{"users":[{"id":-1,"username":"system","name":"system","avatar_template":"//us1.dh-cdn.net/uploads/db5587/original/2X/8/80a6ba28d95c089e3a0b7432139a26faa946cd84.png","admin":true,"moderator":true,"trust_level":4},{"id":353,"username":"jeffeb3","name":"Jeffeb3","avatar_template":"/user_avatar/forum.v1e.com/jeffeb3/{size}/91905_2.png","trust_level":4},{"id":4935,"username":"Melcour","name":"Melcour","avatar_template":"/letter_avatar_proxy/v4/letter/m/eb9ed0/{size}.png","trust_level":2},{"id":5226,"username":"Tokoloshe","name":"Philipp","avatar_template":"/user_avatar/forum.v1e.com/tokoloshe/{size}/26379_2.png","primary_group_name":"patrons","trust_level":3},{"id":8782,"username":"orob","name":"","avatar_template":"/user_avatar/forum.v1e.com/orob/{size}/62644_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":2,"username":"vicious1","name":"Ryan","avatar_template":"/user_avatar/forum.v1e.com/vicious1/{size}/104426_2.png","admin":true,"moderator":true,"trust_level":4},{"id":11638,"username":"spsully2582","name":"","avatar_template":"/user_avatar/forum.v1e.com/spsully2582/{size}/74139_2.png","trust_level":2},{"id":10790,"username":"Ursidae","name":"","avatar_template":"/user_avatar/forum.v1e.com/ursidae/{size}/62094_2.png","trust_level":1},{"id":10626,"username":"jonsar13","name":"Jonsar13","avatar_template":"/user_avatar/forum.v1e.com/jonsar13/{size}/60440_2.png","trust_level":2},{"id":8581,"username":"RockinRiley","name":"Riley","avatar_template":"/user_avatar/forum.v1e.com/rockinriley/{size}/52190_2.png","trust_level":3},{"id":9253,"username":"MakerJim","name":"","avatar_template":"/user_avatar/forum.v1e.com/makerjim/{size}/87766_2.png","trust_level":3},{"id":2965,"username":"thanosvolosx","name":"Thanos","avatar_template":"/letter_avatar_proxy/v4/letter/t/59ef9b/{size}.png","trust_level":1},{"id":5647,"username":"SupraGuy","name":"Dan","avatar_template":"/user_avatar/forum.v1e.com/supraguy/{size}/37950_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14542,"username":"Tylas","name":"Ty","avatar_template":"/user_avatar/forum.v1e.com/tylas/{size}/113153_2.png","trust_level":3},{"id":1620,"username":"snoozedoggydog","name":"Phil Haddon","avatar_template":"/letter_avatar_proxy/v4/letter/s/d07c76/{size}.png","trust_level":1},{"id":1621,"username":"antoinedellieu","name":"Antoine","avatar_template":"/letter_avatar_proxy/v4/letter/a/5f9b8f/{size}.png","trust_level":1},{"id":7286,"username":"Britt","name":"Britt Percival","avatar_template":"/user_avatar/forum.v1e.com/britt/{size}/62440_2.png","trust_level":3},{"id":1683,"username":"kc7air","name":"Patrick McVey","avatar_template":"/user_avatar/forum.v1e.com/kc7air/{size}/35048_2.png","trust_level":2},{"id":10827,"username":"Bartman","name":"","avatar_template":"/user_avatar/forum.v1e.com/bartman/{size}/63661_2.png","trust_level":2},{"id":2236,"username":"jamiek","name":"Jamie","avatar_template":"/user_avatar/forum.v1e.com/jamiek/{size}/104441_2.png","trust_level":3},{"id":2207,"username":"twolf","name":"Tim","avatar_template":"/letter_avatar_proxy/v4/letter/t/f1d935/{size}.png","trust_level":2},{"id":2828,"username":"peter","name":"Peter","avatar_template":"/letter_avatar_proxy/v4/letter/p/278dde/{size}.png","trust_level":2},{"id":14868,"username":"RebornBeat","name":"RebornBeat","avatar_template":"/user_avatar/forum.v1e.com/rebornbeat/{size}/116275_2.png","trust_level":1},{"id":9983,"username":"Michael2501","name":"","avatar_template":"/user_avatar/forum.v1e.com/michael2501/{size}/54269_2.png","trust_level":1},{"id":4103,"username":"Jonathjon","name":"Jonathan Jones","avatar_template":"/user_avatar/forum.v1e.com/jonathjon/{size}/70532_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":1137,"username":"am0254338","name":"Andy M.","avatar_template":"/letter_avatar_proxy/v4/letter/a/e47c2d/{size}.png","trust_level":1},{"id":748,"username":"forcerouge","name":"Roger","avatar_template":"/user_avatar/forum.v1e.com/forcerouge/{size}/15977_2.png","trust_level":2},{"id":1333,"username":"mars72","name":"Marshall","avatar_template":"/user_avatar/forum.v1e.com/mars72/{size}/71878_2.png","trust_level":2},{"id":268,"username":"barry99705","name":"Barry","avatar_template":"/user_avatar/forum.v1e.com/barry99705/{size}/15876_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14663,"username":"Matthias_Schuff","name":"Matthias Schuff","avatar_template":"/user_avatar/forum.v1e.com/matthias_schuff/{size}/113805_2.png","trust_level":1},{"id":14365,"username":"Wolf1","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/w/8e8cbc/{size}.png","trust_level":1},{"id":6008,"username":"DanR","name":"Dan Roscigno","avatar_template":"/user_avatar/forum.v1e.com/danr/{size}/60490_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14650,"username":"Coskun_KEYFLI","name":"Coşkun KEYFLİ","avatar_template":"/user_avatar/forum.v1e.com/coskun_keyfli/{size}/113698_2.png","trust_level":0},{"id":3692,"username":"ttraband","name":"Tom Traband","avatar_template":"/user_avatar/forum.v1e.com/ttraband/{size}/16479_2.png","trust_level":3},{"id":14637,"username":"ckeyfli","name":"Coşkun KEYFLİ","avatar_template":"/user_avatar/forum.v1e.com/ckeyfli/{size}/113404_2.png","trust_level":0},{"id":849,"username":"klinke","name":"klinke","avatar_template":"/letter_avatar_proxy/v4/letter/k/e19b73/{size}.png","trust_level":1},{"id":54,"username":"dkj4linux","name":"dkj4linux","avatar_template":"/user_avatar/forum.v1e.com/dkj4linux/{size}/15860_2.png","trust_level":3},{"id":7425,"username":"ragadinks","name":null,"avatar_template":"/user_avatar/forum.v1e.com/ragadinks/{size}/36409_2.png","trust_level":2},{"id":14541,"username":"leprehd","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/l/f9ae1b/{size}.png","trust_level":2},{"id":12050,"username":"pnorsworthy","name":"pnorsworthy","avatar_template":"/letter_avatar_proxy/v4/letter/p/ebca7d/{size}.png","trust_level":1},{"id":972,"username":"niget2002","name":"David