{"users":[{"id":1706,"username":"caffgeek","name":"Chad","avatar_template":"/user_avatar/forum.v1e.com/caffgeek/{size}/62412_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":2},{"id":14273,"username":"MisterMakerNL","name":"Marijn","avatar_template":"/user_avatar/forum.v1e.com/mistermakernl/{size}/108934_2.png","trust_level":2},{"id":13201,"username":"Sayer","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/3d9bf3/{size}.png","trust_level":1},{"id":10428,"username":"Frits","name":"","avatar_template":"/user_avatar/forum.v1e.com/frits/{size}/59716_2.png","trust_level":2},{"id":5226,"username":"Tokoloshe","name":"Philipp","avatar_template":"/user_avatar/forum.v1e.com/tokoloshe/{size}/26379_2.png","primary_group_name":"patrons","trust_level":3},{"id":12027,"username":"MohnJadden","name":"","avatar_template":"/user_avatar/forum.v1e.com/mohnjadden/{size}/81032_2.png","trust_level":1},{"id":5816,"username":"dalrun","name":"Dave L","avatar_template":"/user_avatar/forum.v1e.com/dalrun/{size}/99329_2.png","trust_level":2},{"id":609,"username":"kcny","name":"kcny","avatar_template":"/letter_avatar_proxy/v4/letter/k/51bf81/{size}.png","trust_level":2},{"id":14901,"username":"Tony1","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/t/858c86/{size}.png","trust_level":0},{"id":10827,"username":"Bartman","name":"","avatar_template":"/user_avatar/forum.v1e.com/bartman/{size}/63661_2.png","trust_level":3},{"id":9012,"username":"CesarH","name":"cesar","avatar_template":"/user_avatar/forum.v1e.com/cesarh/{size}/60720_2.png","trust_level":3},{"id":14457,"username":"rsabboud","name":"","avatar_template":"/user_avatar/forum.v1e.com/rsabboud/{size}/111151_2.png","trust_level":1},{"id":8782,"username":"orob","name":"","avatar_template":"/user_avatar/forum.v1e.com/orob/{size}/62644_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":9732,"username":"which_carpenter","name":"David C","avatar_template":"/user_avatar/forum.v1e.com/which_carpenter/{size}/88699_2.png","trust_level":3},{"id":1108,"username":"timonjkl","name":"Tim W","avatar_template":"/user_avatar/forum.v1e.com/timonjkl/{size}/111103_2.png","trust_level":3},{"id":10759,"username":"SteveB","name":"Steve","avatar_template":"/letter_avatar_proxy/v4/letter/s/ea666f/{size}.png","trust_level":1},{"id":11259,"username":"jeyeager","name":"Jason Yeager","avatar_template":"/user_avatar/forum.v1e.com/jeyeager/{size}/71643_2.png","trust_level":3},{"id":3692,"username":"ttraband","name":"Tom Traband","avatar_template":"/user_avatar/forum.v1e.com/ttraband/{size}/16479_2.png","trust_level":3},{"id":2,"username":"vicious1","name":"Ryan","avatar_template":"/user_avatar/forum.v1e.com/vicious1/{size}/104426_2.png","admin":true,"moderator":true,"trust_level":4},{"id":244,"username":"jono035","name":"Jono","avatar_template":"/user_avatar/forum.v1e.com/jono035/{size}/28_2.png","trust_level":3},{"id":7877,"username":"TMathews","name":"Todd Mathews","avatar_template":"/letter_avatar_proxy/v4/letter/t/c67d28/{size}.png","trust_level":2},{"id":14179,"username":"lowriderbuildth","name":"LowriderBuildTH","avatar_template":"/letter_avatar_proxy/v4/letter/l/b9bd4f/{size}.png","trust_level":2},{"id":13441,"username":"Wittiko","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/w/eb9ed0/{size}.png","trust_level":2},{"id":14684,"username":"martinrogan","name":"Marty","avatar_template":"/letter_avatar_proxy/v4/letter/m/f17d59/{size}.png","trust_level":2},{"id":12999,"username":"B-Stone","name":"Brandon","avatar_template":"/letter_avatar_proxy/v4/letter/b/f1d935/{size}.png","trust_level":1},{"id":4103,"username":"Jonathjon","name":"Jonathan Jones","avatar_template":"/user_avatar/forum.v1e.com/jonathjon/{size}/70532_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":48,"username":"christian-knuell","name":"Christian Knuell","avatar_template":"/user_avatar/forum.v1e.com/christian-knuell/{size}/23821_2.png","trust_level":2},{"id":14681,"username":"GGaaaaaaaaaaaaa","name":"g","avatar_template":"/letter_avatar_proxy/v4/letter/g/d26b3c/{size}.png","trust_level":0},{"id":14580,"username":"Cowan","name":"","avatar_template":"/user_avatar/forum.v1e.com/cowan/{size}/112733_2.png","trust_level":1},{"id":13219,"username":"FreneticScribbler","name":"AJ","avatar_template":"/user_avatar/forum.v1e.com/freneticscribbler/{size}/98446_2.png","trust_level":2},{"id":13450,"username":"caboverde","name":"","avatar_template":"/user_avatar/forum.v1e.com/caboverde/{size}/100665_2.png","trust_level":1},{"id":2538,"username":"kockie-nl","name":"Kockie_nl","avatar_template":"/user_avatar/forum.v1e.com/kockie-nl/{size}/15942_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":7147,"username":"DougJoseph","name":"Doug Joseph (design8studio)","avatar_template":"/user_avatar/forum.v1e.com/dougjoseph/{size}/34670_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":6154,"username":"Sonmer","name":"Bastian","avatar_template":"/user_avatar/forum.v1e.com/sonmer/{size}/99254_2.png","trust_level":2},{"id":2373,"username":"dwkisker","name":"Dave K","avatar_template":"/user_avatar/forum.v1e.com/dwkisker/{size}/92548_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":9435,"username":"Mattman","name":"Matt K","avatar_template":"/letter_avatar_proxy/v4/letter/m/e47774/{size}.png","trust_level":2},{"id":14642,"username":"kasspur","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/k/51bf81/{size}.png","trust_level":1},{"id":7229,"username":"Bigburlybug","name":"","avatar_template":"/user_avatar/forum.v1e.com/bigburlybug/{size}/69412_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":6509,"username":"brenavich980","name":"Brent Vecchi","avatar_template":"/user_avatar/forum.v1e.com/brenavich980/{size}/62774_2.png","trust_level":2},{"id":972,"username":"niget2002","name":"David Walling","avatar_template":"/user_avatar/forum.v1e.com/niget2002/{size}/29757_2.png","trust_level":3},{"id":14648,"username":"ZackRich12","name":"","avatar_template":"/user_avatar/forum.v1e.com/zackrich12/{size}/113684_2.png","trust_level":1},{"id":9253,"username":"MakerJim","name":"","avatar_template":"/user_avatar/forum.v1e.com/makerjim/{size}/87766_2.png","trust_level":3},{"id":511,"username":"markal","name":"Mark","avatar_template":"/letter_avatar_proxy/v4/letter/m/49beb7/{size}.png","trust_level":2},{"id":11751,"username":"elyama","name":"Mark","avatar_template":"/user_avatar/forum.v1e.com/elyama/{size}/78267_2.png","trust_level":1},{"id":7286,"username":"Britt","name":"Britt Percival","avatar_template":"/user_avatar/forum.v1e.com/britt/{size}/62440_2.png","trust_level":3},{"id":5351,"username":"Gianpaolo","name":"PAOLO V.","avatar_template":"/user_avatar/forum.v1e.com/gianpaolo/{size}/65082_2.png","trust_level":2},{"id":14251,"username":"DomDom","name":"Dominik","avatar_template":"/user_avatar/forum.v1e.com/domdom/{size}/108653_2.png","trust_level":2},{"id":10851,"username":"Michael_Melancon","name":"Mike M","avatar_template":"/user_avatar/forum.v1e.com/michael_melancon/{size}/63767_2.png","trust_level":3}],"primary_groups":[{"id":41,"name":"patrons"}],"flair_groups":[{"id":41,"name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/software/estlcam/36?page=1","per_page":30,"top_tags":[],"topics":[{"fancy_title":"Help with how to program/carve this?","id":54277,"title":"Help with how to program/carve