{"users":[{"id":-1,"username":"system","name":"system","avatar_template":"//us1.dh-cdn.net/uploads/db5587/original/2X/8/80a6ba28d95c089e3a0b7432139a26faa946cd84.png","admin":true,"moderator":true,"trust_level":4},{"id":13012,"username":"Timothy_Anderson","name":"Timothy Anderson","avatar_template":"/user_avatar/forum.v1e.com/timothy_anderson/{size}/102904_2.png","trust_level":1},{"id":9253,"username":"MakerJim","name":"","avatar_template":"/user_avatar/forum.v1e.com/makerjim/{size}/87766_2.png","trust_level":3},{"id":14134,"username":"shopmad","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/90db22/{size}.png","trust_level":1},{"id":10185,"username":"waimea","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/w/df788c/{size}.png","trust_level":3},{"id":11259,"username":"jeyeager","name":"Jason Yeager","avatar_template":"/user_avatar/forum.v1e.com/jeyeager/{size}/71643_2.png","trust_level":3},{"id":8782,"username":"orob","name":"","avatar_template":"/user_avatar/forum.v1e.com/orob/{size}/62644_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":7286,"username":"Britt","name":"Britt Percival","avatar_template":"/user_avatar/forum.v1e.com/britt/{size}/62440_2.png","trust_level":3},{"id":5226,"username":"Tokoloshe","name":"Philipp","avatar_template":"/user_avatar/forum.v1e.com/tokoloshe/{size}/26379_2.png","primary_group_name":"patrons","trust_level":3},{"id":10238,"username":"vincentw56","name":"Vincent Wright","avatar_template":"/user_avatar/forum.v1e.com/vincentw56/{size}/106564_2.png","trust_level":3},{"id":1686,"username":"makesomethingcool","name":"Lindsay Fowler","avatar_template":"/user_avatar/forum.v1e.com/makesomethingcool/{size}/207_2.png","trust_level":2},{"id":353,"username":"jeffeb3","name":"Jeffeb3","avatar_template":"/user_avatar/forum.v1e.com/jeffeb3/{size}/91905_2.png","trust_level":4},{"id":1292,"username":"billwarmisham","name":"BillW","avatar_template":"/letter_avatar_proxy/v4/letter/b/b487fb/{size}.png","trust_level":1},{"id":268,"username":"barry99705","name":"Barry","avatar_template":"/user_avatar/forum.v1e.com/barry99705/{size}/15876_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":6805,"username":"Jan_A","name":"Jan Alstrup","avatar_template":"/user_avatar/forum.v1e.com/jan_a/{size}/58440_2.png","trust_level":2},{"id":5647,"username":"SupraGuy","name":"Dan","avatar_template":"/user_avatar/forum.v1e.com/supraguy/{size}/37950_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":3348,"username":"robertbu","name":"Robert Bunney","avatar_template":"/user_avatar/forum.v1e.com/robertbu/{size}/62426_2.png","trust_level":2},{"id":14868,"username":"RebornBeat","name":"RebornBeat","avatar_template":"/user_avatar/forum.v1e.com/rebornbeat/{size}/116275_2.png","trust_level":1},{"id":2,"username":"vicious1","name":"Ryan","avatar_template":"/user_avatar/forum.v1e.com/vicious1/{size}/104426_2.png","admin":true,"moderator":true,"trust_level":4},{"id":9983,"username":"Michael2501","name":"","avatar_template":"/user_avatar/forum.v1e.com/michael2501/{size}/54269_2.png","trust_level":1},{"id":4103,"username":"Jonathjon","name":"Jonathan Jones","avatar_template":"/user_avatar/forum.v1e.com/jonathjon/{size}/70532_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14549,"username":"Markus_D","name":"Markus D.","avatar_template":"/user_avatar/forum.v1e.com/markus_d/{size}/114567_2.png","trust_level":1},{"id":14365,"username":"Wolf1","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/w/8e8cbc/{size}.png","trust_level":1},{"id":14247,"username":"Vasily","name":"Vasily aus Wien","avatar_template":"/user_avatar/forum.v1e.com/vasily/{size}/108571_2.png","trust_level":2},{"id":14663,"username":"Matthias_Schuff","name":"Matthias Schuff","avatar_template":"/user_avatar/forum.v1e.com/matthias_schuff/{size}/113805_2.png","trust_level":1},{"id":4130,"username":"Rloschy","name":"Bob ","avatar_template":"/letter_avatar_proxy/v4/letter/r/ebca7d/{size}.png","trust_level":1},{"id":7114,"username":"MattMed","name":"Matt M","avatar_template":"/user_avatar/forum.v1e.com/mattmed/{size}/62520_2.png","trust_level":2},{"id":8530,"username":"c00nphrog","name":"REvans","avatar_template":"/user_avatar/forum.v1e.com/c00nphrog/{size}/71133_2.png","trust_level":2},{"id":8649,"username":"Carter","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/c/e480ec/{size}.png","trust_level":1},{"id":14683,"username":"random_dude","name":"","avatar_template":"/user_avatar/forum.v1e.com/random_dude/{size}/103715_2.png","trust_level":0},{"id":3616,"username":"larryk","name":"Larry Kasper","avatar_template":"/letter_avatar_proxy/v4/letter/l/b5a626/{size}.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14541,"username":"leprehd","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/l/f9ae1b/{size}.png","trust_level":2},{"id":11745,"username":"elegantdesignservice","name":"Morris Ridenour","avatar_template":"/user_avatar/forum.v1e.com/elegantdesignservice/{size}/110838_2.png","trust_level":2},{"id":3958,"username":"robrevens","name":"Robrevens","avatar_template":"/user_avatar/forum.v1e.com/robrevens/{size}/16437_2.png","trust_level":2},{"id":594,"username":"jrlallo","name":"Jo Lallo","avatar_template":"/letter_avatar_proxy/v4/letter/j/45deac/{size}.png","trust_level":1},{"id":4859,"username":"Bigchepin","name":"Gato","avatar_template":"/user_avatar/forum.v1e.com/bigchepin/{size}/22143_2.png","trust_level":3},{"id":10383,"username":"thriller","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/t/47e85d/{size}.png","trust_level":2},{"id":1888,"username":"turbomacncheese","name":"Tony","avatar_template":"/user_avatar/forum.v1e.com/turbomacncheese/{size}/62418_2.png","trust_level":2},{"id":2798,"username":"turbinbjorn","name":"T","avatar_template":"/letter_avatar_proxy/v4/letter/t/53a042/{size}.png","trust_level":3},{"id":4429,"username":"B-26","name":"Paul ","avatar_template":"/user_avatar/forum.v1e.com/b-26/{size}/19907_2.png","trust_level":2},{"id":2293,"username":"azron","name":"AZ_Ron","avatar_template":"/letter_avatar_proxy/v4/letter/a/bbce88/{size}.png","trust_level":2},{"id":14194,"username":"Rwebb","name":"Robert","avatar_template":"/letter_avatar_proxy/v4/letter/r/9fc29f/{size}.png","trust_level":1},{"id":3692,"username":"ttraband","name":"Tom Traband","avatar_template":"/user_avatar/forum.v1e.com/ttraband/{size}/16479_2.png","trust_level":3},{"id":3631,"username":"burbonhillibilly","name":"scott","avatar_template":"/user_avatar/forum.v1e.com/burbonhillibilly/{size}/16260_2.png","trust_level":2},{"id":972,"username":"niget2002","name":"David Walling","avatar_template":"/user_avatar/forum.v1e.com/niget2002/{size}/29757_2.png","trust_level":3},{"id":4207,"username":"bitingmidge","name":"Peter H","avatar_template":"/user_avatar/forum.v1e.com/bitingmidge/{size}/18662_2.png","trust_level":2},{"id":11981,"username":"kausticklown","name":"Tony H","avatar_template":"/user_avatar/forum.v1e.com/kausticklown/{size}/80242_2.png","trust_level":1},{"id":8548,"username":"Dreyfus","name":"","avatar_template":"/user_avatar/forum.v1e.com/dreyfus/{size}/107209_2.png","trust_level":2},{"id":1954,"username":"kd2018","name":"Kyle","avatar_template":"/user_avatar/forum.v1e.com/kd2018/{size}/16730_2.png","trust_level":3},{"id":6768,"username":"stevempotter","name":"Steve M Potter","avatar_template":"/user_avatar/forum.v1e.com/stevempotter/{size}/35614_2.png","trust_level":2},{"id":14268,"username":"DIY_Engineer","name":"DIY Engineer","avatar_template":"/user_avatar/forum.v1e.com/diy_engineer/{size}/108897_2.png","trust_level":2},{"id":10758,"username":"Mark_Kiwi","name":"Mark