Walling","avatar_template":"/user_avatar/forum.v1e.com/niget2002/{size}/29757_2.png","trust_level":3},{"id":4951,"username":"JoeyGee","name":"Joe Gillen","avatar_template":"/letter_avatar_proxy/v4/letter/j/a9a28c/{size}.png","trust_level":1},{"id":5875,"username":"mbamberg","name":"Mike Bamberg","avatar_template":"/user_avatar/forum.v1e.com/mbamberg/{size}/62423_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":2},{"id":9012,"username":"CesarH","name":"cesar","avatar_template":"/user_avatar/forum.v1e.com/cesarh/{size}/60720_2.png","trust_level":3},{"id":12027,"username":"MohnJadden","name":"","avatar_template":"/user_avatar/forum.v1e.com/mohnjadden/{size}/81032_2.png","trust_level":1},{"id":12653,"username":"dos","name":"Daryl","avatar_template":"/user_avatar/forum.v1e.com/dos/{size}/92778_2.png","trust_level":2},{"id":2430,"username":"toddhacker","name":"Todd Hacker","avatar_template":"/letter_avatar_proxy/v4/letter/t/77aa72/{size}.png","trust_level":2},{"id":6947,"username":"DesignFlaw06","name":"Tim","avatar_template":"/user_avatar/forum.v1e.com/designflaw06/{size}/34419_2.png","trust_level":2},{"id":11259,"username":"jeyeager","name":"Jason Yeager","avatar_template":"/user_avatar/forum.v1e.com/jeyeager/{size}/71643_2.png","trust_level":3},{"id":13441,"username":"Wittiko","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/w/eb9ed0/{size}.png","trust_level":2},{"id":9714,"username":"Basti92","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/b/ecccb3/{size}.png","trust_level":1},{"id":3348,"username":"robertbu","name":"Robert Bunney","avatar_template":"/user_avatar/forum.v1e.com/robertbu/{size}/62426_2.png","trust_level":2},{"id":4859,"username":"Bigchepin","name":"Gato","avatar_template":"/user_avatar/forum.v1e.com/bigchepin/{size}/22143_2.png","trust_level":3},{"id":14268,"username":"DIY_Engineer","name":"DIY Engineer","avatar_template":"/user_avatar/forum.v1e.com/diy_engineer/{size}/108897_2.png","trust_level":2},{"id":11745,"username":"elegantdesignservice","name":"Morris Ridenour","avatar_template":"/user_avatar/forum.v1e.com/elegantdesignservice/{size}/110838_2.png","trust_level":2},{"id":14442,"username":"Nate_Forsythe","name":"Nate Forsythe","avatar_template":"/user_avatar/forum.v1e.com/nate_forsythe/{size}/110832_2.png","trust_level":1},{"id":3142,"username":"kvcummins","name":"K Cummins","avatar_template":"/user_avatar/forum.v1e.com/kvcummins/{size}/16030_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":8548,"username":"Dreyfus","name":"","avatar_template":"/user_avatar/forum.v1e.com/dreyfus/{size}/107209_2.png","trust_level":2},{"id":2149,"username":"dubir","name":"Dubi","avatar_template":"/letter_avatar_proxy/v4/letter/d/9f8e36/{size}.png","trust_level":1},{"id":1687,"username":"guffy","name":"Guffy","avatar_template":"/letter_avatar_proxy/v4/letter/g/e9a140/{size}.png","trust_level":2},{"id":1341,"username":"cyberhiker","name":"David Doyle","avatar_template":"/letter_avatar_proxy/v4/letter/c/b782af/{size}.png","trust_level":1},{"id":14417,"username":"arik.zisman","name":"Arik","avatar_template":"/user_avatar/forum.v1e.com/arik.zisman/{size}/110500_2.png","trust_level":0},{"id":14397,"username":"JohnnyPatrimony","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/j/f0a364/{size}.png","trust_level":1},{"id":10186,"username":"azab2c","name":"Aza B2C","avatar_template":"/user_avatar/forum.v1e.com/azab2c/{size}/98228_2.png","trust_level":3},{"id":9881,"username":"ichiban","name":"","avatar_template":"/user_avatar/forum.v1e.com/ichiban/{size}/53416_2.png","trust_level":1},{"id":244,"username":"jono035","name":"Jono","avatar_template":"/user_avatar/forum.v1e.com/jono035/{size}/28_2.png","trust_level":3},{"id":6768,"username":"stevempotter","name":"Steve M Potter","avatar_template":"/user_avatar/forum.v1e.com/stevempotter/{size}/35614_2.png","trust_level":2}],"primary_groups":[{"id":41,"name":"patrons"}],"flair_groups":[{"id":41,"name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/mostly-printed-cnc-mpcnc/cut-speeds-and-settings/22?page=1","per_page":30,"top_tags":["gallery-mpcnc","laser","sandify"],"topics":[{"fancy_title":"About the Advice category","id":3552,"title":"About the Advice category","slug":"about-the-advice-category","posts_count":2,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2019-11-23T09:16:47.225Z","last_posted_at":"2021-08-06T16:32:56.764Z","bumped":true,"bumped_at":"2021-08-06T15:06:21.725Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"This category is for questions before you build or buy something related to the MPCNC.","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1256,"like_count":0,"has_summary":false,"last_poster_username":"jeffeb3","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"","last_post_id":190790,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":-1,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Rebuild the MPCNC or Lowrider v4 upgrade","id":52280,"title":"Rebuild the MPCNC or Lowrider v4 upgrade","slug":"rebuild-the-mpcnc-or-lowrider-v4-upgrade","posts_count":36,"reply_count":20,"highest_post_number":36,"image_url":null,"created_at":"2025-12-07T04:29:38.242Z","last_posted_at":"2026-07-14T10:11:05.241Z","bumped":true,"bumped_at":"2026-07-14T10:11:05.241Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all it’s been a long time. \nSo a couple kids later and I’m finally getting back to some shed time and dusting off the MPCNC. \nI have a pesky core wobble I just can’t get rid of and suspect I will …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":665,"like_count":26,"has_summary":false,"last_poster_username":"Melcour","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Same here @spsully2582  Hammer and punch. I plan on printing them again so will give it a light sand this time. @vicious1 You know if you can’t fix it with a hammer then