this?","slug":"help-with-how-to-program-carve-this","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/1/11e3016b91991cbc12d509b0fb22fcb0fe14cce1.png","created_at":"2026-06-15T14:55:23.385Z","last_posted_at":"2026-06-15T15:04:02.859Z","bumped":true,"bumped_at":"2026-06-15T15:04:02.859Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So, normally I have a good quality graphic to work from… but not in this case, I’m attempting to make a gift, but I can’t get a better version of the logo, than this (It’s for a prize at the event, bu…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":328,"height":328,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/1/11e3016b91991cbc12d509b0fb22fcb0fe14cce1.png"},{"max_width":200,"max_height":200,"width":200,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/1/11e3016b91991cbc12d509b0fb22fcb0fe14cce1_2_200x200.png"},{"max_width":100,"max_height":100,"width":100,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/1/11e3016b91991cbc12d509b0fb22fcb0fe14cce1_2_100x100.png"},{"max_width":50,"max_height":50,"width":50,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/1/11e3016b91991cbc12d509b0fb22fcb0fe14cce1_2_50x50.png"}],"tags":[],"tags_descriptions":{},"views":32,"like_count":0,"has_summary":false,"last_poster_username":"MisterMakerNL","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":53,"green":37,"blue":28},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Do the letters as pockets/carves and the for the rest engrave the lines. \nOr spend hours on fixing the image for carving. \nI’m not an expert in this tho.","last_post_id":432866,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1706,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":14273,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Motors only move in one direction","id":54250,"title":"Motors only move in one direction","slug":"motors-only-move-in-one-direction","posts_count":12,"reply_count":6,"highest_post_number":12,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/9/495cc7db860684ce2cd25be0adf9ae4016a44aaa_2_1024x768.jpeg","created_at":"2026-06-09T10:00:51.678Z","last_posted_at":"2026-06-10T11:19:46.181Z","bumped":true,"bumped_at":"2026-06-10T11:19:46.181Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Troubleshooting a control system with an Open CNC Shield 2 Mini, Klemmenadapter XL and CL57T drivers. \nThe DIR signal can go to high and low states as expected (0 or 5 volts) when prompted to in Eastl…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/9/495cc7db860684ce2cd25be0adf9ae4016a44aaa.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/9/495cc7db860684ce2cd25be0adf9ae4016a44aaa_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/9/495cc7db860684ce2cd25be0adf9ae4016a44aaa_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/9/495cc7db860684ce2cd25be0adf9ae4016a44aaa_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/9/495cc7db860684ce2cd25be0adf9ae4016a44aaa_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/9/495cc7db860684ce2cd25be0adf9ae4016a44aaa_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/9/495cc7db860684ce2cd25be0adf9ae4016a44aaa_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":93,"like_count":0,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Can’t take better pics, sorry. I have the ground done differently, but besides that I don’t see any differences: \n  \n \n \n","last_post_id":432596,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":13201,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10428,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Setting laser power in Estlcam for pen plotting","id":54231,"title":"Setting laser power in Estlcam for pen plotting","slug":"setting-laser-power-in-estlcam-for-pen-plotting","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2026-06-05T14:18:24.803Z","last_posted_at":"2026-06-07T20:46:52.751Z","bumped":true,"bumped_at":"2026-06-07T20:46:52.751Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an Atomstack laser engraver that I converted for pen plotter use.  It uses the Harry Plotter setup - an Arduino Nano translates laser power over 5% to pen down, below that to pen up. \nI’d like …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":90,"like_count":0,"has_summary":false,"last_poster_username":"MisterMakerNL","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Since you get a pen on your laser I am assuming it is a diode laser. And for diode laser often your machine can go way faster then necessary, and thus setting your pwm is pretty useless, you should se…","last_post_id":432474,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14273,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Spoilboard surface settings","id":23174,"title":"Spoilboard surface settings","slug":"spoilboard-surface-settings","posts_count":13,"reply_count":7,"highest_post_number":13,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/e/4e4bdf89e35389664ea26aaa7b033cc44036e3d5_2_768x1024.jpeg","created_at":"2020-12-12T23:26:06.412Z","last_posted_at":"2026-05-25T16:00:07.644Z","bumped":true,"bumped_at":"2026-05-25T16:00:07.644Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi guys, trying to wrap my head around the whole feeds/speeds/stepover tool settings. \nI’m trying to surface my spoilboard (3/4\" MDF) with this bit: \n\n\nYou can see that when I separately run a rectang…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":2976,"height":3968,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/e/4e4bdf89e35389664ea26aaa7b033cc44036e3d5.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/e/4e4bdf89e35389664ea26aaa7b033cc44036e3d5_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/e/4e4bdf89e35389664ea26aaa7b033cc44036e3d5_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/e/4e4bdf89e35389664ea26aaa7b033cc44036e3d5_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/e/4e4bdf89e35389664ea26aaa7b033cc44036e3d5_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/e/4e4bdf89e35389664ea26aaa7b033cc44036e3d5_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/e/4e4bdf89e35389664ea26aaa7b033cc44036e3d5_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":2157,"like_count":10,"has_summary":false,"last_poster_username":"CesarH","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":175,"green":161,"blue":150},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I like to use y- to y+ directions. Its esaier to remove and small bump +you help the small x axis motor","last_post_id":431560,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":609,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14901,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10827,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9012,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Help with Estlcam tool path","id":54010,"title":"Help with Estlcam tool path","slug":"help-with-estlcam-tool-path","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba0d1959ead21f5a4f233d44768ade4acd692768_2_1024x768.jpeg","created_at":"2026-05-07T21:36:57.087Z","last_posted_at":"2026-05-08T20:48:11.661Z","bumped":true,"bumped_at":"2026-05-08T20:48:11.661Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, I’m setting up tool paths in Estlcam to use Hafele Rafix 20 connectors. Some of the machining that’s required is milling a 20mm diameter blind hole partway through the material (I’m using 18mm …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/a/ba0d1959ead21f5a4f233d44768ade4acd692768.