Kirker","avatar_template":"/user_avatar/forum.v1e.com/mark_kiwi/{size}/56910_2.png","trust_level":2},{"id":10727,"username":"Sharft6","name":"","avatar_template":"/user_avatar/forum.v1e.com/sharft6/{size}/61487_2.png","trust_level":2},{"id":244,"username":"jono035","name":"Jono","avatar_template":"/user_avatar/forum.v1e.com/jono035/{size}/28_2.png","trust_level":3},{"id":5062,"username":"BenMemphis","name":"Ben","avatar_template":"/user_avatar/forum.v1e.com/benmemphis/{size}/108218_2.png","trust_level":2},{"id":13483,"username":"joem","name":"Joe Mc","avatar_template":"/user_avatar/forum.v1e.com/joem/{size}/102903_2.png","trust_level":2},{"id":4556,"username":"nstiesi","name":"Nicholas Stiesi","avatar_template":"/user_avatar/forum.v1e.com/nstiesi/{size}/56221_2.png","trust_level":2},{"id":11231,"username":"bramofon","name":"Waylan Bram","avatar_template":"/letter_avatar_proxy/v4/letter/b/5f8ce5/{size}.png","trust_level":1},{"id":2819,"username":"madebysam","name":"Sam","avatar_template":"/letter_avatar_proxy/v4/letter/m/ea666f/{size}.png","trust_level":2},{"id":8581,"username":"RockinRiley","name":"Riley","avatar_template":"/user_avatar/forum.v1e.com/rockinriley/{size}/52190_2.png","trust_level":3},{"id":5699,"username":"landera","name":"Aaron","avatar_template":"/user_avatar/forum.v1e.com/landera/{size}/84215_2.png","trust_level":1}],"primary_groups":[{"id":41,"name":"patrons"}],"flair_groups":[{"id":41,"name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/mostly-printed-cnc-mpcnc/builds-and-things-built/19?page=1","per_page":30,"top_tags":["gallery-mpcnc","hackaday","plasma"],"topics":[{"fancy_title":"About the Your Builds category","id":3549,"title":"About the Your Builds category","slug":"about-the-your-builds-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2019-11-23T09:16:47.069Z","last_posted_at":null,"bumped":true,"bumped_at":"2019-11-23T09:16:47.076Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"(Replace this first paragraph with a brief description of your new category. This guidance will appear in the category selection area, so try to keep it below 200 characters.) \nUse the following parag…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1550,"like_count":1,"has_summary":false,"last_poster_username":"system","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":null,"last_post_id":3552,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":-1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Success on the first maiden tool path","id":54479,"title":"Success on the first maiden tool path","slug":"success-on-the-first-maiden-tool-path","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/f/cfd08dff036c8fb9e4961fed93a74e1102a25614_2_1024x1024.jpeg","created_at":"2026-07-18T04:56:10.328Z","last_posted_at":"2026-07-18T21:29:07.512Z","bumped":true,"bumped_at":"2026-07-18T21:29:07.512Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":" need to work on cable management / routing, and the pcb needs a protective housing.  Very excited. Me and a classmate of mine we’re able to run the crown path on some foam insulation we ducktaped to…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1920,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/c/f/cfd08dff036c8fb9e4961fed93a74e1102a25614.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/f/cfd08dff036c8fb9e4961fed93a74e1102a25614_2_1024x1024.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/f/cfd08dff036c8fb9e4961fed93a74e1102a25614_2_800x800.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/f/cfd08dff036c8fb9e4961fed93a74e1102a25614_2_400x400.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/f/cfd08dff036c8fb9e4961fed93a74e1102a25614_2_200x200.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/f/cfd08dff036c8fb9e4961fed93a74e1102a25614_2_100x100.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/f/cfd08dff036c8fb9e4961fed93a74e1102a25614_2_50x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":57,"like_count":8,"has_summary":false,"last_poster_username":"MakerJim","category_id":19,"op_like_count":8,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Good to see you’ve got your machine moving! \n\nYou posted this in another thread, to answer that first can you elaborate on what controller you are using?  You can absolutely run the machine without d…","last_post_id":435045,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":13012,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Adding an air blast to a Primo","id":54477,"title":"Adding an air blast to a Primo","slug":"adding-an-air-blast-to-a-primo","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9f8e44f4d977c7980426e178ffaf1e56d5cb54db_2_768x1024.jpeg","created_at":"2026-07-18T01:09:05.331Z","last_posted_at":"2026-07-18T01:09:05.552Z","bumped":true,"bumped_at":"2026-07-18T01:09:05.552Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I don’t see another topic like this so here goes.  My Primo is working great and now I want to cut aluminum.  I decided to add an air blast system and as a bonus it will drip in some alcohol for lubri…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1701,"height":2268,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/f/9f8e44f4d977c7980426e178ffaf1e56d5cb54db.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9f8e44f4d977c7980426e178ffaf1e56d5cb54db_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9f8e44f4d977c7980426e178ffaf1e56d5cb54db_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9f8e44f4d977c7980426e178ffaf1e56d5cb54db_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9f8e44f4d977c7980426e178ffaf1e56d5cb54db_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9f8e44f4d977c7980426e178ffaf1e56d5cb54db_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/f/9f8e44f4d977c7980426e178ffaf1e56d5cb54db_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":40,"like_count":2,"has_summary":false,"last_poster_username":"shopmad","category_id":19,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I don’t see another topic like this so here goes.  My Primo is working great and now I want to cut aluminum.  I decided to add an air blast system and as a bonus it will drip in some alcohol for lubrication and cooling, &hellip;","last_post_id":434997,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14134,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"The Precision Build","id":45454,"title":"The Precision Build","slug":"the-precision-build","posts_count":18,"reply_count":10,"highest_post_number":20,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/6/76391c23e31b1bc12039a756249b205098d8ade9_2_768x1024.jpeg","created_at":"2024-09-30T09:57:55.504Z","last_posted_at":"2026-07-17T15:18:37.493Z","bumped":true,"bumped_at":"2026-07-17T15:18:37.493Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":" \nI will call this machine “Precision”. This is my first build of a CNC and this build has a working area of 305x305mm. I printed the parts on a Bambu Labs X1C with 0.16mm layer height for all parts. …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2560,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/7/6/76391c23e31b1bc12039a756249b205098d8ade9.