you need a bigger hammer <img src=\"https://forum.v1e.com/images/emoji/google/slight_smile.png?v=15\" title=\":slight_smile:\" class=\"emoji\" alt=\":slight_smile:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":434704,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4935,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Molten dupont connectors","id":54232,"title":"Molten dupont connectors","slug":"molten-dupont-connectors","posts_count":18,"reply_count":11,"highest_post_number":18,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_576x1024.jpeg","created_at":"2026-06-05T15:09:22.044Z","last_posted_at":"2026-06-30T20:20:57.359Z","bumped":true,"bumped_at":"2026-06-30T20:20:57.359Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey there today i turned on the machine and the x axis was jamming so i checked the wiring. \nI got a Primo with the SKR Pro 1.2 and this housing with DP 15/25 connectors: \nhttps://www.thingiverse.com/…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":900,"height":1600,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8.jpeg"},{"max_width":1024,"max_height":1024,"width":576,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_576x1024.jpeg"},{"max_width":800,"max_height":800,"width":450,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_450x800.jpeg"},{"max_width":400,"max_height":400,"width":225,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_225x400.jpeg"},{"max_width":200,"max_height":200,"width":112,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_112x200.jpeg"},{"max_width":100,"max_height":100,"width":56,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_56x100.jpeg"},{"max_width":50,"max_height":50,"width":28,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_28x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":235,"like_count":12,"has_summary":false,"last_poster_username":"MakerJim","category_id":22,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":78,"green":77,"blue":69},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Yes, it does… I didn’t mention the actions of the driver or the impacts of that poor contact connection in trying to establish the current we set through the circuit. \nI made a mathematically simple …","last_post_id":433904,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10790,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10626,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8581,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Controller Advice","id":54323,"title":"Controller Advice","slug":"controller-advice","posts_count":8,"reply_count":3,"highest_post_number":8,"image_url":null,"created_at":"2026-06-21T10:08:37.195Z","last_posted_at":"2026-06-24T20:37:54.328Z","bumped":true,"bumped_at":"2026-06-24T20:37:54.328Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello ! First of all I am running a MPCNC with ramps and marlin for years now and didn’t have any problem except some burnt drivers and common stuff . I want to upgrade it somehow to a better board no…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":166,"like_count":10,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Yeah, but not the Jackpot. Too much hassle with warranty. It’s available from Elecrow.","last_post_id":433545,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2965,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":14542,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"UK import tax on a full kit","id":7612,"title":"UK import tax on a full kit","slug":"uk-import-tax-on-a-full-kit","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":null,"created_at":"2018-06-17T00:51:04.000Z","last_posted_at":"2026-05-21T18:33:51.481Z","bumped":true,"bumped_at":"2026-05-21T18:33:51.481Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi \nI was considering buying a mpcnc kit. \n1: To give something back to the developer. \n2: time effort and specification checking. \nBut is there anyone on here that’s from the UK and got hit with impo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":457,"like_count":2,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Definitely. The current kits are plug and play basically, with a little Lego for grownups in between. <img src=\"https://forum.v1e.com/images/emoji/google/grinning_face_with_smiling_eyes.png?v=15\" title=\":grinning_face_with_smiling_eyes:\" class=\"emoji\" alt=\":grinning_face_with_smiling_eyes:\" loading=\"lazy\" width=\"20\" height=\"20\"> \nThe UK is in a shitty position because taxes from the EU are basically the same…","last_post_id":431329,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1620,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1621,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Mounting Jackpot3 board","id":54111,"title":"Mounting Jackpot3 board","slug":"mounting-jackpot3-board","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-21T00:53:22.246Z","last_posted_at":"2026-05-21T01:01:53.801Z","bumped":true,"bumped_at":"2026-05-21T01:01:53.801Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a MPCNC where the SKR board is mounted below the base. I am upgrading to the Jackpot3 board and changing the 12V PS to 24V. I’m thinking I can simply swap it out and replace. Or, does it have t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":48,"like_count":0,"has_summary":false,"last_poster_username":"Bartman","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Mounting location is really only limited by cable length, and by antenna interference (antenna should not be restricted by cabling, metal enclosures, or solid objects)","last_post_id":431290,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1683,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10827,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Quantified Stiffness","id":10651,"title":"Quantified Stiffness","slug":"quantified-stiffness","posts_count":14,"reply_count":2,"highest_post_number":14,"image_url":"//us1.dh-cdn.net/uploads/db5587/original/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002.jpeg","created_at":"2019-06-16T20:58:44.000Z","last_posted_at":"2026-05-11T15:33:17.122Z","bumped":true,"bumped_at":"2026-05-11T15:33:17.122Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am contemplating some mods to improve stiffness, in particular for the case of taller-than-recommended Z axis. \nI have made some measurements using a known load and a dial indicator, although it was…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":740,"height":458,"url":"//us1.dh-cdn.net/uploads/db5587/original/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":247,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002_2_400x247.