried the save config button but that doesn’t do it.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":73,"like_count":0,"has_summary":false,"last_poster_username":"iq0099","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11649,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":15055,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Connecting a Servo to the Jackpot 3","id":54553,"title":"Connecting a Servo to the Jackpot 3","slug":"connecting-a-servo-to-the-jackpot-3","posts_count":7,"reply_count":5,"highest_post_number":7,"image_url":null,"created_at":"2026-07-31T13:09:04.610Z","last_posted_at":"2026-07-31T15:38:12.619Z","bumped":true,"bumped_at":"2026-07-31T15:38:12.619Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, I’d like to use an externally powered RC servo for the pen-lift mechanism on my pen plotter. \nFluidNC supports RC servo PWM on GPIO27. Can I connect it as follows? \n\n\nServo signal → GPIO27 5V “+” \n\n\nServo power → ext…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":77,"like_count":3,"has_summary":false,"last_poster_username":"S_HHH","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":15105,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Setting up Lightburn on an MPCNC with a Jackpot 3","id":54531,"title":"Setting up Lightburn on an MPCNC with a Jackpot 3","slug":"setting-up-lightburn-on-an-mpcnc-with-a-jackpot-3","posts_count":23,"reply_count":11,"highest_post_number":23,"image_url":null,"created_at":"2026-07-27T22:01:07.072Z","last_posted_at":"2026-07-29T23:35:58.237Z","bumped":true,"bumped_at":"2026-07-29T23:35:58.237Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, I recently upgraded from ramps to Jackpot3, have been running light burn as I am lasering.  Everything worked with ramps, it sat off for awhile and I wanted to upgrade. I noticed that my Y/B and X/A were not movin…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":195,"like_count":4,"has_summary":false,"last_poster_username":"vicious1","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":15092,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MPCNC Rambo to Jackpot 3 Upgrade (setup)","id":53885,"title":"MPCNC Rambo to Jackpot 3 Upgrade (setup)","slug":"mpcnc-rambo-to-jackpot-3-upgrade-setup","posts_count":27,"reply_count":15,"highest_post_number":27,"image_url":null,"created_at":"2026-04-20T08:34:45.018Z","last_posted_at":"2026-07-27T04:26:20.923Z","bumped":true,"bumped_at":"2026-07-27T04:26:20.923Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"All my upgrade parts have finally arrived and have been installed. \nI have the Jackpot 3 + FluidTouch installed. \nThe Jackpot 3 has turned on without releasing the smoke and all steppers bar the z stepper are locked. \nHo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":387,"like_count":9,"has_summary":false,"last_poster_username":"FremanW","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":6808,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mozaik setup","id":54522,"title":"Mozaik setup","slug":"mozaik-setup","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2026-07-26T08:46:11.181Z","last_posted_at":"2026-07-26T15:09:02.840Z","bumped":true,"bumped_at":"2026-07-26T15:09:02.840Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m trying out mozaik cabinet software. Has anyone used it before and got their Cnc connected and working properly? I’m looking for guidance on how to get mozaik working perfectly with lowrider v4 and fluid nc. \nthanks","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":87,"like_count":2,"has_summary":false,"last_poster_username":"vicious1","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14936,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3142,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Preferences.json help","id":54496,"title":"Preferences.json help","slug":"preferences-json-help","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/2/8/28c0d25c1c95fc8d979a8ef5c43dda12e044f5f0.png","created_at":"2026-07-20T19:16:48.167Z","last_posted_at":"2026-07-20T20:24:21.965Z","bumped":true,"bumped_at":"2026-07-20T20:24:21.965Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m using a JP 1 board, upgraded to WebUI 3.0.0-5.FluidNC and running FluidNC v3.9.9. \nEverytime I boot up the board I get this: \n \nNow, everything else seems to work, but I’m not sure what the issue is with my preferenc…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":181,"height":47,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/2/8/28c0d25c1c95fc8d979a8ef5c43dda12e044f5f0.png"},{"max_width":100,"max_height":100,"width":100,"height":25,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/8/28c0d25c1c95fc8d979a8ef5c43dda12e044f5f0_2_100x25.png"},{"max_width":50,"max_height":50,"width":50,"height":12,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/8/28c0d25c1c95fc8d979a8ef5c43dda12e044f5f0_2_50x12.png"}],"tags":[],"tags_descriptions":{},"views":57,"like_count":0,"has_summary":false,"last_poster_username":"Mattman","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{"red":76,"green":62,"blue":64},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":9435,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot 