{"users":[{"id":-1,"username":"system","name":"system","avatar_template":"//us1.dh-cdn.net/uploads/db5587/original/2X/8/80a6ba28d95c089e3a0b7432139a26faa946cd84.png","admin":true,"moderator":true,"trust_level":4},{"id":10544,"username":"Pankr036","name":"Britton m Pankratz","avatar_template":"/user_avatar/forum.v1e.com/pankr036/{size}/60628_2.png","trust_level":1},{"id":11259,"username":"jeyeager","name":"Jason Yeager","avatar_template":"/user_avatar/forum.v1e.com/jeyeager/{size}/71643_2.png","trust_level":3},{"id":585,"username":"chamblis","name":"William Adams","avatar_template":"/letter_avatar_proxy/v4/letter/c/919ad9/{size}.png","trust_level":2},{"id":7286,"username":"Britt","name":"Britt Percival","avatar_template":"/user_avatar/forum.v1e.com/britt/{size}/62440_2.png","trust_level":3},{"id":2052,"username":"christianovitch","name":"Christian","avatar_template":"/user_avatar/forum.v1e.com/christianovitch/{size}/57676_2.png","trust_level":1},{"id":5226,"username":"Tokoloshe","name":"Philipp","avatar_template":"/user_avatar/forum.v1e.com/tokoloshe/{size}/26379_2.png","primary_group_name":"patrons","trust_level":3},{"id":9253,"username":"MakerJim","name":"","avatar_template":"/user_avatar/forum.v1e.com/makerjim/{size}/87766_2.png","trust_level":3},{"id":1108,"username":"timonjkl","name":"Tim W","avatar_template":"/user_avatar/forum.v1e.com/timonjkl/{size}/111103_2.png","trust_level":3},{"id":10790,"username":"Ursidae","name":"","avatar_template":"/user_avatar/forum.v1e.com/ursidae/{size}/62094_2.png","trust_level":1},{"id":8782,"username":"orob","name":"","avatar_template":"/user_avatar/forum.v1e.com/orob/{size}/62644_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":2,"username":"vicious1","name":"Ryan","avatar_template":"/user_avatar/forum.v1e.com/vicious1/{size}/104426_2.png","admin":true,"moderator":true,"trust_level":4},{"id":10626,"username":"jonsar13","name":"Jonsar13","avatar_template":"/user_avatar/forum.v1e.com/jonsar13/{size}/60440_2.png","trust_level":2},{"id":7147,"username":"DougJoseph","name":"Doug Joseph (design8studio)","avatar_template":"/user_avatar/forum.v1e.com/dougjoseph/{size}/34670_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":5875,"username":"mbamberg","name":"Mike Bamberg","avatar_template":"/user_avatar/forum.v1e.com/mbamberg/{size}/62423_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":2},{"id":8437,"username":"Carlos","name":"Carl","avatar_template":"/user_avatar/forum.v1e.com/carlos/{size}/56948_2.png","trust_level":2},{"id":3692,"username":"ttraband","name":"Tom Traband","avatar_template":"/user_avatar/forum.v1e.com/ttraband/{size}/16479_2.png","trust_level":3},{"id":1620,"username":"snoozedoggydog","name":"Phil Haddon","avatar_template":"/letter_avatar_proxy/v4/letter/s/d07c76/{size}.png","trust_level":1},{"id":1621,"username":"antoinedellieu","name":"Antoine","avatar_template":"/letter_avatar_proxy/v4/letter/a/5f9b8f/{size}.png","trust_level":1},{"id":4935,"username":"Melcour","name":"Melcour","avatar_template":"/letter_avatar_proxy/v4/letter/m/eb9ed0/{size}.png","trust_level":2},{"id":12027,"username":"MohnJadden","name":"","avatar_template":"/user_avatar/forum.v1e.com/mohnjadden/{size}/81032_2.png","trust_level":1},{"id":4103,"username":"Jonathjon","name":"Jonathan Jones","avatar_template":"/user_avatar/forum.v1e.com/jonathjon/{size}/70532_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":1683,"username":"kc7air","name":"Patrick McVey","avatar_template":"/user_avatar/forum.v1e.com/kc7air/{size}/35048_2.png","trust_level":2},{"id":10827,"username":"Bartman","name":"","avatar_template":"/user_avatar/forum.v1e.com/bartman/{size}/63661_2.png","trust_level":3},{"id":2236,"username":"jamiek","name":"Jamie","avatar_template":"/user_avatar/forum.v1e.com/jamiek/{size}/104441_2.png","trust_level":2},{"id":2207,"username":"twolf","name":"Tim","avatar_template":"/letter_avatar_proxy/v4/letter/t/f1d935/{size}.png","trust_level":2},{"id":2828,"username":"peter","name":"Peter","avatar_template":"/letter_avatar_proxy/v4/letter/p/278dde/{size}.png","trust_level":2},{"id":14868,"username":"RebornBeat","name":"RebornBeat","avatar_template":"/user_avatar/forum.v1e.com/rebornbeat/{size}/116275_2.png","trust_level":1},{"id":9983,"username":"Michael2501","name":"","avatar_template":"/user_avatar/forum.v1e.com/michael2501/{size}/54269_2.png","trust_level":1},{"id":1137,"username":"am0254338","name":"Andy M.","avatar_template":"/letter_avatar_proxy/v4/letter/a/e47c2d/{size}.png","trust_level":1},{"id":748,"username":"forcerouge","name":"Roger","avatar_template":"/user_avatar/forum.v1e.com/forcerouge/{size}/15977_2.png","trust_level":2},{"id":353,"username":"jeffeb3","name":"Jeffeb3","avatar_template":"/user_avatar/forum.v1e.com/jeffeb3/{size}/91905_2.png","trust_level":4},{"id":1093,"username":"dustmaker","name":"John","avatar_template":"/letter_avatar_proxy/v4/letter/d/dec6dc/{size}.png","trust_level":1},{"id":14308,"username":"NoTrebel","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/n/e95f7d/{size}.png","trust_level":1},{"id":1333,"username":"mars72","name":"Marshall","avatar_template":"/user_avatar/forum.v1e.com/mars72/{size}/71878_2.png","trust_level":2},{"id":268,"username":"barry99705","name":"Barry","avatar_template":"/user_avatar/forum.v1e.com/barry99705/{size}/15876_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14814,"username":"Frank_Baker","name":"Frank Baker","avatar_template":"/user_avatar/forum.v1e.com/frank_baker/{size}/115590_2.png","trust_level":1},{"id":2373,"username":"dwkisker","name":"Dave K","avatar_template":"/user_avatar/forum.v1e.com/dwkisker/{size}/92548_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":14542,"username":"Tylas","name":"Ty","avatar_template":"/user_avatar/forum.v1e.com/tylas/{size}/113153_2.png","trust_level":3},{"id":12439,"username":"lwnemesis","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/l/bbe5ce/{size}.png","trust_level":1},{"id":14729,"username":"Bill1","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/b/a8b319/{size}.png","trust_level":1},{"id":4040,"username":"laurence","name":"Noirault","avatar_template":"/letter_avatar_proxy/v4/letter/l/5fc32e/{size}.png","trust_level":1},{"id":12736,"username":"k_dub","name":"Kevin