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":123,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002_2_200x123.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":61,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002_2_100x61.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":30,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002_2_50x30.jpeg"}],"tags":[],"tags_descriptions":{},"views":2550,"like_count":6,"has_summary":false,"last_poster_username":"vicious1","category_id":22,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":221,"green":226,"blue":203},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I turned on the autolock a few months back older threads will start locking pretty soon. I went back and hand locked a few hundred, but the other thousands will happen when the time limit happens with…","last_post_id":430499,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2236,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2207,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2828,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14868,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Hilfe bei der Verkabelung Spindel mit FU und die Programmierung der Parameter","id":54020,"title":"Hilfe bei der Verkabelung Spindel mit FU und die Programmierung der Parameter","slug":"hilfe-bei-der-verkabelung-spindel-mit-fu-und-die-programmierung-der-parameter","posts_count":7,"reply_count":4,"highest_post_number":7,"image_url":null,"created_at":"2026-05-09T17:28:07.511Z","last_posted_at":"2026-05-10T05:53:07.638Z","bumped":true,"bumped_at":"2026-05-10T05:53:07.638Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi Leute. Ich hab eine Primo MPCNC - noch im Aufbau. Eine Frage zum FU. Ich hab heute mal geschaut. Ich hab das Modell H100-1.5S2-1B. Beim Stromanschluss sind da 3 Anschlüsse L1 L2 L3. Ich denke der S…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":76,"like_count":2,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Von der Nummer her sind die identisch. Nimm dir Google lense und hoffe, dass du genug aus dem Handbuch herausbekommst. Das ist der Grund, warum wir Anfängern von einer spindel abraten. Und auch die, d…","last_post_id":430405,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":9983,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"How to change MPCNC over to 3d Printer?","id":6198,"title":"How to change MPCNC over to 3d Printer?","slug":"how-to-change-mpcnc-over-to-3d-printer","posts_count":16,"reply_count":0,"highest_post_number":16,"image_url":null,"created_at":"2017-07-30T19:21:34.000Z","last_posted_at":"2026-05-10T03:44:55.983Z","bumped":true,"bumped_at":"2026-05-10T03:44:55.983Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \n   Late last week i put in my order for the mpcnc kit. I bought the electronics kit as well as the printed parts. Ill be using 1\" stainless tube and a import 500w spindle. I went with th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":5242,"like_count":1,"has_summary":false,"last_poster_username":"RebornBeat","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"@forcerouge Did you capture anything from your research? I am actually looking at some new insights on this would be fun to go over it.","last_post_id":430401,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1137,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":748,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14868,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot 3 oops","id":53937,"title":"Jackpot 3 oops","slug":"jackpot-3-oops","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_768x1024.jpeg","created_at":"2026-04-29T04:10:12.281Z","last_posted_at":"2026-04-29T23:26:13.487Z","bumped":true,"bumped_at":"2026-04-29T23:26:13.487Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I somehow knocked off the capacitor for connector C on my brand new Jackpot 3. I am not using connector C for my MPCNC. Should I mess with trying to re-solder the capacitor? Or will it be fine as long…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2560,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":142,"like_count":12,"has_summary":false,"last_poster_username":"mars72","category_id":22,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Not sure what happened. Just noticed it had fallen off… Maybe it wasn’t soldered well to begin with. Thx everyone. I’ll power it up this evening.","last_post_id":429608,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1333,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":268,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Looking for the cable chain mounts","id":53520,"title":"Looking for the cable chain mounts","slug":"looking-for-the-cable-chain-mounts","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2026-03-09T08:33:13.451Z","last_posted_at":"2026-03-09T12:54:26.033Z","bumped":true,"bumped_at":"2026-03-09T12:54:26.033Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \nI recently saw the build by @Wolf1 and I’m