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba0d1959ead21f5a4f233d44768ade4acd692768_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba0d1959ead21f5a4f233d44768ade4acd692768_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba0d1959ead21f5a4f233d44768ade4acd692768_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba0d1959ead21f5a4f233d44768ade4acd692768_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba0d1959ead21f5a4f233d44768ade4acd692768_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba0d1959ead21f5a4f233d44768ade4acd692768_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":97,"like_count":8,"has_summary":false,"last_poster_username":"rsabboud","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"You guys are amazing. Many thanks for spending the time to provide such thorough feedback. I’m at work still today and out of town this weekend but I’m confident I’ll be able to get it going with this…","last_post_id":430311,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14457,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Why can&rsquo;t I get circular tool paths for spherical dish?","id":53845,"title":"Why can't I get circular tool paths for spherical dish?","slug":"why-cant-i-get-circular-tool-paths-for-spherical-dish","posts_count":8,"reply_count":3,"highest_post_number":8,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/b/8be897f87e057d67ccaecd02d8831b2b03a76916_2_1024x1024.jpeg","created_at":"2026-04-14T04:20:13.702Z","last_posted_at":"2026-05-04T15:59:23.457Z","bumped":true,"bumped_at":"2026-05-04T15:59:23.457Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m making radius sanding dishes for acoustic guitar building. Basically I need to carve a section of a 25’/8 meter sphere into some mdf like this: \n  \nI’ve already carved one using the linear cutting…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1920,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/8/b/8be897f87e057d67ccaecd02d8831b2b03a76916.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/b/8be897f87e057d67ccaecd02d8831b2b03a76916_2_1024x1024.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/b/8be897f87e057d67ccaecd02d8831b2b03a76916_2_800x800.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/b/8be897f87e057d67ccaecd02d8831b2b03a76916_2_400x400.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/b/8be897f87e057d67ccaecd02d8831b2b03a76916_2_200x200.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/b/8be897f87e057d67ccaecd02d8831b2b03a76916_2_100x100.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/b/8be897f87e057d67ccaecd02d8831b2b03a76916_2_50x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":179,"like_count":13,"has_summary":false,"last_poster_username":"which_carpenter","category_id":36,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Forgot to update. This worked perfectly for what I was trying to do. Thanks!","last_post_id":429959,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":9732,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1108,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Estlcam letter carving wierdness","id":53945,"title":"Estlcam letter carving wierdness","slug":"estlcam-letter-carving-wierdness","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/7/57d76f41b663e6afeb58d333c3dee36c339fd68e_2_1024x557.png","created_at":"2026-04-30T22:08:20.087Z","last_posted_at":"2026-05-01T19:56:15.770Z","bumped":true,"bumped_at":"2026-05-01T19:56:15.770Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve done two different carving projects involving text and both have had an issue I can’t figure out. \nFor some reason, some letters give me a little something extra… a deep circular carve off the ap…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1951,"height":1063,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/5/7/57d76f41b663e6afeb58d333c3dee36c339fd68e.png"},{"max_width":1024,"max_height":1024,"width":1024,"height":557,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/7/57d76f41b663e6afeb58d333c3dee36c339fd68e_2_1024x557.png"},{"max_width":800,"max_height":800,"width":800,"height":435,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/7/57d76f41b663e6afeb58d333c3dee36c339fd68e_2_800x435.png"},{"max_width":400,"max_height":400,"width":400,"height":217,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/7/57d76f41b663e6afeb58d333c3dee36c339fd68e_2_400x217.png"},{"max_width":200,"max_height":200,"width":200,"height":108,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/7/57d76f41b663e6afeb58d333c3dee36c339fd68e_2_200x108.png"},{"max_width":100,"max_height":100,"width":100,"height":54,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/7/57d76f41b663e6afeb58d333c3dee36c339fd68e_2_100x54.png"},{"max_width":50,"max_height":50,"width":50,"height":27,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/5/7/57d76f41b663e6afeb58d333c3dee36c339fd68e_2_50x27.png"}],"tags":[],"tags_descriptions":{},"views":93,"like_count":6,"has_summary":false,"last_poster_username":"SteveB","category_id":36,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":2,"green":38,"blue":185},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I saw the fellow who passed the svg file on to me this morning and showed him the issue. I’m pretty sure he will in turn pass it on to his son-in-law, who drew the graphic.","last_post_id":429783,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":10759,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Estlcam G-code Viewer VS NCViewer","id":53957,"title":"Estlcam G-code Viewer VS NCViewer","slug":"estlcam-g-code-viewer-vs-ncviewer","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/2/e/2e31924e0d67a7c5135df91f2d5b84f41dd24391.png","created_at":"2026-05-01T17:51:00.534Z","last_posted_at":"2026-05-01T17:51:00.635Z","bumped":true,"bumped_at":"2026-05-01T17:51:00.635Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The two latest topics have me wondering if the Estlcam G-code viewer is an easy option for folks using non Estlcam controllers. With Estlcam the G-code can be searched with a command line go(to)/v12(1…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":880,"height":609,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/2/e/2e31924e0d67a7c5135df91f2d5b84f41dd24391.png"},{"max_width":800,"max_height":800,"width":800,"height":553,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e31924e0d67a7c5135df91f2d5b84f41dd24391_2_800x553.png"},{"max_width":400,"max_height":400,"width":400,"height":276,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e31924e0d67a7c5135df91f2d5b84f41dd24391_2_400x276.png"},{"max_width":200,"max_height":200,"width":200,"height":138,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e31924e0d67a7c5135df91f2d5b84f41dd24391_2_200x138.png"},{"max_width":100,"max_height":100,"width":100,"height":69,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e31924e0d67a7c5135df91f2d5b84f41dd24391_2_100x69.png"},{"max_width":50,"max_height":50,"width":50,"height":34,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e31924e0d67a7c5135df91f2d5b84f41dd24391_2_50x34.png"}],"tags":[],"tags_descriptions":{},"views":47,"like_count":2,"has_summary":false,"last_poster_username":"dalrun","category_id":36,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":92,"green":148,"blue":215},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"The