Engelstad","avatar_template":"/letter_avatar_proxy/v4/letter/k/b5e925/{size}.png","trust_level":1},{"id":14549,"username":"Markus_D","name":"Markus D.","avatar_template":"/user_avatar/forum.v1e.com/markus_d/{size}/114567_2.png","trust_level":1},{"id":2201,"username":"tlumppy","name":"Tim","avatar_template":"/letter_avatar_proxy/v4/letter/t/59ef9b/{size}.png","trust_level":2},{"id":972,"username":"niget2002","name":"David Walling","avatar_template":"/user_avatar/forum.v1e.com/niget2002/{size}/29757_2.png","trust_level":3},{"id":14663,"username":"Matthias_Schuff","name":"Matthias Schuff","avatar_template":"/user_avatar/forum.v1e.com/matthias_schuff/{size}/113805_2.png","trust_level":1},{"id":14365,"username":"Wolf1","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/w/8e8cbc/{size}.png","trust_level":1},{"id":14247,"username":"Vasily","name":"Vasily aus Wien","avatar_template":"/user_avatar/forum.v1e.com/vasily/{size}/108571_2.png","trust_level":2},{"id":1169,"username":"jbskone","name":"joe","avatar_template":"/user_avatar/forum.v1e.com/jbskone/{size}/24769_2.png","trust_level":1},{"id":5647,"username":"SupraGuy","name":"Dan","avatar_template":"/user_avatar/forum.v1e.com/supraguy/{size}/37950_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3}],"primary_groups":[{"id":41,"name":"patrons"}],"flair_groups":[{"id":41,"name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/mostly-printed-cnc-mpcnc/9?page=1","per_page":30,"top_tags":["gallery-mpcnc","laser","hackaday","plasma","sandify"],"topics":[{"fancy_title":"About the Mostly Printed CNC - MPCNC category","id":3539,"title":"About the Mostly Printed CNC - MPCNC category","slug":"about-the-mostly-printed-cnc-mpcnc-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2019-11-23T09:16:46.431Z","last_posted_at":null,"bumped":true,"bumped_at":"2019-11-23T09:16:46.440Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"(Replace this first paragraph with a brief description of your new category. This guidance will appear in the category selection area, so try to keep it below 200 characters.) \nUse the following parag…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":7363,"like_count":2,"has_summary":false,"last_poster_username":"system","category_id":9,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":null,"last_post_id":3542,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":-1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MPCNC Primo SD Card Contents and .yaml file issues","id":53773,"title":"MPCNC Primo SD Card Contents and .yaml file issues","slug":"mpcnc-primo-sd-card-contents-and-yaml-file-issues","posts_count":7,"reply_count":4,"highest_post_number":7,"image_url":null,"created_at":"2026-04-04T02:48:55.914Z","last_posted_at":"2026-06-08T18:50:20.688Z","bumped":true,"bumped_at":"2026-06-08T18:50:20.688Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey guys! I ordered a Jackpot 3 board directly from the V1E website and it came with the firmware for a Lowrider flashed on it instead. I did a lot of looking around and thought I got it right, but no…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":100,"like_count":3,"has_summary":false,"last_poster_username":"Britt","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"No it won’t. Download and install the config for the MPCNC from here: \n\n\nYou are going to really like the Jackpot board. When I got mine I added the endstops to the MPCNC.","last_post_id":432512,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10544,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":585,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Carving turned into drilling&hellip;. :frowning:","id":54191,"title":"Carving turned into drilling.... :(","slug":"carving-turned-into-drilling","posts_count":9,"reply_count":5,"highest_post_number":9,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/8/18495e917562831efd3d1565012d78ad99c4c803_2_1024x768.jpeg","created_at":"2026-06-01T01:45:24.819Z","last_posted_at":"2026-06-08T00:22:21.069Z","bumped":true,"bumped_at":"2026-06-08T00:22:21.069Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just smoked an $80 block of maple doing a 3D relief map of a local trail.  I have no idea what happened–curious to hear if anyone has any ideas.  The workpiece was 13” square, 3” thick.  All prep wo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/1/8/18495e917562831efd3d1565012d78ad99c4c803.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/8/18495e917562831efd3d1565012d78ad99c4c803_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/8/18495e917562831efd3d1565012d78ad99c4c803_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/8/18495e917562831efd3d1565012d78ad99c4c803_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/8/18495e917562831efd3d1565012d78ad99c4c803_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/8/18495e917562831efd3d1565012d78ad99c4c803_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/1/8/18495e917562831efd3d1565012d78ad99c4c803_2_50x37.jpeg"}],"tags":[],"tags_descriptions":{},"views":194,"like_count":9,"has_summary":false,"last_poster_username":"timonjkl","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"quote=\"MakerJim, post:6, topic:54191\"\n\nA power glitch is a credible scenario, but most grid tied PV inverters don’t produce transients that would cause this. I wouldn’t rule out a power gltch, though …","last_post_id":432476,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2052,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1108,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Molten