impressed—really great work! It looks very clean. \nI’m currently looking for the right cable chain mounts for my MPCNC Primo. While I’ve found …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":88,"like_count":1,"has_summary":false,"last_poster_username":"Matthias_Schuff","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thank you Wolf!","last_post_id":424771,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14663,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14365,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Should I see a CNC or Cut icon on the TFT 3.5 when using release 3-22-23?","id":53443,"title":"Should I see a CNC or Cut icon on the TFT 3.5 when using release 3-22-23?","slug":"should-i-see-a-cnc-or-cut-icon-on-the-tft-3-5-when-using-release-3-22-23","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/c/4c174eacab65e54452d42dc6e176009737707fc1.jpeg","created_at":"2026-03-01T17:37:44.662Z","last_posted_at":"2026-03-01T22:32:31.457Z","bumped":true,"bumped_at":"2026-03-01T22:32:31.457Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My old TFT install showed a Cut menu, but the update shows Print. Is it ok to use for CNC operations? This is what I remember seeing: \n  \nThis is the firmare that I installed:","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1000,"height":706,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/c/4c174eacab65e54452d42dc6e176009737707fc1.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":564,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/c/4c174eacab65e54452d42dc6e176009737707fc1_2_800x564.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":282,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/c/4c174eacab65e54452d42dc6e176009737707fc1_2_400x282.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":141,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/c/4c174eacab65e54452d42dc6e176009737707fc1_2_200x141.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":70,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/c/4c174eacab65e54452d42dc6e176009737707fc1_2_100x70.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":35,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/c/4c174eacab65e54452d42dc6e176009737707fc1_2_50x35.jpeg"}],"tags":[],"tags_descriptions":{},"views":53,"like_count":8,"has_summary":false,"last_poster_username":"Bartman","category_id":22,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{"red":27,"green":26,"blue":28},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I can confirm that screen is the most current one, and works well","last_post_id":418035,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6008,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":10827,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Looking for tool mount STL for Makita RT0702C","id":53382,"title":"Looking for tool mount STL for Makita RT0702C","slug":"looking-for-tool-mount-stl-for-makita-rt0702c","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2026-02-24T14:22:35.770Z","last_posted_at":"2026-02-24T15:27:12.245Z","bumped":true,"bumped_at":"2026-02-24T15:27:12.245Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, \nI am currently building an MPCNC as a summer project with my two sons and we are really excited to get it running. \nWe recently bought a Makita RT0702C router for our build. Now, we n…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":83,"like_count":1,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Yeah. The new version also has a restart safety (which isn’t great for CNCs… <img src=\"https://forum.v1e.com/images/emoji/google/disappointed_face.png?v=15\" title=\":disappointed_face:\" class=\"emoji\" alt=\":disappointed_face:\" loading=\"lazy\" width=\"20\" height=\"20\">).","last_post_id":417488,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14650,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Mounting inserts into the tubing","id":53330,"title":"Mounting inserts into the tubing","slug":"mounting-inserts-into-the-tubing","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-02-18T22:14:42.453Z","last_posted_at":"2026-02-19T17:01:17.613Z","bumped":true,"bumped_at":"2026-02-19T17:01:17.613Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi Folks, I built a Primo a few years ago and recently moved. I am reassembling things now. Back when I built it someone posted some 3D printed supports for the tape measure trick that are made up of …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":73,"like_count":3,"has_summary":false,"last_poster_username":"ttraband","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Want to mark yourself as your own solution? That might help future searchers.","last_post_id":416896,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":6008,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Seeking clarification on part quantities and print settings for MPCNC Primo (C-23.5mm)","id":53320,"title":"Seeking clarification on part quantities and print settings for MPCNC Primo (C-23.5mm)","slug":"seeking-clarification-on-part-quantities-and-print-settings-for-mpcnc-primo-c-23-5mm","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-02-18T11:35:57.532Z","last_posted_at":"2026-02-18T14:17:36.261Z","bumped":true,"bumped_at":"2026-02-18T14:17:36.261Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello V1 Engineering Team, \nI am starting my first MPCNC build using the ‘Mostly Printed CNC Primo Version (C-23.5mm)’ files. Since I do not own a 3D printer, I am planning to outsource the printing t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":74,"like_count":3,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hey there, just a heads up: this is against the non-commercial license Ryan published the CNC under if you pay someone else for it. \nI am licensed in the EU, in America and the rest of the world is @…","last_post_id":416653,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14637,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Estlcam under Linux?","id":5269,"title":"Estlcam under Linux?","slug":"estlcam-under-linux","posts_count":82,"reply_count":39,"highest_post_number":83,"image_url":null,"created_at":"2017-01-26T23:27:48.000Z","last_posted_at":"2026-02-16T11:22:50.041Z","bumped":true,"bumped_at":"2026-02-16T11:22:50.041Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am a long time (mostly satisfied) Linux-only computer user … Any chance to get Estlcam to ran e.g. under wine, virtualbox, qemu? Any experiences available?