3 Installation complete!","id":54459,"title":"Jackpot 3 Installation complete!","slug":"jackpot-3-installation-complete","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-07-14T21:18:39.993Z","last_posted_at":"2026-07-14T23:16:53.957Z","bumped":true,"bumped_at":"2026-07-14T23:16:53.957Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I finished updating my LR4 with a new Jackpot 3 and love it with the newly printed case and cover. Nice and tidy. My previous JP 1 is destined to my original Primo and perhaps consider a laser attachment. \nQuestions: \n\nI…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":102,"like_count":7,"has_summary":false,"last_poster_username":"CABix","category_id":43,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":6606,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":11259,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Recent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot 1 - GPIO’s 26 and 27","id":54423,"title":"Jackpot 1 - GPIO's 26 and 27","slug":"jackpot-1-gpios-26-and-27","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":null,"created_at":"2026-07-08T15:50:55.048Z","last_posted_at":"2026-07-08T22:01:29.565Z","bumped":true,"bumped_at":"2026-07-08T22:01:29.565Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I purchased a Two-Channel Control IoT AC Power Relay Module for Arduino Raspberry Pi PLC MCU. \nDual Power Relay \nI can turn GPIO 26 on and off with M64 P0 and M63 P0. \nI cannot do the same for GPIO 27. \nI have read a lot…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":89,"like_count":4,"has_summary":false,"last_poster_username":"spsully2582","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10335,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot 3 Heat sinks?","id":54416,"title":"Jackpot 3 Heat sinks?","slug":"jackpot-3-heat-sinks","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2026-07-06T23:50:36.552Z","last_posted_at":"2026-07-08T04:54:01.885Z","bumped":true,"bumped_at":"2026-07-08T04:54:01.885Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Excited I got my Jackpot 3 from Ryan. \nSilly question it came with the heatsinks, yet in all the pictures on V1 I don’t see them with applied heatsinks?? \nCurious? I assume use?? \nthanks","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":115,"like_count":5,"has_summary":false,"last_poster_username":"CABix","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":6606,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"NymoLabs Wireless Probe with Jackpot","id":53736,"title":"NymoLabs Wireless Probe with Jackpot","slug":"nymolabs-wireless-probe-with-jackpot","posts_count":18,"reply_count":11,"highest_post_number":18,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/d/6/d6afc236d52d9959494f77bdc4159d655d4ce78b.jpeg","created_at":"2026-03-30T22:23:49.101Z","last_posted_at":"2026-07-07T06:47:33.052Z","bumped":true,"bumped_at":"2026-07-07T06:47:33.052Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Has anyone tried using one these wireless Z-Axis probes with a Jackpot? \nIt looks like it would be quite simple to get working with a Jackpot. I should receive one later today and will share how it goes. \nhttps://www.ama…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":684,"height":516,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/d/6/d6afc236d52d9959494f77bdc4159d655d4ce78b.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":301,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6afc236d52d9959494f77bdc4159d655d4ce78b_2_400x301.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6afc236d52d9959494f77bdc4159d655d4ce78b_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6afc236d52d9959494f77bdc4159d655d4ce78b_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6afc236d52d9959494f77bdc4159d655d4ce78b_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":321,"like_count":27,"has_summary":false,"last_poster_username":"Terry_O_Sullivan","category_id":43,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":47,"green":47,"blue":49},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":7877,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13519,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":12677,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Work-in-progress - alternative FluidNC UI","id":54414,"title":"Work-in-progress - alternative FluidNC UI","slug":"work-in-progress-alternative-fluidnc-ui","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6213b180fd20371c44a10abab4512d692cfb157_2_1024x554.png","created_at":"2026-07-06T20:12:18.345Z","last_posted_at":"2026-07-07T01:51:21.846Z","bumped":true,"bumped_at":"2026-07-07T01:51:21.846Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"New here, I’m usually on /r/hobbycnc but I’m a FluidNC-er (and Estlcam-er) so some folks suggested I share this here… \nMade a new machine this year with a FluidNC Corgi board. Previously I had a Duet machine - the