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/6/76391c23e31b1bc12039a756249b205098d8ade9_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/6/76391c23e31b1bc12039a756249b205098d8ade9_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/6/76391c23e31b1bc12039a756249b205098d8ade9_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/6/76391c23e31b1bc12039a756249b205098d8ade9_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/6/76391c23e31b1bc12039a756249b205098d8ade9_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/7/6/76391c23e31b1bc12039a756249b205098d8ade9_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":664,"like_count":24,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":19,"op_like_count":9,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":109,"green":91,"blue":68},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"97% at least. <img src=\"https://forum.v1e.com/images/emoji/google/face_savoring_food.png?v=15\" title=\":face_savoring_food:\" class=\"emoji\" alt=\":face_savoring_food:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":434981,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10185,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Dewalt Motor Mounts snapped &mdash; suggested fix","id":54441,"title":"Dewalt Motor Mounts snapped --- suggested fix","slug":"dewalt-motor-mounts-snapped-suggested-fix","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/e/ce1ab5de0423f97fd03012a921fc02d3d342a4a3_2_736x1024.jpeg","created_at":"2026-07-11T22:59:43.965Z","last_posted_at":"2026-07-13T18:13:27.326Z","bumped":true,"bumped_at":"2026-07-13T18:13:27.326Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"One day I was about to use my machine when I saw that both parts of my Dewalt 611 tool mounts had snapped.  This is a problem I have had with other 3d printed parts that have to hold tension – they st…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2668,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/c/e/ce1ab5de0423f97fd03012a921fc02d3d342a4a3.jpeg"},{"max_width":1024,"max_height":1024,"width":736,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/e/ce1ab5de0423f97fd03012a921fc02d3d342a4a3_2_736x1024.jpeg"},{"max_width":800,"max_height":800,"width":575,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/e/ce1ab5de0423f97fd03012a921fc02d3d342a4a3_2_575x800.jpeg"},{"max_width":400,"max_height":400,"width":287,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/e/ce1ab5de0423f97fd03012a921fc02d3d342a4a3_2_287x400.jpeg"},{"max_width":200,"max_height":200,"width":143,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/e/ce1ab5de0423f97fd03012a921fc02d3d342a4a3_2_143x200.jpeg"},{"max_width":100,"max_height":100,"width":71,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/e/ce1ab5de0423f97fd03012a921fc02d3d342a4a3_2_71x100.jpeg"},{"max_width":50,"max_height":50,"width":35,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/e/ce1ab5de0423f97fd03012a921fc02d3d342a4a3_2_35x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":81,"like_count":5,"has_summary":false,"last_poster_username":"vincentw56","category_id":19,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I just noticed my top one on mine snapped too. I also have the Dewalt.","last_post_id":434676,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14134,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Printable Cable Chain / Drag Chain improvements","id":8209,"title":"Printable Cable Chain / Drag Chain improvements","slug":"printable-cable-chain-drag-chain-improvements","posts_count":20,"reply_count":1,"highest_post_number":20,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/f/f633794749aaf0e5278df852d631221344f8a09d_2_1024x768.jpeg","created_at":"2018-09-26T07:28:58.000Z","last_posted_at":"2026-06-29T15:04:01.816Z","bumped":true,"bumped_at":"2026-06-29T15:04:01.816Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I redesigned a Thingiverse MPCNC drag chain and gave it several worthwhile improvements. If you intend to print your chains, check it out: https://www.thingiverse.com/thing:3117461 \n  \n  \n ","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":3264,"height":2448,"url":"//us1.dh-cdn.net/uploads/db5587/original/2X/f/f633794749aaf0e5278df852d631221344f8a09d.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/f/f633794749aaf0e5278df852d631221344f8a09d_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/f/f633794749aaf0e5278df852d631221344f8a09d_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/f/f633794749aaf0e5278df852d631221344f8a09d_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/f/f633794749aaf0e5278df852d631221344f8a09d_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/f/f633794749aaf0e5278df852d631221344f8a09d_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/f/f633794749aaf0e5278df852d631221344f8a09d_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":3633,"like_count":7,"has_summary":false,"last_poster_username":"MakerJim","category_id":19,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":86,"green":69,"blue":68},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"You zombie posted in an 8 year old thread.  Not everyone reads old threads. \nYou would be much better served if you create a new forum topic and repeat your questions there, more people will see it a…","last_post_id":433788,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1686,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1292,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":268,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lowrider SKR 1.4 Turbo 2209 build with laser","id":28954,"title":"Lowrider SKR 1.4 Turbo 2209 build with laser","slug":"lowrider-skr-1-4-turbo-2209-build-with-laser","posts_count":13,"reply_count":9,"highest_post_number":13,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/6/e6c4a307337c42d5c39d4ccfeac3fa6702b07048_2_1024x768.jpeg","created_at":"2021-08-25T07:46:13.380Z","last_posted_at":"2026-06-28T01:34:59.821Z","bumped":true,"bumped_at":"2026-06-28T01:34:59.821Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"First of all thanks to Ryan and everybody else making this seem possible <img src=\"https://forum.v1e.com/images/emoji/google/raised_hands.png?v=9\" title=\":raised_hands:\" class=\"emoji\" alt=\":raised_hands:\"> \nI am almost there, it has been a challenging journey, hours of googling and assembly… \nI went for the dual endstop, i hope it…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":3648,"height":2736,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/e/6/e6c4a307337c42d5c39d4ccfeac3fa6702b07048.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/6/e6c4a307337c42d5c39d4ccfeac3fa6702b07048_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/6/e6c4a307337c42d5c39d4ccfeac3fa6702b07048_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/6/e6c4a307337c42d5c39d4ccfeac3fa6702b07048_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/6/e6c4a307337c42d5c39d4ccfeac3fa6702b07048_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/6/e6c4a307337c42d5c39d4ccfeac3fa6702b07048_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/6/e6c4a307337c42d5c39d4ccfeac3fa6702b07048_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":2114,"like_count":6,"has_summary":false,"last_poster_username":"orob","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":108,"green":82,"blue":62},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"You could put a raspberry pi 3 on it and use klipper.  