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":12669,"like_count":47,"has_summary":true,"last_poster_username":"leprehd","category_id":22,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I’m on linuxmint 22.2 and using bottles (flatpak). \nWorks flawlessly so far, just had to switch from soda to sys-wine for the runner. \n ","last_post_id":416376,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":849,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":54,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7425,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14541,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Can I lift my MPCNC","id":53270,"title":"Can I lift my MPCNC","slug":"can-i-lift-my-mpcnc","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2026-02-14T02:03:05.573Z","last_posted_at":"2026-02-14T04:00:04.819Z","bumped":true,"bumped_at":"2026-02-14T04:00:04.819Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am attempting to wood carve a Rocky Mountain landscape.  As you can imagine the elevations could be a problem.  My question is, does anyone see an issue with rising the MPCNC at the corners so the r…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":118,"like_count":2,"has_summary":false,"last_poster_username":"niget2002","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"That’s still going to induce a large torque on the machine. You’ll probably be fine. You’ll just need to take shallower cuts.","last_post_id":416150,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12050,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":972,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MPCNC Software","id":53243,"title":"MPCNC Software","slug":"mpcnc-software","posts_count":9,"reply_count":3,"highest_post_number":9,"image_url":null,"created_at":"2026-02-12T00:14:28.949Z","last_posted_at":"2026-02-12T03:56:53.223Z","bumped":true,"bumped_at":"2026-02-12T03:56:53.223Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I built an MPCNC about 4 years ago. I used a Rambo board, but I don’t remember the version. At the time,  I used Elstcam and Repetier-host. They worked OK, but I wasn’t really happy with them. I am ge…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":144,"like_count":4,"has_summary":false,"last_poster_username":"MakerJim","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Please post here when you’re ready to use it again, the forum is great at helping folks get into (or back into) using their machines.","last_post_id":415871,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":4951,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5875,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":9012,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What kind of retail stores other than big boxes stock 3/4&rdquo; conduit?","id":52837,"title":"What kind of retail stores other than big boxes stock 3/4\" conduit?","slug":"what-kind-of-retail-stores-other-than-big-boxes-stock-3-4-conduit","posts_count":13,"reply_count":5,"highest_post_number":13,"image_url":null,"created_at":"2026-01-14T01:49:57.525Z","last_posted_at":"2026-01-15T13:20:24.013Z","bumped":true,"bumped_at":"2026-01-15T13:20:24.013Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I got the conduit for my MPCNC from my local big box hardware store.  I think the lengthwise gantry conduit is bowing upwards - it manifests when I’m doing pen plotting; a spring-loaded pen will draw …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":113,"like_count":3,"has_summary":false,"last_poster_username":"toddhacker","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I was able to get some good clean straight stuff at JEGS, shipping wasn’t too bad. https://www.jegs.com/webapp/wcs/stores/servlet/SearchResultsPageCmd?storeId=10001&amp;catalogId=10001&amp;langId=-1&amp;q=tubing","last_post_id":411649,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":12653,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2430,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Worth upgrading to 24V Jackpot V1 from 12V Einsy Rambo?","id":52801,"title":"Worth upgrading to 24V Jackpot V1 from 12V Einsy Rambo?","slug":"worth-upgrading-to-24v-jackpot-v1-from-12v-einsy-rambo","posts_count":18,"reply_count":14,"highest_post_number":18,"image_url":null,"created_at":"2026-01-11T22:42:30.891Z","last_posted_at":"2026-01-13T03:23:30.563Z","bumped":true,"bumped_at":"2026-01-13T03:23:30.563Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m moving on from the MPCNC to the Low Rider.  I ordered the kit just before the Jackpot V3 came out.  I just haven’t had the time to build the Low Rider until now so things just sat downstairs inclu…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":171,"like_count":20,"has_summary":false,"last_poster_username":"DesignFlaw06","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"You’re 100% correct and I agree with you.  And I probably asked the question in the wrong way. \nThe MPCNC is obviously a very capable design.  Whatever the reason is, it’s 100% on me.  