two latest topics have me wondering if the Estlcam G-code viewer is an easy option for folks using non Estlcam controllers. With Estlcam the G-code can be searched with a command line go(to)/v12(11) entry or by Shift&hellip;","last_post_id":429762,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Estlcam has some occasional mis-moves - is it my source image, my MPCNC, or engraving settings?","id":53689,"title":"Estlcam has some occasional mis-moves - is it my source image, my MPCNC, or engraving settings?","slug":"estlcam-has-some-occasional-mis-moves-is-it-my-source-image-my-mpcnc-or-engraving-settings","posts_count":51,"reply_count":30,"highest_post_number":51,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba521cd889f586d6a52e3d83e444c9bd9f2a8b6b_2_1024x546.svg","created_at":"2026-03-26T00:16:46.766Z","last_posted_at":"2026-04-09T19:39:15.560Z","bumped":true,"bumped_at":"2026-04-09T19:39:15.560Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve got a gel pen in my MPCNC and am using it as a plotter.  I’ve put together an SVG of blueprints to plot out, but I keep on having odd errors when it starts a shape. \nThe SVG itself is below: \n  \nW…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1440,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/a/ba521cd889f586d6a52e3d83e444c9bd9f2a8b6b.svg"},{"max_width":1024,"max_height":1024,"width":1024,"height":546,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba521cd889f586d6a52e3d83e444c9bd9f2a8b6b_2_1024x546.svg"},{"max_width":800,"max_height":800,"width":800,"height":426,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba521cd889f586d6a52e3d83e444c9bd9f2a8b6b_2_800x426.svg"},{"max_width":400,"max_height":400,"width":400,"height":213,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba521cd889f586d6a52e3d83e444c9bd9f2a8b6b_2_400x213.svg"},{"max_width":200,"max_height":200,"width":200,"height":106,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba521cd889f586d6a52e3d83e444c9bd9f2a8b6b_2_200x106.svg"},{"max_width":100,"max_height":100,"width":100,"height":53,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba521cd889f586d6a52e3d83e444c9bd9f2a8b6b_2_100x53.svg"},{"max_width":50,"max_height":50,"width":50,"height":26,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba521cd889f586d6a52e3d83e444c9bd9f2a8b6b_2_50x26.svg"}],"tags":[],"tags_descriptions":{},"views":354,"like_count":16,"has_summary":true,"last_poster_username":"MohnJadden","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thank you all for the feedback and suggestions thus far - I have taken them all into action with a lot of trial and error.  I got as far as hot-gluing a pen to the V1E designed pen holder and running …","last_post_id":427738,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Home assistant intigration?","id":53724,"title":"Home assistant intigration?","slug":"home-assistant-intigration","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-03-30T11:23:55.787Z","last_posted_at":"2026-04-01T11:27:46.572Z","bumped":true,"bumped_at":"2026-04-01T11:27:46.572Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So in the topic on stuff I don’t need, but kinda want. (because it is a flex and it’s cool) <img src=\"https://forum.v1e.com/images/emoji/google/smiling_face_with_sunglasses.png?v=15\" title=\":smiling_face_with_sunglasses:\" class=\"emoji\" alt=\":smiling_face_with_sunglasses:\" loading=\"lazy\" width=\"20\" height=\"20\"> \nI have my vacuum on a smart switch, instead of a relay. \nI know ESTLcam has buttons I can set too outputs …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":123,"like_count":1,"has_summary":false,"last_poster_username":"MisterMakerNL","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I like you style @TMathews lets do blast gates, but I have to put up my ducting for a year now. <img src=\"https://forum.v1e.com/images/emoji/google/slight_smile.png?v=15\" title=\":slight_smile:\" class=\"emoji\" alt=\":slight_smile:\" loading=\"lazy\" width=\"20\" height=\"20\"> \nI do think the ESTLcam direct integration is way nicer! \nBut I might just do the plug due to lack of a…","last_post_id":426986,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14273,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":244,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7877,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Setting up finishing passes","id":53554,"title":"Setting up finishing passes","slug":"setting-up-finishing-passes","posts_count":20,"reply_count":15,"highest_post_number":20,"image_url":null,"created_at":"2026-03-12T17:00:35.209Z","last_posted_at":"2026-03-31T09:03:26.351Z","bumped":true,"bumped_at":"2026-03-31T09:03:26.351Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m a little confused how to set up a full depth finishing pass without needing to ‘change’ tool. Is it possible? \nCurrently the only way I can manage a full depth finishing pass is by making a new to…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":166,"like_count":26,"has_summary":false,"last_poster_username":"martinrogan","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"understood! thanks a lot for the concise explanation","last_post_id":426891,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14179,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13441,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14684,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Moving all layers in ETSLCAM at once","id":53588,"title":"Moving all layers in ETSLCAM at once","slug":"moving-all-layers-in-etslcam-at-once","posts_count":10,"reply_count":6,"highest_post_number":10,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/1/71c4fdcff9d951b31689499603f5bb2031ff6076_2_1024x556.png","created_at":"2026-03-14T07:00:44.447Z","last_posted_at":"2026-03-16T00:45:49.093Z","bumped":true,"bumped_at":"2026-03-16T00:45:49.093Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Im haveing trouble with ETSLCAM. I changed the size of my lwr v4 and need to rotate the drawing and the tool paths to fit my new work space. I need to rotate it 90 deg. but i cant seam to move the dra…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1902,"height":1034,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/7/1/71c4fdcff9d951b31689499603f5bb2031ff6076.png"},{"max_width":1024,"max_height":1024,"width":1024,"height":556,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/1/71c4fdcff9d951b31689499603f5bb2031ff6076_2_1024x556.png"},{"max_width":800,"max_height":800,"width":800,"height":434,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/1/71c4fdcff9d951b31689499603f5bb2031ff6076_2_800x434.png"},{"max_width":400,"max_height":400,"width":400,"height":217,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/1/71c4fdcff9d951b31689499603f5bb2031ff6076_2_400x217.png"},{"max_width":200,"max_height":200,"width":200,"height":108,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/1/71c4fdcff9d951b31689499603f5bb2031ff6076_2_200x108.png"},{"max_width":100,"max_height":100,"width":100,"height":54,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/1/71c4fdcff9d951b31689499603f5bb2031ff6076_2_100x54.png"},{"max_width":50,"max_height":50,"width":50,"height":27,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/1/71c4fdcff9d951b31689499603f5bb2031ff6076_2_50x27.png"}],"tags":[],"tags_descriptions":{},"views":116,"like_count":7,"has_summary":false,"last_poster_username":"B-Stone","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":46,"green":43,"blue":47},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"i