The turbo is a good board.","last_post_id":433717,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6805,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3348,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Project “Tall-Boy”: A Lightweight Hybrid Primo for Precision Milling &amp; Printing","id":54021,"title":"Project “Tall-Boy”: A Lightweight Hybrid Primo for Precision Milling & Printing","slug":"project-tall-boy-a-lightweight-hybrid-primo-for-precision-milling-printing","posts_count":26,"reply_count":19,"highest_post_number":26,"image_url":null,"created_at":"2026-05-09T23:29:40.049Z","last_posted_at":"2026-05-11T14:24:39.663Z","bumped":true,"bumped_at":"2026-05-11T14:24:39.663Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone, \nI’ve been digging deep into the MPCNC Primo build and really absorbing all the work Ryan has put into this project. I’m finally starting my first build, but I wanted to share my plan he…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":308,"like_count":53,"has_summary":false,"last_poster_username":"MakerJim","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"+1 So very true.","last_post_id":430497,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14868,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Spindelkühlung - welches Kühlmittel","id":53855,"title":"Spindelkühlung - welches Kühlmittel","slug":"spindelkuhlung-welches-kuhlmittel","posts_count":12,"reply_count":9,"highest_post_number":12,"image_url":null,"created_at":"2026-04-15T11:32:45.442Z","last_posted_at":"2026-04-15T16:33:19.330Z","bumped":true,"bumped_at":"2026-04-15T16:33:19.330Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Als Spindel kommt bei mir eine 0,8kw Spindel wassergekühlt mit einem FU zum Einsatz. Gefräst wird zu 99% nur Holz. Nun ist die Frage was nehme ich als Kühlmittel? Ich hab schon viele verschiedene Beit…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":87,"like_count":3,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Jo, die kleinen passen schon. Meine ist ja etwas größer:","last_post_id":428248,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":9983,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"MPCNC Primo / Germany / Cologne","id":53656,"title":"MPCNC Primo / Germany / Cologne","slug":"mpcnc-primo-germany-cologne","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_1024x768.jpeg","created_at":"2026-03-21T21:07:06.100Z","last_posted_at":"2026-03-21T22:40:34.178Z","bumped":true,"bumped_at":"2026-03-21T22:40:34.178Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, \nmy name is Markus and I built an MPCNC Primo over the winter. Since today marks my first major success in milling something nice (see below for details), I thought I’d share a few photos of…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_50x37.jpeg"}],"tags":["gallery-mpcnc"],"tags_descriptions":{},"views":335,"like_count":12,"has_summary":false,"last_poster_username":"MakerJim","category_id":19,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Yeah, except one has to specify with/without gas.  Tap water in Germany is good.","last_post_id":426005,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14549,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New Build - Primo Bavaria Germany","id":52407,"title":"New Build - Primo Bavaria Germany","slug":"new-build-primo-bavaria-germany","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_1024x576.jpeg","created_at":"2025-12-14T10:44:03.706Z","last_posted_at":"2026-03-09T08:17:47.498Z","bumped":true,"bumped_at":"2026-03-09T08:17:47.498Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, \nAfter many interruptions, I have now completed the Primo. The first project (my special thanks go to ZenziWerken - Daniel Gross - https://www.zenziwerken.de) was a complete success. M…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1080,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":576,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_1024x576.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":450,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_800x450.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":225,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_400x225.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":112,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_200x112.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":56,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_100x56.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":28,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_50x28.jpeg"}],"tags":[],"tags_descriptions":{},"views":325,"like_count":8,"has_summary":false,"last_poster_username":"Matthias_Schuff","category_id":19,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hallo Wolf1, \nsuper Arbeit! Das sieht sehr gut aus. Kannst du mir vielleicht sagen, welche Halter du für die Schleppketten benutzt hast? Ich finde zwar verschiedene Einzelteile zum Drucken, aber bishe…","last_post_id":424757,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14365,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14247,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14663,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Another MPCNC Primo Dust","id":29527,"title":"Another MPCNC Primo Dust","slug":"another-mpcnc-primo-dust","posts_count":24,"reply_count":13,"highest_post_number":25,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/8/a84b32a803f2e725f63d8421b2ff9dbef7232a7a_2_1024x576.jpeg","created_at":"2021-10-04T16:49:22.054Z","last_posted_at":"2026-03-07T03:56:59.930Z","bumped":true,"bumped_at":"2026-03-07T03:56:59.930Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Another MPCNC Primo Dust Collector \n\n  \n    \n  \n\n  \nI am sharing my version of a dust collection attachment for the MPCNC Primo. I have tried several of the different designs offered and took a stab a…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1280,"height":720,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/a/8/a84b32a803f2e725f63d8421b2ff9dbef7232a7a.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":576,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/8/a84b32a803f2e725f63d8421b2ff9dbef7232a7a_2_1024x576.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":450,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/8/a84b32a803f2e725f63d8421b2ff9dbef7232a7a_2_800x450.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":225,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/8/a84b32a803f2e725f63d8421b2ff9dbef7232a7a_2_400x225.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":112,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/8/a84b32a803f2e725f63d8421b2ff9dbef7232a7a_2_200x112.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":56,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/8/a84b32a803f2e725f63d8421b2ff9dbef7232a7a_2_100x56.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":28,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/8/a84b32a803f2e725f63d8421b2ff9dbef7232a7a_2_50x28.jpeg"}],"tags":[],"tags_descriptions":{},"views":3384,"like_count":22,"has_summary":false,"last_poster_username":"random_dude","category_id":19,"op_like_count":13,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":126,"green":109,"blue":89},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Anyone modified the clamps for the conduits? I tried to file/sand the parts after i printed, but the difference was more than i expected.","last_post_id":424524,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":4130,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7114,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8530,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8649,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14683,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Dummy tool for better air tests","id":52758,"title":"Dummy tool for better air tests","slug":"dummy-tool-for-better-air-tests","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/6/16e43f412e2112789bfbe5f6b96c3892ddb7fe08.jpeg","created_at":"2026-01-10T15:43:44.482Z","last_posted_at":"2026-03-01T03:20:59.709Z","bumped":true,"bumped_at":"2026-03-01T03:20:59.709Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Kind of a simple tool but, as a beginner it helps me a lot.  