dupont connectors","id":54232,"title":"Molten dupont connectors","slug":"molten-dupont-connectors","posts_count":13,"reply_count":7,"highest_post_number":13,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_576x1024.jpeg","created_at":"2026-06-05T15:09:22.044Z","last_posted_at":"2026-06-07T07:52:59.914Z","bumped":true,"bumped_at":"2026-06-07T07:52:59.914Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey there today i turned on the machine and the x axis was jamming so i checked the wiring. \nI got a Primo with the SKR Pro 1.2 and this housing with DP 15/25 connectors: \nhttps://www.thingiverse.com/…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":900,"height":1600,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8.jpeg"},{"max_width":1024,"max_height":1024,"width":576,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_576x1024.jpeg"},{"max_width":800,"max_height":800,"width":450,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_450x800.jpeg"},{"max_width":400,"max_height":400,"width":225,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_225x400.jpeg"},{"max_width":200,"max_height":200,"width":112,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_112x200.jpeg"},{"max_width":100,"max_height":100,"width":56,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_56x100.jpeg"},{"max_width":50,"max_height":50,"width":28,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/0/902745a226578e13448c7b06ca1469e91edda8c8_2_28x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":154,"like_count":9,"has_summary":false,"last_poster_username":"jonsar13","category_id":22,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":78,"green":77,"blue":69},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"be interested in seeing the the other end of the connector because its been very hot aswell","last_post_id":432468,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10790,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10626,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"&ldquo;Crazy&rdquo; idea: paper cutter carcass as base for small CNC","id":54182,"title":"\"Crazy\" idea: paper cutter carcass as base for small CNC","slug":"crazy-idea-paper-cutter-carcass-as-base-for-small-cnc","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2026-05-29T23:14:13.576Z","last_posted_at":"2026-05-30T04:37:03.959Z","bumped":true,"bumped_at":"2026-05-30T04:37:03.959Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"We had an Xacto brand paper cutter, 15\" x 15\" and it recently got a bad gouge in its bed knife, made by the cutting blade, during normal but somewhat heavy duty use. The manufacturer does not sell par…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":105,"like_count":1,"has_summary":false,"last_poster_username":"DougJoseph","category_id":20,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Excellent idea. But I’m also laser poor. I have huge 100w CO2 laser, and two or three good sized diode lasers, one quite powerful. Plus the galvo laser marker. I pretty much never need those diodes.","last_post_id":431953,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":7147,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":5875,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Router is shifting the deeper it goes","id":54157,"title":"Router is shifting the deeper it goes","slug":"router-is-shifting-the-deeper-it-goes","posts_count":11,"reply_count":6,"highest_post_number":11,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/c/0ccb9f49395f4b75f78815be978e89296d099550_2_768x1024.jpeg","created_at":"2026-05-26T14:19:47.021Z","last_posted_at":"2026-05-27T16:16:01.207Z","bumped":true,"bumped_at":"2026-05-27T16:16:01.207Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":" \nThis is a job I regularly run on guitar bodies without any issues - same Estlcam file every time. But the last two jobs/runs have ended up leaving uncut ridges which get worse the deeper the Z axis…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2560,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/0/c/0ccb9f49395f4b75f78815be978e89296d099550.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/c/0ccb9f49395f4b75f78815be978e89296d099550_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/c/0ccb9f49395f4b75f78815be978e89296d099550_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/c/0ccb9f49395f4b75f78815be978e89296d099550_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/c/0ccb9f49395f4b75f78815be978e89296d099550_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/c/0ccb9f49395f4b75f78815be978e89296d099550_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/c/0ccb9f49395f4b75f78815be978e89296d099550_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":123,"like_count":15,"has_summary":false,"last_poster_username":"ttraband","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Sounds like an opportunity for lightweight thread locker.","last_post_id":431697,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":8437,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"UK import tax on a full kit","id":7612,"title":"UK import tax on a full kit","slug":"uk-import-tax-on-a-full-kit","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":null,"created_at":"2018-06-17T00:51:04.000Z","last_posted_at":"2026-05-21T18:33:51.481Z","bumped":true,"bumped_at":"2026-05-21T18:33:51.481Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi \nI was considering buying a mpcnc kit. \n1: To give something back to the developer. \n2: time effort and specification checking. \nBut is there anyone on here that’s from the UK and got hit with impo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":454,"like_count":2,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Definitely. The current kits are plug and play basically, with a little Lego for grownups in between. <img