do click that link and it works but after about 5 to 10 min it gives me red box. then i get disconected and have to connect back to the machines wifi. not sure why it keeps disconecting me.","last_post_id":425508,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":12999,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Countersunk drilling","id":53543,"title":"Countersunk drilling","slug":"countersunk-drilling","posts_count":13,"reply_count":6,"highest_post_number":13,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/e/9ecb8fc379e54adf90c2dbcd53d112ef7c15d7c8.png","created_at":"2026-03-10T20:22:05.058Z","last_posted_at":"2026-03-12T18:58:18.629Z","bumped":true,"bumped_at":"2026-03-12T18:58:18.629Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am making some things where I am using countersunk holes and I currently do this by hand. \nI was thinking about doing it on the machine, but that would be involve a tool-change. Also I only have met…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":907,"height":719,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/e/9ecb8fc379e54adf90c2dbcd53d112ef7c15d7c8.png"},{"max_width":800,"max_height":800,"width":800,"height":634,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/e/9ecb8fc379e54adf90c2dbcd53d112ef7c15d7c8_2_800x634.png"},{"max_width":400,"max_height":400,"width":400,"height":317,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/e/9ecb8fc379e54adf90c2dbcd53d112ef7c15d7c8_2_400x317.png"},{"max_width":200,"max_height":200,"width":200,"height":158,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/e/9ecb8fc379e54adf90c2dbcd53d112ef7c15d7c8_2_200x158.png"},{"max_width":100,"max_height":100,"width":100,"height":79,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/e/9ecb8fc379e54adf90c2dbcd53d112ef7c15d7c8_2_100x79.png"},{"max_width":50,"max_height":50,"width":50,"height":39,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/e/9ecb8fc379e54adf90c2dbcd53d112ef7c15d7c8_2_50x39.png"}],"tags":[],"tags_descriptions":{},"views":159,"like_count":9,"has_summary":false,"last_poster_username":"MisterMakerNL","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{"red":7,"green":7,"blue":8},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Basically if I didn’t overthink this waaaay too much it would have worked just fine. <img src=\"https://forum.v1e.com/images/emoji/google/laughing.png?v=15\" title=\":laughing:\" class=\"emoji\" alt=\":laughing:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":425173,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14273,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":48,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10827,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gcode rendering and execution problems","id":53497,"title":"Gcode rendering and execution problems","slug":"gcode-rendering-and-execution-problems","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/a/2acbe40da1b908b26fb20b8b889ccfe3635adc84_2_1024x524.jpeg","created_at":"2026-03-07T00:12:21.393Z","last_posted_at":"2026-03-08T16:02:17.236Z","bumped":true,"bumped_at":"2026-03-08T16:02:17.236Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Flow: artwork (svg): blender (3d model stl): estlcam (gcode): universal Gcode Sender : 3020 desktop mill \nproblem 1) Top surfaces of letters are not flat in gcode output \nproblem 2) areas not hogged o…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":984,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/2/a/2acbe40da1b908b26fb20b8b889ccfe3635adc84.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":524,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/a/2acbe40da1b908b26fb20b8b889ccfe3635adc84_2_1024x524.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":410,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/a/2acbe40da1b908b26fb20b8b889ccfe3635adc84_2_800x410.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":205,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/a/2acbe40da1b908b26fb20b8b889ccfe3635adc84_2_400x205.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":102,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/a/2acbe40da1b908b26fb20b8b889ccfe3635adc84_2_200x102.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":51,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/a/2acbe40da1b908b26fb20b8b889ccfe3635adc84_2_100x51.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":25,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/a/2acbe40da1b908b26fb20b8b889ccfe3635adc84_2_50x25.jpeg"}],"tags":[],"tags_descriptions":{},"views":85,"like_count":3,"has_summary":false,"last_poster_username":"dalrun","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":47,"green":47,"blue":51},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"If the model is flat, the G-code output will be flat. I think the irregular spacing/shapes of the waterline paths is making them look topographical in places that they aren’t. Switching to linear pa…","last_post_id":424675,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14681,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Crown from EstlCAM error on Fluid NC","id":53489,"title":"Crown from EstlCAM error on Fluid NC","slug":"crown-from-estlcam-error-on-fluid-nc","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d696c630fcbd1dc97259e54989d78714472a9f73_2_768x1024.jpeg","created_at":"2026-03-06T18:45:08.546Z","last_posted_at":"2026-03-07T17:15:06.797Z","bumped":true,"bumped_at":"2026-03-07T17:15:06.797Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone. I just finished building and dialing in my LowRider V4.  I am trying to run the crown file i exported from EstlCAM and put in the Jackpot 3 board with the micro SD card.  Everytime i hit…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2560,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/d/6/d696c630fcbd1dc97259e54989d78714472a9f73.