I know my mach…","last_post_id":411257,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":6947,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13441,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Speed","id":34385,"title":"Speed","slug":"speed","posts_count":17,"reply_count":11,"highest_post_number":17,"image_url":null,"created_at":"2022-09-10T15:00:49.077Z","last_posted_at":"2026-03-03T22:32:40.653Z","bumped":true,"bumped_at":"2026-01-12T20:21:19.640Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, i just finished my mpcnc (which i’m vety proud of <img src=\"https://forum.v1e.com/images/emoji/google/grin.png?v=12\" title=\":grin:\" class=\"emoji\" alt=\":grin:\">), but i have a problem with the speed of the cnc. \nI used the speeds recommended in the build instruction for estlcam and repetier host but it se…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":678,"like_count":5,"has_summary":false,"last_poster_username":"vicious1","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":423999,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":9714,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":3348,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4859,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14268,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Recommended Laser for Newbie on Primo","id":52688,"title":"Recommended Laser for Newbie on Primo","slug":"recommended-laser-for-newbie-on-primo","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-01-05T17:32:55.593Z","last_posted_at":"2026-01-06T18:29:06.987Z","bumped":true,"bumped_at":"2026-01-06T18:35:02.986Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am a newbie on the form and currently finishing the build of my Primo.  I would like to add laser soon.  I want to engrave and cut 1/8” or less thick material. \n\nCan you recommend a great laser for …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":140,"like_count":3,"has_summary":false,"last_poster_username":"Bartman","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I have the LaserTree 10W module kit.  The kit comes with a sliding mount (that can be adapted to @DougJoseph’s kinematic tool holder for the LR3/LR4 - for the Primo you may need to design a mounting …","last_post_id":410042,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11745,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":10827,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"JST-PH connectors on steppers","id":52652,"title":"JST-PH connectors on steppers","slug":"jst-ph-connectors-on-steppers","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":null,"created_at":"2026-01-03T19:31:10.780Z","last_posted_at":"2026-01-03T22:50:00.118Z","bumped":true,"bumped_at":"2026-01-03T22:50:00.118Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have steppers that have 6 pin jst-ph female connectors on them already. Is there a best option to connect these to the jackpot 3 board? I have purchased the wiring kit from the store and have been t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":105,"like_count":9,"has_summary":false,"last_poster_username":"Nate_Forsythe","category_id":22,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"The wiring that was used with these motors originally The 2 center taps were not crossed so I’ll try them that way to start and go from there. Thanks for the help! I have all the A colored parts print…","last_post_id":409472,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14442,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Tramming an unlevel MPCNC: sanity check on spoilboard shims, please?","id":52517,"title":"Tramming an unlevel MPCNC: sanity check on spoilboard shims, please?","slug":"tramming-an-unlevel-mpcnc-sanity-check-on-spoilboard-shims-please","posts_count":15,"reply_count":9,"highest_post_number":15,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/f/1fb1e7e48d49114b3b25a7abf5f7bc03bc38a176.png","created_at":"2025-12-23T02:23:09.972Z","last_posted_at":"2025-12-24T21:39:06.575Z","bumped":true,"bumped_at":"2025-12-24T21:39:06.575Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve been chasing down a problem trying to get my Primo trammed.  Every time I measure the distance with a tramming measure tool and feeler gauges, the measurements look like the router is tilted towa…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":714,"height":482,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/f/1fb1e7e48d49114b3b25a7abf5f7bc03bc38a176.png"},{"max_width":400,"max_height":400,"width":400,"height":270,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/f/1fb1e7e48d49114b3b25a7abf5f7bc03bc38a176_2_400x270.png"},{"max_width":200,"max_height":200,"width":200,"height":135,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/f/1fb1e7e48d49114b3b25a7abf5f7bc03bc38a176_2_200x135.png"},{"max_width":100,"max_height":100,"width":100,"height":67,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/f/1fb1e7e48d49114b3b25a7abf5f7bc03bc38a176_2_100x67.png"},{"max_width":50,"max_height":50,"width":50,"height":33,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/f/1fb1e7e48d49114b3b25a7abf5f7bc03bc38a176_2_50x33.png"}],"tags":[],"tags_descriptions":{},"views":182,"like_count":4,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":26,"green":26,"blue":255},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Imgur says it can‘t be found, do you still have it private?","last_post_id":408111,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3142,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":8548,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"conduit available","id":9095,"title":"conduit available","slug":"conduit-available","posts_count":10,"reply_count":0,"highest_post_number":10,"image_url":null,"created_at":"2019-01-06T06:54:29.000Z","last_posted_at":"2025-12-21T14:53:46.068Z","bumped":true,"bumped_at":"2025-12-21T14:53:46.068Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi \nI have conduit available in my country: \n\n\n\n\nOutside Dimension (mm)\n\n\n\"3/4\n26.9\n\n\n\"1\n33.7\n\n\n\nWhat should i do with the print parts that have different dimension?