src=\"https://forum.v1e.com/images/emoji/google/grinning_face_with_smiling_eyes.png?v=15\" title=\":grinning_face_with_smiling_eyes:\" class=\"emoji\" alt=\":grinning_face_with_smiling_eyes:\" loading=\"lazy\" width=\"20\" height=\"20\"> \nThe UK is in a shitty position because taxes from the EU are basically the same…","last_post_id":431329,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1620,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1621,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Rebuild the MPCNC or Lowrider v4 upgrade","id":52280,"title":"Rebuild the MPCNC or Lowrider v4 upgrade","slug":"rebuild-the-mpcnc-or-lowrider-v4-upgrade","posts_count":20,"reply_count":10,"highest_post_number":20,"image_url":null,"created_at":"2025-12-07T04:29:38.242Z","last_posted_at":"2026-05-21T01:54:33.340Z","bumped":true,"bumped_at":"2026-05-21T01:54:33.340Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all it’s been a long time. \nSo a couple kids later and I’m finally getting back to some shed time and dusting off the MPCNC. \nI have a pesky core wobble I just can’t get rid of and suspect I will …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":426,"like_count":18,"has_summary":false,"last_poster_username":"Melcour","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Ignore my crazy ideas above. There would be to many unsupported sections of the waste board. I’ll continue with my original idea,","last_post_id":431293,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4935,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Mounting Jackpot3 board","id":54111,"title":"Mounting Jackpot3 board","slug":"mounting-jackpot3-board","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-21T00:53:22.246Z","last_posted_at":"2026-05-21T01:01:53.801Z","bumped":true,"bumped_at":"2026-05-21T01:01:53.801Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a MPCNC where the SKR board is mounted below the base. I am upgrading to the Jackpot3 board and changing the 12V PS to 24V. I’m thinking I can simply swap it out and replace. Or, does it have t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":45,"like_count":0,"has_summary":false,"last_poster_username":"Bartman","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Mounting location is really only limited by cable length, and by antenna interference (antenna should not be restricted by cabling, metal enclosures, or solid objects)","last_post_id":431290,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1683,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10827,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Quantified Stiffness","id":10651,"title":"Quantified Stiffness","slug":"quantified-stiffness","posts_count":14,"reply_count":2,"highest_post_number":14,"image_url":"//us1.dh-cdn.net/uploads/db5587/original/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002.jpeg","created_at":"2019-06-16T20:58:44.000Z","last_posted_at":"2026-05-11T15:33:17.122Z","bumped":true,"bumped_at":"2026-05-11T15:33:17.122Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am contemplating some mods to improve stiffness, in particular for the case of taller-than-recommended Z axis. \nI have made some measurements using a known load and a dial indicator, although it was…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":740,"height":458,"url":"//us1.dh-cdn.net/uploads/db5587/original/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":247,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002_2_400x247.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":123,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002_2_200x123.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":61,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002_2_100x61.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":30,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/2X/b/bdcf3061c327beed8213dfcdc4745f4f8ceb5002_2_50x30.jpeg"}],"tags":[],"tags_descriptions":{},"views":2539,"like_count":6,"has_summary":false,"last_poster_username":"vicious1","category_id":22,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":221,"green":226,"blue":203},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I turned on the autolock a few months back older threads will start locking pretty soon. I went back and hand locked a few hundred, but the other thousands will happen when the time limit happens with…","last_post_id":430499,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2236,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2207,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2828,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14868,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Project “Tall-Boy”: A Lightweight Hybrid Primo for Precision Milling &amp; Printing","id":54021,"title":"Project “Tall-Boy”: A Lightweight Hybrid Primo for Precision Milling & Printing","slug":"project-tall-boy-a-lightweight-hybrid-primo-for-precision-milling-printing","posts_count":26,"reply_count":19,"highest_post_number":26,"image_url":null,"created_at":"2026-05-09T23:29:40.049Z","last_posted_at":"2026-05-11T14:24:39.663Z","bumped":true,"bumped_at":"2026-05-11T14:24:39.663Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone, \nI’ve been digging deep into the MPCNC Primo build and really absorbing all the work Ryan has put into this project. I’m finally starting my first build, but I wanted to share my plan he…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":282,"like_count":53,"has_summary":false,"last_poster_username":"MakerJim","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"+1 So very true.","last_post_id":430497,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14868,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Hilfe bei der Verkabelung Spindel mit FU und die Programmierung der Parameter","id":54020,"title":"Hilfe bei der Verkabelung Spindel mit FU und die