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d696c630fcbd1dc97259e54989d78714472a9f73_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d696c630fcbd1dc97259e54989d78714472a9f73_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d696c630fcbd1dc97259e54989d78714472a9f73_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d696c630fcbd1dc97259e54989d78714472a9f73_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d696c630fcbd1dc97259e54989d78714472a9f73_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/6/d696c630fcbd1dc97259e54989d78714472a9f73_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":80,"like_count":3,"has_summary":false,"last_poster_username":"FreneticScribbler","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Can you check what encoding the gcode was saved in? On one of my laptops Estlcam saves UTF-8 BOM not plain UTF-8 for some reason, which causes that error","last_post_id":424553,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14580,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10827,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13219,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Letters en figuren frezen in MDF","id":53328,"title":"Letters en figuren frezen in MDF","slug":"letters-en-figuren-frezen-in-mdf","posts_count":18,"reply_count":8,"highest_post_number":18,"image_url":null,"created_at":"2026-02-18T19:27:31.723Z","last_posted_at":"2026-03-04T10:25:45.674Z","bumped":true,"bumped_at":"2026-03-04T10:25:45.674Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Ik heb een werstuk van 29 x 37 cm en wil de letters en figuur geheel uit frezen op 5 mm diepte. Dus de buitenkant van de contouren. \nDit wil ik met 2 verschillende frezen doen, een dikke en een dunne …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":236,"like_count":5,"has_summary":false,"last_poster_username":"MisterMakerNL","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Dutch ESTLcam fanbase ftw!","last_post_id":424094,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":13450,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2538,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":14273,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Flip X-Y in ESTLcam V12","id":52050,"title":"Flip X-Y in ESTLcam V12","slug":"flip-x-y-in-estlcam-v12","posts_count":23,"reply_count":14,"highest_post_number":23,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b68d2e260893a6f91440350142cc06670f9a9669_2_770x1024.jpeg","created_at":"2025-11-19T11:59:45.024Z","last_posted_at":"2026-03-03T21:33:23.625Z","bumped":true,"bumped_at":"2026-03-03T21:33:23.625Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The issue I’m facing is that when I move the machine to the left, the toolhead moves down on the screen instead of left. If I invert the axis, it moves up. Essentially, it’s rotated by 90 degrees. \nBe…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1440,"height":1913,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/6/b68d2e260893a6f91440350142cc06670f9a9669.jpeg"},{"max_width":1024,"max_height":1024,"width":770,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b68d2e260893a6f91440350142cc06670f9a9669_2_770x1024.jpeg"},{"max_width":800,"max_height":800,"width":602,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b68d2e260893a6f91440350142cc06670f9a9669_2_602x800.jpeg"},{"max_width":400,"max_height":400,"width":301,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b68d2e260893a6f91440350142cc06670f9a9669_2_301x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b68d2e260893a6f91440350142cc06670f9a9669_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b68d2e260893a6f91440350142cc06670f9a9669_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b68d2e260893a6f91440350142cc06670f9a9669_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":208,"like_count":15,"has_summary":false,"last_poster_username":"MisterMakerNL","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"So I was checking for updates and such, and was really happy to see @christian-knuell added this feature to v13. So that is awesome! Thanks very much!!! \nAs a small business owner I am not used to bei…","last_post_id":423455,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":14273,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":48,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7147,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6154,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Switching EstlCAM between Marlin and Jackpot/GRBL","id":53346,"title":"Switching EstlCAM between Marlin and Jackpot/GRBL","slug":"switching-estlcam-between-marlin-and-jackpot-grbl","posts_count":8,"reply_count":3,"highest_post_number":8,"image_url":null,"created_at":"2026-02-20T13:50:21.891Z","last_posted_at":"2026-03-01T20:04:34.895Z","bumped":true,"bumped_at":"2026-03-01T20:04:34.895Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"As some of you are probably aware, I mostly take an “if it ain’t broke, don’t “fix\" it” approach to my MPCNC machines.  I’ve been using the SKR board with Marlin for several years (Burley, LR2, LR3, L…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":118,"like_count":15,"has_summary":false,"last_poster_username":"dalrun","category_id":36,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"My preferred method would be ‘Save settings’ as marlin.pp and jackpot.pp and load the appropriate one via ‘Open settings’. I’ve got multiple .pp files and each has a Texts : Program start comment, e.…","last_post_id":418029,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2373,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":48,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Which type of tool profile to use to add a roundover point bit in ESTLCAM 12.x?","id":53393,"title":"Which type of tool profile to use to add a roundover point bit in ESTLCAM 12.x?","slug":"which-type-of-tool-profile-to-use-to-add-a-roundover-point-bit-in-estlcam-12-x","posts_count":7,"reply_count":3,"highest_post_number":7,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/a/ba2e88cfb379c3e8c15c28d448d9c426ede2b459.jpeg","created_at":"2026-02-25T20:31:47.513Z","last_posted_at":"2026-02-27T17:06:26.558Z","bumped":true,"bumped_at":"2026-02-27T17:06:26.558Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a new roundover point bit like this one: \n  \nI’m not sure which profile I need to define this bit within ESTLCAM 12.x: \n  \nDo I use a ‘profiling tool’ profile to define it? \nOr do I use the ‘to…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":452,"height":363,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/a/ba2e88cfb379c3e8c15c28d448d9c426ede2b459.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":321,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba2e88cfb379c3e8c15c28d448d9c426ede2b459_2_400x321.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":160,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba2e88cfb379c3e8c15c28d448d9c426ede2b459_2_200x160.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":80,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba2e88cfb379c3e8c15c28d448d9c426ede2b459_2_100x80.