Since I make a lot of dumb mistakes I like to do air tests before I cut anything. But rather than raising my tool up a a bit and setting Z …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":700,"height":784,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/6/16e43f412e2112789bfbe5f6b96c3892ddb7fe08.jpeg"},{"max_width":400,"max_height":400,"width":357,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/6/16e43f412e2112789bfbe5f6b96c3892ddb7fe08_2_357x400.jpeg"},{"max_width":200,"max_height":200,"width":178,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/6/16e43f412e2112789bfbe5f6b96c3892ddb7fe08_2_178x200.jpeg"},{"max_width":100,"max_height":100,"width":89,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/6/16e43f412e2112789bfbe5f6b96c3892ddb7fe08_2_89x100.jpeg"},{"max_width":50,"max_height":50,"width":44,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/6/16e43f412e2112789bfbe5f6b96c3892ddb7fe08_2_44x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":111,"like_count":9,"has_summary":false,"last_poster_username":"MakerJim","category_id":19,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":87,"green":77,"blue":64},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"We all make dumb mistakes, but that setup is wicked smart. \nI love the use of an easily replaceable Q-tip and copper tape.  Well done!","last_post_id":417987,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14134,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3616,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MPCNC Primo - Italy","id":53265,"title":"MPCNC Primo - Italy","slug":"mpcnc-primo-italy","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/2/a232cd550eec1ecf5414d41345639f3e3c77e803_2_1024x846.jpeg","created_at":"2026-02-13T18:47:06.470Z","last_posted_at":"2026-02-27T20:12:16.201Z","bumped":true,"bumped_at":"2026-02-27T20:12:16.201Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi All, I’ll keep track here of my new build of a MPCNC Primo, it’s my first cnc so it’s fitting as primo translates to first in italian <img src=\"https://forum.v1e.com/images/emoji/google/grinning_face_with_smiling_eyes.png?v=15\" title=\":grinning_face_with_smiling_eyes:\" class=\"emoji\" alt=\":grinning_face_with_smiling_eyes:\" loading=\"lazy\" width=\"20\" height=\"20\"> \nI’m using stainless steel tubing 25mm od 2mm thick. \nWork are…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1431,"height":1183,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/a/2/a232cd550eec1ecf5414d41345639f3e3c77e803.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":846,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/2/a232cd550eec1ecf5414d41345639f3e3c77e803_2_1024x846.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":661,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/2/a232cd550eec1ecf5414d41345639f3e3c77e803_2_800x661.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":330,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/2/a232cd550eec1ecf5414d41345639f3e3c77e803_2_400x330.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":165,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/2/a232cd550eec1ecf5414d41345639f3e3c77e803_2_200x165.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":82,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/2/a232cd550eec1ecf5414d41345639f3e3c77e803_2_100x82.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":41,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/2/a232cd550eec1ecf5414d41345639f3e3c77e803_2_50x41.jpeg"}],"tags":[],"tags_descriptions":{},"views":155,"like_count":12,"has_summary":false,"last_poster_username":"leprehd","category_id":19,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":40,"green":28,"blue":19},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Short update \nGot and mounted the proper leadscrew, nut and coupler. \nConnected all belts even if the machine is not squared yet as I’m planning to finish the base as a torsion box which means I’ll ha…","last_post_id":417837,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14541,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Finish line in Sight on my New MPCNC Primo","id":52903,"title":"Finish line in Sight on my New MPCNC Primo","slug":"finish-line-in-sight-on-my-new-mpcnc-primo","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/697ac4c4627f45bebc1e1fe7ba0a0e26f5dac9ee_2_1024x768.jpeg","created_at":"2026-01-17T22:55:16.232Z","last_posted_at":"2026-02-20T15:10:19.414Z","bumped":true,"bumped_at":"2026-02-20T15:10:19.414Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The finish line is in sight for completing my brand new MPCNC Primo.  Foot spacing is about 83 X 65 cm.  I have the DeWalt 660 router and clamps removed to rotate the lower portion of the router 90 de…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/6/9/697ac4c4627f45bebc1e1fe7ba0a0e26f5dac9ee.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/697ac4c4627f45bebc1e1fe7ba0a0e26f5dac9ee_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/697ac4c4627f45bebc1e1fe7ba0a0e26f5dac9ee_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/697ac4c4627f45bebc1e1fe7ba0a0e26f5dac9ee_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/697ac4c4627f45bebc1e1fe7ba0a0e26f5dac9ee_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/697ac4c4627f45bebc1e1fe7ba0a0e26f5dac9ee_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/9/697ac4c4627f45bebc1e1fe7ba0a0e26f5dac9ee_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":169,"like_count":12,"has_summary":false,"last_poster_username":"Jonathjon","category_id":19,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"There is another pin set up for the touch plate already. It is labeled P on the picture you posted originally","last_post_id":417059,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11745,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14541,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"I knew I&rsquo;d kept the Burly parts for a reason","id":53228,"title":"I knew I'd kept the Burly parts for a reason","slug":"i-knew-id-kept-the-burly-parts-for-a-reason","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/e/befb772f8c339ea3270e028b9bfefad6859eeb8f_2_1024x768.jpeg","created_at":"2026-02-10T09:39:25.659Z","last_posted_at":"2026-02-10T09:39:25.818Z","bumped":true,"bumped_at":"2026-02-10T09:39:25.818Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Needed a quick and dirty router sled and this fit the bill nicely! Not enough room under my Primo to do this. \n ","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1225,"height":919,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/e/befb772f8c339ea3270e028b9bfefad6859eeb8f.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/e/befb772f8c339ea3270e028b9bfefad6859eeb8f_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":799,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/e/befb772f8c339ea3270e028b9bfefad6859eeb8f_2_799x600.jpeg"},{"max_width":400,"max_height":400,"width":399,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/e/befb772f8c339ea3270e028b9bfefad6859eeb8f_2_399x300.jpeg"},{"max_width":200,"max_height":200,"width":199,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/e/befb772f8c339ea3270e028b9bfefad6859eeb8f_2_199x150.jpeg"},{"max_width":100,"max_height":100,"width":99,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/e/befb772f8c339ea3270e028b9bfefad6859eeb8f_2_99x75.jpeg"},{"max_width":50,"max_height":50,"width":49,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/e/befb772f8c339ea3270e028b9bfefad6859eeb8f_2_49x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":108,"like_count":9,"has_summary":false,"last_poster_username":"robrevens","category_id":19,"op_like_count":9,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":83,"green":74,"blue":61},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Needed a quick and dirty router sled and this fit the bill nicely! Not enough room under my Primo to do this.","last_post_id":415615,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":3958,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Apparent Stepper Misbehavior when Using Servo","id":52994,"title":"Apparent Stepper Misbehavior when Using