Programmierung der Parameter","slug":"hilfe-bei-der-verkabelung-spindel-mit-fu-und-die-programmierung-der-parameter","posts_count":7,"reply_count":4,"highest_post_number":7,"image_url":null,"created_at":"2026-05-09T17:28:07.511Z","last_posted_at":"2026-05-10T05:53:07.638Z","bumped":true,"bumped_at":"2026-05-10T05:53:07.638Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi Leute. Ich hab eine Primo MPCNC - noch im Aufbau. Eine Frage zum FU. Ich hab heute mal geschaut. Ich hab das Modell H100-1.5S2-1B. Beim Stromanschluss sind da 3 Anschlüsse L1 L2 L3. Ich denke der S…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":73,"like_count":2,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Von der Nummer her sind die identisch. Nimm dir Google lense und hoffe, dass du genug aus dem Handbuch herausbekommst. Das ist der Grund, warum wir Anfängern von einer spindel abraten. Und auch die, d…","last_post_id":430405,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":9983,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"How to change MPCNC over to 3d Printer?","id":6198,"title":"How to change MPCNC over to 3d Printer?","slug":"how-to-change-mpcnc-over-to-3d-printer","posts_count":16,"reply_count":0,"highest_post_number":16,"image_url":null,"created_at":"2017-07-30T19:21:34.000Z","last_posted_at":"2026-05-10T03:44:55.983Z","bumped":true,"bumped_at":"2026-05-10T03:44:55.983Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \n   Late last week i put in my order for the mpcnc kit. I bought the electronics kit as well as the printed parts. Ill be using 1\" stainless tube and a import 500w spindle. I went with th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":5226,"like_count":1,"has_summary":false,"last_poster_username":"RebornBeat","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"@forcerouge Did you capture anything from your research? I am actually looking at some new insights on this would be fun to go over it.","last_post_id":430401,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1137,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":748,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14868,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Primo Wiring and Control","id":53916,"title":"Primo Wiring and Control","slug":"primo-wiring-and-control","posts_count":11,"reply_count":8,"highest_post_number":11,"image_url":null,"created_at":"2026-04-24T14:04:18.780Z","last_posted_at":"2026-05-06T00:24:19.219Z","bumped":true,"bumped_at":"2026-05-06T00:24:19.219Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an MPCNC I built in 2019 with an Arduino Mega + RAMPS 1.4 + RepRapDiscount Full Graphic Smart Controller. It had one end stop switch per axis. It ran Marlin 1.0 and I used the MPCNC_Fusion360_V…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":199,"like_count":1,"has_summary":false,"last_poster_username":"dustmaker","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I want to get my Primo running with the current version of Fusion 360, but the learning curve is steep. I’m looking at this process as much as a learning process as it is a way of getting my MPCNC goi…","last_post_id":430091,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1093,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14308,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot 3 oops","id":53937,"title":"Jackpot 3 oops","slug":"jackpot-3-oops","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_768x1024.jpeg","created_at":"2026-04-29T04:10:12.281Z","last_posted_at":"2026-04-29T23:26:13.487Z","bumped":true,"bumped_at":"2026-04-29T23:26:13.487Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I somehow knocked off the capacitor for connector C on my brand new Jackpot 3. I am not using connector C for my MPCNC. Should I mess with trying to re-solder the capacitor? Or will it be fine as long…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2560,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/6/7/677373160f99f43e4743d0d64b23aa3ca77bb765_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":134,"like_count":12,"has_summary":false,"last_poster_username":"mars72","category_id":22,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Not sure what happened. Just noticed it had fallen off… Maybe it wasn’t soldered well to begin with. Thx everyone. I’ll power it up this evening.","last_post_id":429608,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1333,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":268,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Leadscrew Length?","id":53892,"title":"Leadscrew Length?","slug":"leadscrew-length","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-04-20T22:06:32.791Z","last_posted_at":"2026-04-21T06:41:27.945Z","bumped":true,"bumped_at":"2026-04-21T06:41:27.945Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi All, \nIt’s been a while since I started this project. I started in 2016 and after a bunch of stuff got out of the way, I’m back. Issue is I am building the MPCNC Primo, and only have limited space.