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":40,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/a/ba2e88cfb379c3e8c15c28d448d9c426ede2b459_2_50x40.jpeg"}],"tags":[],"tags_descriptions":{},"views":107,"like_count":9,"has_summary":false,"last_poster_username":"Mattman","category_id":36,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":82,"green":73,"blue":54},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Ok. I’ll have to watch and read the subtitles a few more times and then it should sink in my head. Thanks","last_post_id":417809,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":9435,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9012,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"2.5D Bas Relief engravings/carvings","id":53389,"title":"2.5D Bas Relief engravings/carvings","slug":"2-5d-bas-relief-engravings-carvings","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":null,"created_at":"2026-02-25T04:09:48.226Z","last_posted_at":"2026-02-27T12:44:34.368Z","bumped":true,"bumped_at":"2026-02-27T12:44:34.368Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi. I’m new to the V1 Engineering forums. I am in the process of building the Lowrider V4 CNC machine with the Jackpot 3 control board. While I am new to the CNC world I do have experience with 3D pri…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":159,"like_count":5,"has_summary":false,"last_poster_username":"brenavich980","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"The fireman shield I did isn’t really a 2.5D carve. I just roughed out the image and carved the detail by hand. Much quicker if you have the tools.","last_post_id":417762,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14642,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":2373,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":7229,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":6509,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Using 3D-probe and TLS together","id":52908,"title":"Using 3D-probe and TLS together","slug":"using-3d-probe-and-tls-together","posts_count":10,"reply_count":5,"highest_post_number":11,"image_url":null,"created_at":"2026-01-18T13:39:05.864Z","last_posted_at":"2026-02-25T07:38:30.607Z","bumped":true,"bumped_at":"2026-02-25T07:38:30.607Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I would like to use my 3D-probe and TLS together, so I can have the TLS at a fix position on the CNC. \nWhat I’d like to achieve: Load the 3D-probe, touch it off on the TLS, then automatically do X/Y/Z…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":165,"like_count":3,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"It works though. If you are using the toolchanger, there is one position for the touch off, so the probe needs to use the toolsetter as well.","last_post_id":417579,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":48,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13441,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":972,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"ESTLCam exporting with incorrect encoding?","id":53379,"title":"ESTLCam exporting with incorrect encoding?","slug":"estlcam-exporting-with-incorrect-encoding","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2026-02-23T23:13:11.264Z","last_posted_at":"2026-02-24T22:13:02.866Z","bumped":true,"bumped_at":"2026-02-24T22:13:02.866Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"After creating and exporting a .gcode file from ESTLCam I attempt to run it via FluidNC. I receive: Alarm: 17 Improper Gcode in Line 1. If I open the same gcode file in a text editor, press Enter, del…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":68,"like_count":2,"has_summary":false,"last_poster_username":"ZackRich12","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thank you! This fixed the issue. I don’t believe I made this modification on the other machine. It seemed to work directly out of the box. For what it’s worth I moved from Mac (Intel) using Wine to Ma…","last_post_id":417527,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14648,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13219,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Using Estlcam on Touch screen windows all-in- one PC","id":53321,"title":"Using Estlcam on Touch screen windows all-in- one PC","slug":"using-estlcam-on-touch-screen-windows-all-in-one-pc","posts_count":7,"reply_count":5,"highest_post_number":7,"image_url":null,"created_at":"2026-02-18T12:55:03.742Z","last_posted_at":"2026-02-20T10:13:52.797Z","bumped":true,"bumped_at":"2026-02-20T10:13:52.797Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Has anyone tried using a ‘All-in’one’ pc with touch screen to control estlcam. \nI am looking to move my MPCNC to my new wood working workshop in my back yard and have no wifi there so was thinking I w…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":97,"like_count":2,"has_summary":false,"last_poster_username":"markal","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thanks, Looks like its a question of try it and see. Thanks for the input.","last_post_id":417045,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":511,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Cnc program/g code issues","id":53327,"title":"Cnc program/g code issues","slug":"cnc-program-g-code-issues","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-02-18T17:26:21.077Z","last_posted_at":"2026-02-18T17:52:46.203Z","bumped":true,"bumped_at":"2026-02-18T17:52:46.203Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"for some reason the projects im trying to to set up end up as creality g code not estlcam cnc program \nCribbageBoard.gcode (121.0 KB) this is the bad file \nkneelingsoldiersilhouette.nc (1.3 MB) this i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":60,"like_count":1,"has_summary":false,"last_poster_username":"orob","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"The .nc vs .gcode appended to your cam file generated in estlcam depends on which machine you are generating code for.  In your basic settings you select the machine type and can make customizations f…","last_post_id":416690,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11751,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Applying the same toolpath to multiple drawing objects in EstlCAM","id":53301,"title":"Applying the same toolpath to multiple drawing objects in EstlCAM","slug":"applying-the-same-toolpath-to-multiple-drawing-objects-in-estlcam","posts_count":15,"reply_count":10,"highest_post_number":15,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/d/7dfd7377772a965b9fd16674eeccb127da150d46_2_1024x519.png","created_at":"2026-02-16T17:53:29.215Z","last_posted_at":"2026-02-17T19:38:16.005Z","bumped":true,"bumped_at":"2026-02-17T19:38:16.005Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m trying to create multiple hole toolpaths in EstlCAM.  It’s for a text box, which means I basically have to click each and every object in the file, screenshot below: \n  \nI can use Select → Select …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1158,"height":588,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/7/d/7dfd7377772a965b9fd16674eeccb127da150d46.png"},{"max_width":1024,"max_height":1024,"width":1024,"height":519,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/d/7dfd7377772a965b9fd16674eeccb127da150d46_2_1024x519.png"},{"max_width":800,"max_height":800,"width":800,"height":406,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/d/7dfd7377772a965b9fd16674eeccb127da150d46_2_800x406.png"},{"max_width":400,"max_height":400,"width":400,"height":203,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/d/7dfd7377772a965b9fd16674eeccb127da150d46_2_400x203.png"},{"max_width":200,"max_height":200,"width":200,"height":101,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/d/7dfd7377772a965b9fd16674eeccb127da150d46_2_200x101.png"},{"max_width":100,"max_height":100,"width":100,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/d/7dfd7377772a965b9fd16674eeccb127da150d46_2_100x50.png"},{"max_width":50,"max_height":50,"width":50,"height":25,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/d/7dfd7377772a965b9fd16674eeccb127da150d46_2_50x25.png"}],"tags":[],"tags_descriptions":{},"views":97,"like_count":6,"has_summary":false,"last_poster_username":"MohnJadden","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":11,"green":11,"blue":11},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"The bit about Estlcam typed text was a facepalm inducing moment - I hadn’t done anything with text at all before and completely forgot it had existed.  