Servo","slug":"apparent-stepper-misbehavior-when-using-servo","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2026-01-23T02:38:42.840Z","last_posted_at":"2026-01-24T04:08:06.475Z","bumped":true,"bumped_at":"2026-01-24T04:08:06.475Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"tl;dr. My X or Y axis shifts slightly the first time I actuate the servo controlling the Z axis after a move. \nI hesitate to post this here because what I’m running no longer bears any resemblance to …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":80,"like_count":7,"has_summary":false,"last_poster_username":"jrlallo","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"It works fine now. I dug up a 5v regulator from my parts box and wired it into the 12v input. Running that 5v power directly to the servo did the job. It drew a dragon. \n ","last_post_id":412728,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":594,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"End stops breaking &ndash; but I have a fix","id":52673,"title":"End stops breaking -- but I have a fix","slug":"end-stops-breaking-but-i-have-a-fix","posts_count":10,"reply_count":4,"highest_post_number":10,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/a/4/a48d1f2d5d8ebac8532097f04eaddbc1d8fb7579.jpeg","created_at":"2026-01-04T23:06:40.719Z","last_posted_at":"2026-01-05T17:58:43.790Z","bumped":true,"bumped_at":"2026-01-05T17:58:43.790Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Today went to use my Primo and found that 3 of the four stops for the dual end stop system had broken (see photo).  That is, the little clamps that the limit switches hit.  This seems to be the most f…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":700,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/a/4/a48d1f2d5d8ebac8532097f04eaddbc1d8fb7579.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":342,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/4/a48d1f2d5d8ebac8532097f04eaddbc1d8fb7579_2_400x342.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":171,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/4/a48d1f2d5d8ebac8532097f04eaddbc1d8fb7579_2_200x171.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":85,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/4/a48d1f2d5d8ebac8532097f04eaddbc1d8fb7579_2_100x85.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":42,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/4/a48d1f2d5d8ebac8532097f04eaddbc1d8fb7579_2_50x42.jpeg"}],"tags":[],"tags_descriptions":{},"views":161,"like_count":19,"has_summary":false,"last_poster_username":"shopmad","category_id":19,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":48,"green":41,"blue":39},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"No I did not see it as taking anything away.  It’s good to have alternatives. PETG will probably work for most people.  The comment about garages is also true.  I live in southern AZ and my garage can…","last_post_id":409852,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14134,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4859,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Total newbie with new to me primo MPCNC project","id":37088,"title":"Total newbie with new to me primo MPCNC project","slug":"total-newbie-with-new-to-me-primo-mpcnc-project","posts_count":32,"reply_count":19,"highest_post_number":32,"image_url":null,"created_at":"2023-03-04T15:49:31.551Z","last_posted_at":"2026-03-03T21:29:57.648Z","bumped":true,"bumped_at":"2025-12-29T17:09:53.396Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am brand new to this so looking forward to learning from all of you experts out there. The only other thing that I have played with is a small 3018 CNC that I made a few signs on. I bought a mostly …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1511,"like_count":27,"has_summary":false,"last_poster_username":"vicious1","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"close older topics to help with spambots, and faster new user questions.","last_post_id":422798,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10383,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1888,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Primo upgrade - Tromsø, Norway","id":14113,"title":"Primo upgrade - Tromsø, Norway","slug":"primo-upgrade-tromso-norway","posts_count":490,"reply_count":304,"highest_post_number":494,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/3/c3a2cd35e5d16601653da4d8b5d09fae0a0c42da_2_484x1024.jpeg","created_at":"2020-01-10T21:40:01.918Z","last_posted_at":"2025-12-22T15:26:24.370Z","bumped":true,"bumped_at":"2025-12-22T15:26:24.370Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"After half a year I’ve finally drawn my first crown!! \n \nI’ve had soooo many worries, issues and questions these months. I don’t have a technical backgroun, so the learning curve has been steep, at so…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1908,"height":4032,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/c/3/c3a2cd35e5d16601653da4d8b5d09fae0a0c42da.jpeg"},{"max_width":1024,"max_height":1024,"width":484,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/3/c3a2cd35e5d16601653da4d8b5d09fae0a0c42da_2_484x1024.jpeg"},{"max_width":800,"max_height":800,"width":378,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/3/c3a2cd35e5d16601653da4d8b5d09fae0a0c42da_2_378x800.jpeg"},{"max_width":400,"max_height":400,"width":189,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/3/c3a2cd35e5d16601653da4d8b5d09fae0a0c42da_2_189x400.jpeg"},{"max_width":200,"max_height":200,"width":94,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/3/c3a2cd35e5d16601653da4d8b5d09fae0a0c42da_2_94x200.jpeg"},{"max_width":100,"max_height":100,"width":47,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/3/c3a2cd35e5d16601653da4d8b5d09fae0a0c42da_2_47x100.jpeg"},{"max_width":50,"max_height":50,"width":23,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/3/c3a2cd35e5d16601653da4d8b5d09fae0a0c42da_2_23x50.jpeg"}],"tags":["gallery-mpcnc"],"tags_descriptions":{},"views":19377,"like_count":975,"has_summary":true,"last_poster_username":"vicious1","category_id":19,"op_like_count":10,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":127,"green":101,"blue":68},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"We are a group of like-minded individuals, yelling at us is unfair of you. \nYou do not know who we voted for, The vote has divided our country in half. Half are very happy right now, and half feel as …","last_post_id":407761,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2798,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4429,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":268,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Finally jumped back in&hellip; MPCNC Burly to Primo","id":52032,"title":"Finally jumped back in... MPCNC Burly to Primo","slug":"finally-jumped-back-in-mpcnc-burly-to-primo","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/f/e/fee4c8e2db5fe89d8fff71122c4fbb297e528254_2_1024x768.jpeg","created_at":"2025-11-18T05:51:22.349Z","last_posted_at":"2025-12-21T19:13:37.093Z","bumped":true,"bumped_at":"2025-12-21T19:13:37.093Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey All… Been a few years! Just thought I’d throw up a couple of pics of my recently (Past week) upgraded MPCNC Primo. I reused most of the rails, the steppers, and the Archim 1.0 controller, but that…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/f/e/fee4c8e2db5fe89d8fff71122c4fbb297e528254.