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":570,"like_count":0,"has_summary":false,"last_poster_username":"arik.zisman","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hi Dubi I have a similar problem with the lowrider 4 in Israel did you find the right od tubing?","last_post_id":407606,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2149,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1687,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1341,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14417,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Leadscrew nut&hellip;2 screws or 4?","id":52431,"title":"Leadscrew nut...2 screws or 4?","slug":"leadscrew-nut-2-screws-or-4","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2025-12-15T20:27:54.977Z","last_posted_at":"2025-12-15T21:06:38.782Z","bumped":true,"bumped_at":"2025-12-15T21:06:38.782Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The instructions mention fastening the leadscrew nut with 2 screws, but there are holes for 4 - so should I use all 4?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":82,"like_count":9,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"As Jonathan said, it’s just about keeping them from turning.","last_post_id":406768,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14268,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Surfacing bit feedrate/stepover for Makita MPCNC?","id":52380,"title":"Surfacing bit feedrate/stepover for Makita MPCNC?","slug":"surfacing-bit-feedrate-stepover-for-makita-mpcnc","posts_count":13,"reply_count":8,"highest_post_number":13,"image_url":null,"created_at":"2025-12-12T20:05:25.531Z","last_posted_at":"2025-12-14T19:37:54.786Z","bumped":true,"bumped_at":"2025-12-14T19:37:54.786Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m about to do a surfacing run on a new MDF spoilboard.  I’ve got a 1 1/8” surfacing bit and it’s using a Makita router as a spindle.  What kind of feedrate and stepover % should I use?  I haven’t re…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":171,"like_count":13,"has_summary":false,"last_poster_username":"MohnJadden","category_id":22,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I’ve spent some time tramming and shimming, but I got to the point where I couldn’t cram any more shims between the mount and the router. \nAt this point I’m thinking this wiggle is probably related to…","last_post_id":406517,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Attribution/credits","id":52396,"title":"Attribution/credits","slug":"attribution-credits","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2025-12-13T16:50:11.034Z","last_posted_at":"2025-12-13T18:02:00.733Z","bumped":true,"bumped_at":"2025-12-13T18:02:00.733Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nMy question is specifically about attribution: \nDo products manufactured using the MPCNC Primo (for example CNC-cut or engraved items) require any attribution or credit to V1 Engineering or the M…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":72,"like_count":5,"has_summary":false,"last_poster_username":"azab2c","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"More details at https://www.v1e.com/pages/trademark-and-file-licenses","last_post_id":406297,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14397,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":10186,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Getting started 3 years late","id":51957,"title":"Getting started 3 years late","slug":"getting-started-3-years-late","posts_count":41,"reply_count":29,"highest_post_number":41,"image_url":null,"created_at":"2025-11-13T23:11:00.154Z","last_posted_at":"2025-12-09T04:05:18.462Z","bumped":true,"bumped_at":"2025-12-09T04:05:18.462Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey folks! \nI bought all the parts for a MPCNC an embarrassingly long time ago… almost exactly three years ago! Lot of life has happened since then, but I’m excited to finally build this thing. A coup…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":459,"like_count":21,"has_summary":false,"last_poster_username":"orob","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I wouldn’t call it a standard, but convention dictated by the firmware distributed here","last_post_id":405476,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":9881,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12653,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":244,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Has anyone tried this Z axis conduit vacuum for their MPCNC?","id":52305,"title":"Has anyone tried this Z axis conduit vacuum for their MPCNC?","slug":"has-anyone-tried-this-z-axis-conduit-vacuum-for-their-mpcnc","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-12-08T13:45:34.178Z","last_posted_at":"2025-12-08T17:59:40.171Z","bumped":true,"bumped_at":"2025-12-08T17:59:40.171Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve got a vacuum adapter for my MPCNC that runs a big sleeve up the router - hard to describe on no coffee. It’s pretty big and I’m not sure it’s all that efficient at suction (coming from a regular …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":113,"like_count":1,"has_summary":false,"last_poster_username":"stevempotter","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"This looks a lot like my design, which is on Thingiverse: Clear Dust Shoe for MPCNC Primo by Steve M. Potter by stevempotter - Thingiverse \nThe clear part is a spray varnish lid. \nHere is an album wit…","last_post_id":405334,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":6768,"primary_group_id":null,"flair_group_id":null}]}]}}