…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":79,"like_count":2,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"The length is before adding anything as far as I remember. <img src=\"https://forum.v1e.com/images/emoji/google/slightly_smiling_face.png?v=15\" title=\":slightly_smiling_face:\" class=\"emoji\" alt=\":slightly_smiling_face:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":428777,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14814,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Spindelkühlung - welches Kühlmittel","id":53855,"title":"Spindelkühlung - welches Kühlmittel","slug":"spindelkuhlung-welches-kuhlmittel","posts_count":12,"reply_count":9,"highest_post_number":12,"image_url":null,"created_at":"2026-04-15T11:32:45.442Z","last_posted_at":"2026-04-15T16:33:19.330Z","bumped":true,"bumped_at":"2026-04-15T16:33:19.330Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Als Spindel kommt bei mir eine 0,8kw Spindel wassergekühlt mit einem FU zum Einsatz. Gefräst wird zu 99% nur Holz. Nun ist die Frage was nehme ich als Kühlmittel? Ich hab schon viele verschiedene Beit…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":81,"like_count":3,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Jo, die kleinen passen schon. Meine ist ja etwas größer:","last_post_id":428248,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":9983,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"MPCNC Elektrik","id":53825,"title":"MPCNC Elektrik","slug":"mpcnc-elektrik","posts_count":8,"reply_count":5,"highest_post_number":8,"image_url":null,"created_at":"2026-04-11T04:11:19.803Z","last_posted_at":"2026-04-11T16:58:00.151Z","bumped":true,"bumped_at":"2026-04-11T16:58:00.151Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hallo Leute. \nich bin dabei mit die MPCNC zusammenzubauen. Nun komm ich zur Elektronik. Die Steuerung soll über ein CNC Shield mit Arduino Uno erfolgen und mit Estlcam betrieben werden. Wie und wo ich…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":86,"like_count":1,"has_summary":false,"last_poster_username":"Michael2501","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hier wäre noch eine. \nDie ist etwas kleiner: https://www.thingiverse.com/thing:3563844 \nich kann leider selbst nicht drucken. Das einzige was vielleicht angepasst werden muss ist: an der Fronseite nur…","last_post_id":427879,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":9983,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Kobalt trim router failure","id":53789,"title":"Kobalt trim router failure","slug":"kobalt-trim-router-failure","posts_count":32,"reply_count":22,"highest_post_number":32,"image_url":null,"created_at":"2026-04-06T19:07:44.851Z","last_posted_at":"2026-04-10T21:05:55.631Z","bumped":true,"bumped_at":"2026-04-10T21:05:55.631Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Well, my Kobalt trim router apparently threw craps this morning in the middle of a carving project.  It just stopped spinning, as if there were an overload or something.  So, my question: is there, in…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":318,"like_count":41,"has_summary":false,"last_poster_username":"ttraband","category_id":21,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Running the routers for hours at a time at a reduced RPM might also be running them with reduced cooling effectiveness for the fans that are built onto the motor armature. I’d consider adding some sup…","last_post_id":427830,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2373,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":14542,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"SVGs to validate/calibrate belt tension?","id":53788,"title":"SVGs to validate/calibrate belt tension?","slug":"svgs-to-validate-calibrate-belt-tension","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-04-06T12:08:06.377Z","last_posted_at":"2026-04-06T13:47:17.278Z","bumped":true,"bumped_at":"2026-04-06T13:47:05.216Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve been struggling with some issues that I thought were Estlcam completing tool paths ( Estlcam has some occasional mis-moves - is it my source image, my MPCNC, or engraving settings? - #45 by vicio…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":85,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"","last_post_id":427407,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12027,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MPCNC does not start cutting in the correct place","id":53751,"title":"MPCNC does not start cutting in the correct place","slug":"mpcnc-does-not-start-cutting-in-the-correct-place","posts_count":6,"reply_count":4,"highest_post_number":6,"image_url":null,"created_at":"2026-04-01T03:28:51.258Z","last_posted_at":"2026-04-02T11:23:55.544Z","bumped":true,"bumped_at":"2026-04-02T11:23:55.544Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, \nMPCNC newb here. So far I have only generated 1 gcode file. I followed a tutorial from VCarve to create a sign and that worked fine.  So I decided to try one myself and created a some…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":99,"like_count":3,"has_summary":false,"last_poster_username":"Jonathjon","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Add the stuff from the milling basics page to your start gcode.  Then you don’t have to remember to manually do it each time.  The machine will do it for you.","last_post_id":427104,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12439,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"MPCNC original model from 2019 firmware","id":53660,"title":"MPCNC original model from 2019 firmware","slug":"mpcnc-original-model-from-2019-firmware","posts_count":54,"reply_count":49,"highest_post_number":54,"image_url":null,"created_at":"2026-03-21T22:36:16.898Z","last_posted_at":"2026-04-01T01:31:28.805Z","bumped":true,"bumped_at":"2026-04-01T01:31:28.805Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I started building the MPCNC Burly in Dec. 2019, and got it pretty much finished in early 2020, but had some problems with 1 stepper on x, and y axis not working. Also, I had to flash the firmware for…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":381,"like_count":50,"has_summary":true,"last_poster_username":"Bill1","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Yes, and homing was my main problem. Now I just have to learn the machine, but that’s for another day.","last_post_id":426965,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14729,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"The Mini Rambo board has been taking a very long time to start up","id":53741,"title":"The Mini Rambo board has been taking a very long