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/f/e/fee4c8e2db5fe89d8fff71122c4fbb297e528254_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/f/e/fee4c8e2db5fe89d8fff71122c4fbb297e528254_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/f/e/fee4c8e2db5fe89d8fff71122c4fbb297e528254_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/f/e/fee4c8e2db5fe89d8fff71122c4fbb297e528254_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/f/e/fee4c8e2db5fe89d8fff71122c4fbb297e528254_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/f/e/fee4c8e2db5fe89d8fff71122c4fbb297e528254_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":186,"like_count":12,"has_summary":false,"last_poster_username":"azron","category_id":19,"op_like_count":8,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Finally finished and got the CYD Pendant working. Very happy with how it turned out. Its amazing to me how much \"DIY” stuff has changed over the past decade. DIY used to look like DIY, cobbled togethe…","last_post_id":407652,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2293,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Just finished my first g-code operation","id":52210,"title":"Just finished my first g-code operation","slug":"just-finished-my-first-g-code-operation","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/6/b6648611e8544fc3930843bb8bd7d03c2a9e4c6e.jpeg","created_at":"2025-12-02T05:30:12.738Z","last_posted_at":"2025-12-05T13:01:34.481Z","bumped":true,"bumped_at":"2025-12-05T13:01:34.481Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"First post newb here.   \n I am still putting the finishing touches on the setup, I’m having a hard time figuring out how to fix my squaring of the core. I drew a box around my work area while jogging …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":640,"height":464,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/6/b6648611e8544fc3930843bb8bd7d03c2a9e4c6e.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":290,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b6648611e8544fc3930843bb8bd7d03c2a9e4c6e_2_400x290.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":145,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b6648611e8544fc3930843bb8bd7d03c2a9e4c6e_2_200x145.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":72,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b6648611e8544fc3930843bb8bd7d03c2a9e4c6e_2_100x72.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":36,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b6648611e8544fc3930843bb8bd7d03c2a9e4c6e_2_50x36.jpeg"}],"tags":[],"tags_descriptions":{},"views":135,"like_count":10,"has_summary":false,"last_poster_username":"jeffeb3","category_id":19,"op_like_count":8,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":49,"green":47,"blue":44},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Trapezoids shouldn’t be possible since there is a motor driving on each side. \nThe motors on either end are the same. The pulleys are the same. So the belts may be to blame. Make sure they have about…","last_post_id":404798,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14194,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Started with zero knowledge - Today I cut!","id":15107,"title":"Started with zero knowledge - Today I cut!","slug":"started-with-zero-knowledge-today-i-cut","posts_count":13,"reply_count":4,"highest_post_number":13,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/0/8060721ed9c12a2e6b86724ef116140d1510d421_2_1024x768.jpeg","created_at":"2020-02-16T00:28:06.028Z","last_posted_at":"2025-12-02T12:08:20.457Z","bumped":true,"bumped_at":"2025-12-02T12:17:48.102Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Four months ago a friend said to me – I’m making my own CNC… \nI was blown away.  As a new metal hobbiest, I wanted a plasma CNC. \nI started my journey.  I didn’t know a thing about 3D printing, but bo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":4032,"height":3024,"url":"//us1.dh-cdn.net/uploads/db5587/original/3X/8/0/8060721ed9c12a2e6b86724ef116140d1510d421.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/0/8060721ed9c12a2e6b86724ef116140d1510d421_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/0/8060721ed9c12a2e6b86724ef116140d1510d421_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/0/8060721ed9c12a2e6b86724ef116140d1510d421_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/0/8060721ed9c12a2e6b86724ef116140d1510d421_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/0/8060721ed9c12a2e6b86724ef116140d1510d421_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/8/0/8060721ed9c12a2e6b86724ef116140d1510d421_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":1345,"like_count":66,"has_summary":false,"last_poster_username":"bitingmidge","category_id":19,"op_like_count":19,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":87,"green":64,"blue":54},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"… and even after all this time I still get suckered into commenting on a five  <img src=\"https://forum.v1e.com/images/emoji/google/blush.png?v=14\" title=\":blush:\" class=\"emoji\" alt=\":blush:\" loading=\"lazy\" width=\"20\" height=\"20\"> year old thread!   Has anyone seen my glasses?","last_post_id":404351,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":3631,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2798,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":972,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4207,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"My OK, USA MPCNC Build","id":51687,"title":"My OK, USA MPCNC Build","slug":"my-ok-usa-mpcnc-build","posts_count":11,"reply_count":7,"highest_post_number":11,"image_url":null,"created_at":"2025-10-25T23:05:48.995Z","last_posted_at":"2025-12-01T21:16:36.999Z","bumped":true,"bumped_at":"2025-12-01T21:16:36.999Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Well, it’s been a long time coming. Let me preface my story with that I went with a phased approach to this. I started my build in the Winter of 2023. Fast forward to now, I’m still working on things …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":291,"like_count":19,"has_summary":false,"last_poster_username":"kausticklown","category_id":19,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I’m wanting to make some signs for my wife. She’s a teacher and would like a customer sign for her and her partner teacher. Should be an easy to start with project, I just need to find the time to com…","last_post_id":404265,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":11981,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8548,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1954,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Featuring my Portable Primo at Dublin Maker this weekend!","id":28003,"title":"Featuring my Portable Primo at Dublin Maker this weekend!","slug":"featuring-my-portable-primo-at-dublin-maker-this-weekend","posts_count":20,"reply_count":12,"highest_post_number":20,"image_url":null,"created_at":"2021-06-16T20:16:08.962Z","last_posted_at":"2025-11-23T20:33:37.166Z","bumped":true,"bumped_at":"2025-11-23T20:33:37.166Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I will have an online “virtual booth” (M42 in Zone 7) at this year’s Dublin Maker fair, where I can meet makers and answer questions about my transportable MPCNC build.  