A few quick clicks with it has something I can t…","last_post_id":416563,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"LR3 and EstlCAM v13","id":53296,"title":"LR3 and EstlCAM v13","slug":"lr3-and-estlcam-v13","posts_count":14,"reply_count":7,"highest_post_number":14,"image_url":null,"created_at":"2026-02-16T16:31:09.600Z","last_posted_at":"2026-02-17T17:57:52.776Z","bumped":true,"bumped_at":"2026-02-17T17:57:52.776Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The problem may be related to the LR3 and EstlCAM v13. \nI haven’t used my LR3 since last summer, which is \ncontrolled by the old SKR Pro board. \nI installed EstlCAM v13 and imported the settings from …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":115,"like_count":6,"has_summary":false,"last_poster_username":"dalrun","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"my bad","last_post_id":416549,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":5351,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":10827,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Estlcam job restarts","id":53238,"title":"Estlcam job restarts","slug":"estlcam-job-restarts","posts_count":18,"reply_count":7,"highest_post_number":18,"image_url":null,"created_at":"2026-02-11T12:42:29.096Z","last_posted_at":"2026-02-12T20:51:28.131Z","bumped":true,"bumped_at":"2026-02-12T20:51:28.131Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Can someone explain to me why once the job finishes and returns to home it restarts the job it just started doing it I’m puzzled","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":137,"like_count":2,"has_summary":false,"last_poster_username":"elyama","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thanks everyone i think i have it fixed some of the estlcam settings where not right (how that happened is a mystery)","last_post_id":415979,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":11751,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9012,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Disable cutting element?","id":52493,"title":"Disable cutting element?","slug":"disable-cutting-element","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-12-21T18:33:37.094Z","last_posted_at":"2026-02-12T17:54:40.483Z","bumped":true,"bumped_at":"2026-02-12T17:54:40.483Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Besides undo one other major missing thing I’ve yet to find is a way to disable a cutting element without deleting it. \nThere are times where you want to do a test cut, or recut an element. Currently …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":87,"like_count":0,"has_summary":false,"last_poster_username":"dalrun","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Save the project, use ‘(Ctrl-A (+)) (Shift +) left-click (+ drag)’ and Delete to reduce the set paths to what you want to test/(re)cut and Save program or Start machining. Reload the saved project to …","last_post_id":415921,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14251,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"EstlCam13 Error when Selecting SVG/DXF","id":53225,"title":"EstlCam13 Error when Selecting SVG/DXF","slug":"estlcam13-error-when-selecting-svg-dxf","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/a/dae5ba260d46da3c6238bfea78649f3f2f769eef_2_1024x780.png","created_at":"2026-02-09T18:07:45.258Z","last_posted_at":"2026-02-12T17:05:20.450Z","bumped":true,"bumped_at":"2026-02-12T17:05:20.450Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"@christian-knuell I am using the latest Estlcam 13.002A.  When trying to hold shift/right click to drag and select the drawing so I can rotate it, half way across the drawing it just locks up, I get a…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":2746,"height":2094,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/d/a/dae5ba260d46da3c6238bfea78649f3f2f769eef.png"},{"max_width":1024,"max_height":1024,"width":1024,"height":780,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/a/dae5ba260d46da3c6238bfea78649f3f2f769eef_2_1024x780.png"},{"max_width":800,"max_height":800,"width":800,"height":610,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/a/dae5ba260d46da3c6238bfea78649f3f2f769eef_2_800x610.png"},{"max_width":400,"max_height":400,"width":400,"height":305,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/a/dae5ba260d46da3c6238bfea78649f3f2f769eef_2_400x305.png"},{"max_width":200,"max_height":200,"width":200,"height":152,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/a/dae5ba260d46da3c6238bfea78649f3f2f769eef_2_200x152.png"},{"max_width":100,"max_height":100,"width":100,"height":76,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/a/dae5ba260d46da3c6238bfea78649f3f2f769eef_2_100x76.png"},{"max_width":50,"max_height":50,"width":50,"height":38,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/a/dae5ba260d46da3c6238bfea78649f3f2f769eef_2_50x38.png"}],"tags":[],"tags_descriptions":{},"views":82,"like_count":3,"has_summary":false,"last_poster_username":"dalrun","category_id":36,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I think that ‘(Shift +) right-click (+ drag)’ was the original v12 method of selecting one or more drawing objects. I like the newer left-click options and would vote for removing all right-click Sele…","last_post_id":415912,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Q: UNDO in EstlCAM v12 or v11? Ans: Nope. Workaround: Use EstlCameo &amp; Autohotkey","id":52182,"title":"Q: UNDO in EstlCAM v12 or v11? Ans: Nope. Workaround: Use EstlCameo & Autohotkey","slug":"q-undo-in-estlcam-v12-or-v11-ans-nope-workaround-use-estlcameo-autohotkey","posts_count":71,"reply_count":50,"highest_post_number":71,"image_url":null,"created_at":"2025-11-30T21:25:02.126Z","last_posted_at":"2026-02-04T08:59:50.544Z","bumped":true,"bumped_at":"2026-02-04T08:59:50.544Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"One of the most annoying things in estlcam is that it seems there is no way to undo something? \nLike if you accidentally delete something you didn’t mean to etc. is this true? Or am I just missing som…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":859,"like_count":108,"has_summary":true,"last_poster_username":"christian-knuell","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hello, \n“auto save” was the wrong wording - “auto backup” is more fitting. \nIt does not alter the project file you create by menu “file” / “save”. \nIt just crates a hidden backup that remains unused u…","last_post_id":414590,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14251,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10851,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7147,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":48,"primary_group_id":null,"flair_group_id":null}]}]}}