FluidN…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1040,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/d/6/d6213b180fd20371c44a10abab4512d692cfb157.png"},{"max_width":1024,"max_height":1024,"width":1024,"height":554,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6213b180fd20371c44a10abab4512d692cfb157_2_1024x554.png"},{"max_width":800,"max_height":800,"width":800,"height":433,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6213b180fd20371c44a10abab4512d692cfb157_2_800x433.png"},{"max_width":400,"max_height":400,"width":400,"height":216,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6213b180fd20371c44a10abab4512d692cfb157_2_400x216.png"},{"max_width":200,"max_height":200,"width":200,"height":108,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6213b180fd20371c44a10abab4512d692cfb157_2_200x108.png"},{"max_width":100,"max_height":100,"width":100,"height":54,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6213b180fd20371c44a10abab4512d692cfb157_2_100x54.png"},{"max_width":50,"max_height":50,"width":50,"height":27,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d6213b180fd20371c44a10abab4512d692cfb157_2_50x27.png"}],"tags":[],"tags_descriptions":{},"views":135,"like_count":11,"has_summary":false,"last_poster_username":"spsully2582","category_id":43,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":37,"green":37,"blue":37},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":15034,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8581,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1108,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Pendant help","id":54393,"title":"Pendant help","slug":"pendant-help","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2026-07-03T02:11:35.372Z","last_posted_at":"2026-07-03T18:55:02.909Z","bumped":true,"bumped_at":"2026-07-03T18:55:02.909Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an LR4 I made the pendant. I can hook it up via the RJ45 connector to my Jackpot V3 board. It powers on and I get the menu but nothing else seems to work. Think I am missing a step somewhere. Any ideas?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":110,"like_count":2,"has_summary":false,"last_poster_username":"lawsjr","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14820,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FigUI Surfacing plugin","id":54350,"title":"FigUI Surfacing plugin","slug":"figui-surfacing-plugin","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/8/98159ba16bf72e929fdc83c53faaafd9fa4a802d.png","created_at":"2026-06-26T05:33:20.830Z","last_posted_at":"2026-06-30T01:07:57.379Z","bumped":true,"bumped_at":"2026-06-30T01:07:57.379Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi all \nI’ve created a Fig UI surfacing plugin: \nzerg32/figui-surfacing \nThat allows you to create surfacing gcode straight from FigUI \nIt also supports surfacing in multiple passed with a finishing pass. I’m quite often…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":897,"height":907,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/8/98159ba16bf72e929fdc83c53faaafd9fa4a802d.png"},{"max_width":800,"max_height":800,"width":791,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/8/98159ba16bf72e929fdc83c53faaafd9fa4a802d_2_791x800.png"},{"max_width":400,"max_height":400,"width":395,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/8/98159ba16bf72e929fdc83c53faaafd9fa4a802d_2_395x400.png"},{"max_width":200,"max_height":200,"width":197,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/8/98159ba16bf72e929fdc83c53faaafd9fa4a802d_2_197x200.png"},{"max_width":100,"max_height":100,"width":98,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/8/98159ba16bf72e929fdc83c53faaafd9fa4a802d_2_98x100.png"},{"max_width":50,"max_height":50,"width":49,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/8/98159ba16bf72e929fdc83c53faaafd9fa4a802d_2_49x50.png"}],"tags":[],"tags_descriptions":{},"views":114,"like_count":5,"has_summary":false,"last_poster_username":"Octimusocti","category_id":43,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":21,"green":26,"blue":44},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2250,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11536,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot + FluidNC 3.9.1 requires RESET before USB connects; random 0xFF console output and occasional mid-job stops","id":54372,"title":"Jackpot + FluidNC 3.9.1 requires RESET before USB connects; random 0xFF console output and occasional mid-job stops","slug":"jackpot-fluidnc-3-9-1-requires-reset-before-usb-connects-random-0xff-console-output-and-occasional-mid-job-stops","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2026-06-29T17:27:06.709Z","last_posted_at":"2026-06-30T00:42:19.286Z","bumped":true,"bumped_at":"2026-06-30T00:42:19.286Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, \nI’ve been chasing what I originally thought were two separate problems, but after several days of systematic troubleshooting, I now suspect they may be related. \nHardware \n\n\nV1 Jackpot controller \n\n\nESP3…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":80,"like_count":5,"has_summary":false,"last_poster_username":"tlumppy","category_id":43,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2201,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]}]}}