I made a video for the booth –…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":544,"like_count":26,"has_summary":false,"last_poster_username":"DIY_Engineer","category_id":19,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thanks for the info guys! \nPlanning to get my toes wet with the mpcnc - I will start reducing the conduit size until I find the sweet-spot. LowRider will be the next project!","last_post_id":403472,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":6768,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2798,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8548,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14268,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New Build - Primo - New Zealand","id":38494,"title":"New Build - Primo - New Zealand","slug":"new-build-primo-new-zealand","posts_count":67,"reply_count":37,"highest_post_number":67,"image_url":null,"created_at":"2023-06-04T07:01:31.401Z","last_posted_at":"2026-03-03T14:30:50.899Z","bumped":true,"bumped_at":"2025-11-10T08:26:04.579Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I first got interested in the idea of building a CNC probably 9 or 10 years ago when I first came across https://buildyourcnc.com/ on the internet… but it never progressed much beyond that. Since then…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":2341,"like_count":69,"has_summary":true,"last_poster_username":"vicious1","category_id":19,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"closing old topic to help fight spambots","last_post_id":419602,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10758,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10727,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":244,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"2.2kw spindle, what spoilboard to use?","id":51795,"title":"2.2kw spindle, what spoilboard to use?","slug":"2-2kw-spindle-what-spoilboard-to-use","posts_count":7,"reply_count":4,"highest_post_number":7,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/b/ab1f1760d0765043dc34c1dcf557745c8795aa16_2_1024x768.jpeg","created_at":"2025-11-02T18:16:39.501Z","last_posted_at":"2025-11-05T01:10:55.594Z","bumped":true,"bumped_at":"2025-11-05T01:10:55.594Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Using jackpot v2 board but want to know what to use for a spoil board. What do you guys rec ommend? \n ","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/a/b/ab1f1760d0765043dc34c1dcf557745c8795aa16.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/b/ab1f1760d0765043dc34c1dcf557745c8795aa16_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/b/ab1f1760d0765043dc34c1dcf557745c8795aa16_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/b/ab1f1760d0765043dc34c1dcf557745c8795aa16_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/b/ab1f1760d0765043dc34c1dcf557745c8795aa16_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/b/ab1f1760d0765043dc34c1dcf557745c8795aa16_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/a/b/ab1f1760d0765043dc34c1dcf557745c8795aa16_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":190,"like_count":3,"has_summary":false,"last_poster_username":"BenMemphis","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Cool, I think I’m going to use a full blown dust collector on it.","last_post_id":400673,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":5062,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13483,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4556,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Dustybun upgrade (MPCNC)","id":51576,"title":"Dustybun upgrade (MPCNC)","slug":"dustybun-upgrade-mpcnc","posts_count":7,"reply_count":4,"highest_post_number":7,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/4/6419f946975fd05be01fcfaff9ae5e9ded08531f_2_768x1024.jpeg","created_at":"2025-10-19T12:04:18.384Z","last_posted_at":"2025-10-23T11:35:55.300Z","bumped":true,"bumped_at":"2025-10-23T11:35:55.300Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I decided to increase the cutting area on my machine to be able to go 30”x30” (762mm). Finally got it done enough for the testing. I think it’s working quite well! \n  \n  \n ","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2560,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/6/4/6419f946975fd05be01fcfaff9ae5e9ded08531f.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/4/6419f946975fd05be01fcfaff9ae5e9ded08531f_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/4/6419f946975fd05be01fcfaff9ae5e9ded08531f_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/4/6419f946975fd05be01fcfaff9ae5e9ded08531f_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/4/6419f946975fd05be01fcfaff9ae5e9ded08531f_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/4/6419f946975fd05be01fcfaff9ae5e9ded08531f_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/4/6419f946975fd05be01fcfaff9ae5e9ded08531f_2_37x50.jpeg"}],"tags":["gallery-mpcnc"],"tags_descriptions":{},"views":309,"like_count":12,"has_summary":false,"last_poster_username":"bramofon","category_id":19,"op_like_count":8,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I think the model was from 3axis.co.","last_post_id":399225,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":11231,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10185,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13483,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Rebuilding my Burly from 2019! May 2024 (London, UK)","id":43968,"title":"Rebuilding my Burly from 2019! May 2024 (London, UK)","slug":"rebuilding-my-burly-from-2019-may-2024-london-uk","posts_count":17,"reply_count":8,"highest_post_number":17,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/b/1bf2a170e65319ac08b8c80d068406aa3ef0dc08_2_1024x768.jpeg","created_at":"2024-05-26T16:26:08.942Z","last_posted_at":"2026-03-03T21:10:37.216Z","bumped":true,"bumped_at":"2025-10-14T19:03:47.471Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve dusted off my old MPCNC to take it into 2024. \nWhat you see below are the original parts from my first burly MPCNC. A few months ago they were all in a cardboard box broken down. I got some tube …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/b/1bf2a170e65319ac08b8c80d068406aa3ef0dc08.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/b/1bf2a170e65319ac08b8c80d068406aa3ef0dc08_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/b/1bf2a170e65319ac08b8c80d068406aa3ef0dc08_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/b/1bf2a170e65319ac08b8c80d068406aa3ef0dc08_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/b/1bf2a170e65319ac08b8c80d068406aa3ef0dc08_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/b/1bf2a170e65319ac08b8c80d068406aa3ef0dc08_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/b/1bf2a170e65319ac08b8c80d068406aa3ef0dc08_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":406,"like_count":22,"has_summary":false,"last_poster_username":"vicious1","category_id":19,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":95,"green":86,"blue":74},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Closing old topics to limit spambots","last_post_id":421443,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2819,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8581,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MPCNC for sale - Oklahoma","id":51435,"title":"MPCNC for sale - Oklahoma","slug":"mpcnc-for-sale-oklahoma","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2025-10-07T16:27:19.618Z","last_posted_at":"2025-10-07T16:27:19.746Z","bumped":true,"bumped_at":"2025-10-07T16:27:19.746Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am looking to sell my MPCNC if anyone is interested in it.  I printed the parts myself and bought the hardware kit from here. Would include metal rails as well.  Unfortunately I have not had time ov…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":111,"like_count":0,"has_summary":false,"last_poster_username":"landera","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I am looking to sell my MPCNC if anyone is interested in it.  I printed the parts myself and bought the hardware kit from here. Would include metal rails as well.  Unfortunately I have not had time over the past few year&hellip;","last_post_id":397139,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":5699,"primary_group_id":null,"flair_group_id":null}]}]}}