time to start up","slug":"the-mini-rambo-board-has-been-taking-a-very-long-time-to-start-up","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-03-31T09:33:28.189Z","last_posted_at":"2026-03-31T12:03:25.586Z","bumped":true,"bumped_at":"2026-03-31T12:03:25.586Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, I bought the MPCNC Burly a few years ago, and for the past few months, the Mini Rambo board has been taking a very long time to start up. Often it takes more than 10 minutes for the screen to t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":38,"like_count":0,"has_summary":false,"last_poster_username":"vicious1","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"First thing I would check is the power supply. Either use a multimeter on it or unplug all the steppers  from the mini-rambo and see if it starts up faster.","last_post_id":426896,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":4040,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"X-Y Axis not running perpendicular","id":53686,"title":"X-Y Axis not running perpendicular","slug":"x-y-axis-not-running-perpendicular","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-03-25T02:15:50.014Z","last_posted_at":"2026-03-27T14:59:18.061Z","bumped":true,"bumped_at":"2026-03-27T14:59:18.061Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, I have an earlier version of the Burly MPCNC.  I had it up and running, cutting parts but I replaced some parts on the frame.  After putting it all back together the X-Y paths are not at right …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":107,"like_count":3,"has_summary":false,"last_poster_username":"vicious1","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"MPCNC Auto squaring is very similar to the LR, LowRider CNC V4 - V1 Engineering Documentation. \nThe other way is just to physically move the switches instead of the software offsets. \nI highly suggest…","last_post_id":426506,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12736,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MPCNC Primo / Germany / Cologne","id":53656,"title":"MPCNC Primo / Germany / Cologne","slug":"mpcnc-primo-germany-cologne","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_1024x768.jpeg","created_at":"2026-03-21T21:07:06.100Z","last_posted_at":"2026-03-21T22:40:34.178Z","bumped":true,"bumped_at":"2026-03-21T22:40:34.178Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, \nmy name is Markus and I built an MPCNC Primo over the winter. Since today marks my first major success in milling something nice (see below for details), I thought I’d share a few photos of…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1440,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":768,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_1024x768.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":600,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_800x600.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":300,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_400x300.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_200x150.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_100x75.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/2/e/2e4535e1431b0f7a1b82208ce4a571594eeb3a09_2_50x37.jpeg"}],"tags":["gallery-mpcnc"],"tags_descriptions":{},"views":281,"like_count":12,"has_summary":false,"last_poster_username":"MakerJim","category_id":19,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Yeah, except one has to specify with/without gas.  Tap water in Germany is good.","last_post_id":426005,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14549,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser Control boards","id":49934,"title":"Laser Control boards","slug":"laser-control-boards","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/3/a/3a85fce9a122ca786ce44b9973a231786e50458c_2_768x1024.jpeg","created_at":"2025-06-22T14:59:07.883Z","last_posted_at":"2026-03-12T17:59:56.386Z","bumped":true,"bumped_at":"2026-03-12T17:59:56.386Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am running a NJE4060 on a Rambo board.  I get what I think is full power on the start/stop, of each scan line.  This causes burn through.  I purchased a Jackpot controller.  Before I change out the …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2560,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/3/a/3a85fce9a122ca786ce44b9973a231786e50458c.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/3/a/3a85fce9a122ca786ce44b9973a231786e50458c_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/3/a/3a85fce9a122ca786ce44b9973a231786e50458c_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/3/a/3a85fce9a122ca786ce44b9973a231786e50458c_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/3/a/3a85fce9a122ca786ce44b9973a231786e50458c_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/3/a/3a85fce9a122ca786ce44b9973a231786e50458c_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/3/a/3a85fce9a122ca786ce44b9973a231786e50458c_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":174,"like_count":5,"has_summary":false,"last_poster_username":"niget2002","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I recently swapped my laser’s controller to a FluidNC based one also. It too was an effort, but probably because I made a lot of other changes at the same time. \nEnjoy the new setup. I know I’ve enjoy…","last_post_id":425165,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":2201,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":972,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Looking for the cable chain mounts","id":53520,"title":"Looking for the cable chain mounts","slug":"looking-for-the-cable-chain-mounts","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2026-03-09T08:33:13.451Z","last_posted_at":"2026-03-09T12:54:26.033Z","bumped":true,"bumped_at":"2026-03-09T12:54:26.033Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \nI recently saw the build by @Wolf1 and I’m impressed—really great work! It looks very clean. \nI’m currently looking for the right cable chain mounts for my MPCNC Primo. While I’ve found …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":86,"like_count":1,"has_summary":false,"last_poster_username":"Matthias_Schuff","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thank you Wolf!","last_post_id":424771,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14663,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14365,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New Build - Primo Bavaria Germany","id":52407,"title":"New Build - Primo Bavaria Germany","slug":"new-build-primo-bavaria-germany","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_1024x576.jpeg","created_at":"2025-12-14T10:44:03.706Z","last_posted_at":"2026-03-09T08:17:47.498Z","bumped":true,"bumped_at":"2026-03-09T08:17:47.498Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, \nAfter many interruptions, I have now completed the Primo. The first project (my special thanks go to ZenziWerken - Daniel Gross - https://www.zenziwerken.de) was a complete success. M…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":1080,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":576,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_1024x576.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":450,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_800x450.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":225,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_400x225.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":112,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_200x112.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":56,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_100x56.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":28,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/c/cc5c2a73cc54783148a992320fad85fc352d4eeb_2_50x28.jpeg"}],"tags":[],"tags_descriptions":{},"views":314,"like_count":8,"has_summary":false,"last_poster_username":"Matthias_Schuff","category_id":19,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hallo Wolf1, \nsuper Arbeit! Das sieht sehr gut aus. Kannst du mir vielleicht sagen, welche Halter du für die Schleppketten benutzt hast? Ich finde zwar verschiedene Einzelteile zum Drucken, aber bishe…","last_post_id":424757,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14365,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14247,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14663,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jackpot 3 without endstops","id":53505,"title":"Jackpot 3 without endstops","slug":"jackpot-3-without-endstops","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/d/dd5bb2c07c363a049e6b7b61585f7ee3052e057f_2_768x1024.jpeg","created_at":"2026-03-07T20:50:57.129Z","last_posted_at":"2026-03-08T18:52:45.759Z","bumped":true,"bumped_at":"2026-03-08T18:52:45.759Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am trying to set uo jackpot 3 w/o endstops. I get a message abt limited environment &amp; another abt disabling endstops on jackpot 3 . Is there a step by step procedure available to do this ?? \n ","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1920,"height":2560,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/d/d/dd5bb2c07c363a049e6b7b61585f7ee3052e057f.jpeg"},{"max_width":1024,"max_height":1024,"width":768,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/d/dd5bb2c07c363a049e6b7b61585f7ee3052e057f_2_768x1024.jpeg"},{"max_width":800,"max_height":800,"width":600,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/d/dd5bb2c07c363a049e6b7b61585f7ee3052e057f_2_600x800.jpeg"},{"max_width":400,"max_height":400,"width":300,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/d/dd5bb2c07c363a049e6b7b61585f7ee3052e057f_2_300x400.jpeg"},{"max_width":200,"max_height":200,"width":150,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/d/dd5bb2c07c363a049e6b7b61585f7ee3052e057f_2_150x200.jpeg"},{"max_width":100,"max_height":100,"width":75,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/d/dd5bb2c07c363a049e6b7b61585f7ee3052e057f_2_75x100.jpeg"},{"max_width":50,"max_height":50,"width":37,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/d/d/dd5bb2c07c363a049e6b7b61585f7ee3052e057f_2_37x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":96,"like_count":3,"has_summary":false,"last_poster_username":"MakerJim","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Not improperly flashed, just has the wrong config.yaml as Dan mentioned. \n\nCorrect.  You need to load a new config.yaml file that is specific to MPCNC and to Jackpot V3. \nThe present direct link to t…","last_post_id":424700,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1169,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Replace mini rambo control board","id":53386,"title":"Replace mini rambo control board","slug":"replace-mini-rambo-control-board","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":null,"created_at":"2026-02-24T21:07:17.543Z","last_posted_at":"2026-03-07T18:00:41.473Z","bumped":true,"bumped_at":"2026-03-07T18:00:41.473Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have been running mpcnc for years with mini rambo - controlled with my compuuter . I wouid like to replace the rambo , the simplest &amp; quickest way – without a lot of rewiring ? — HELP ! \nThanks , Jo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":112,"like_count":3,"has_summary":false,"last_poster_username":"Britt","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"This explains the Jackpot 3 in detail:","last_post_id":424561,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":1169,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null}]}]}}