{"users":[{"id":-1,"username":"system","name":"system","avatar_template":"//us1.dh-cdn.net/uploads/db5587/original/2X/8/80a6ba28d95c089e3a0b7432139a26faa946cd84.png","admin":true,"moderator":true,"trust_level":4},{"id":353,"username":"jeffeb3","name":"Jeffeb3","avatar_template":"/user_avatar/forum.v1e.com/jeffeb3/{size}/91905_2.png","trust_level":4},{"id":13754,"username":"BigG","name":"George Szunyik","avatar_template":"/letter_avatar_proxy/v4/letter/b/47e85d/{size}.png","trust_level":1},{"id":14218,"username":"Patrick_Mccain","name":"Patrick Mccain","avatar_template":"/user_avatar/forum.v1e.com/patrick_mccain/{size}/96791_2.png","trust_level":0},{"id":14965,"username":"gophergolly","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/g/df788c/{size}.png","trust_level":1},{"id":14971,"username":"slooker","name":"Shawn Looker","avatar_template":"/user_avatar/forum.v1e.com/slooker/{size}/117078_2.png","trust_level":1},{"id":5226,"username":"Tokoloshe","name":"Philipp","avatar_template":"/user_avatar/forum.v1e.com/tokoloshe/{size}/26379_2.png","primary_group_name":"patrons","trust_level":3},{"id":9253,"username":"MakerJim","name":"","avatar_template":"/user_avatar/forum.v1e.com/makerjim/{size}/87766_2.png","trust_level":3},{"id":10851,"username":"Michael_Melancon","name":"Mike M","avatar_template":"/user_avatar/forum.v1e.com/michael_melancon/{size}/63767_2.png","trust_level":3},{"id":14542,"username":"Tylas","name":"Ty","avatar_template":"/user_avatar/forum.v1e.com/tylas/{size}/113153_2.png","trust_level":3},{"id":15065,"username":"Daniel_Anders","name":"Daniel Anders","avatar_template":"/user_avatar/forum.v1e.com/daniel_anders/{size}/118015_2.png","trust_level":1},{"id":14684,"username":"martinrogan","name":"Marty","avatar_template":"/letter_avatar_proxy/v4/letter/m/f17d59/{size}.png","trust_level":2},{"id":11259,"username":"jeyeager","name":"Jason Yeager","avatar_template":"/user_avatar/forum.v1e.com/jeyeager/{size}/71643_2.png","trust_level":3},{"id":11638,"username":"spsully2582","name":"","avatar_template":"/user_avatar/forum.v1e.com/spsully2582/{size}/74139_2.png","trust_level":2},{"id":14777,"username":"dkgrieshammer","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/d/a3d4f5/{size}.png","trust_level":1},{"id":3692,"username":"ttraband","name":"Tom Traband","avatar_template":"/user_avatar/forum.v1e.com/ttraband/{size}/16479_2.png","trust_level":3},{"id":8782,"username":"orob","name":"","avatar_template":"/user_avatar/forum.v1e.com/orob/{size}/62644_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":244,"username":"jono035","name":"Jono","avatar_template":"/user_avatar/forum.v1e.com/jono035/{size}/28_2.png","trust_level":3},{"id":14492,"username":"Robert144","name":"Robert Chilson","avatar_template":"/letter_avatar_proxy/v4/letter/r/0ea827/{size}.png","trust_level":2},{"id":8548,"username":"Dreyfus","name":"","avatar_template":"/user_avatar/forum.v1e.com/dreyfus/{size}/107209_2.png","trust_level":2},{"id":14240,"username":"Jason_Toops","name":"Jason Toops","avatar_template":"/user_avatar/forum.v1e.com/jason_toops/{size}/108473_2.png","trust_level":2},{"id":1706,"username":"caffgeek","name":"Chad","avatar_template":"/user_avatar/forum.v1e.com/caffgeek/{size}/62412_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":2},{"id":14999,"username":"catchgle","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/c/43a26b/{size}.png","trust_level":1},{"id":14843,"username":"Thetim","name":"Tim","avatar_template":"/letter_avatar_proxy/v4/letter/t/b5ac83/{size}.png","trust_level":2},{"id":5875,"username":"mbamberg","name":"Mike Bamberg","avatar_template":"/user_avatar/forum.v1e.com/mbamberg/{size}/62423_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":2},{"id":10238,"username":"vincentw56","name":"Vincent Wright","avatar_template":"/user_avatar/forum.v1e.com/vincentw56/{size}/106564_2.png","trust_level":3},{"id":6606,"username":"CABix","name":"Craig Bixler","avatar_template":"/user_avatar/forum.v1e.com/cabix/{size}/104561_2.png","trust_level":3},{"id":10186,"username":"azab2c","name":"Aza B2C","avatar_template":"/user_avatar/forum.v1e.com/azab2c/{size}/98228_2.png","trust_level":3},{"id":3616,"username":"larryk","name":"Larry Kasper","avatar_template":"/letter_avatar_proxy/v4/letter/l/b5a626/{size}.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":11649,"username":"Swayze","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/ba9def/{size}.png","trust_level":2},{"id":4103,"username":"Jonathjon","name":"Jonathan Jones","avatar_template":"/user_avatar/forum.v1e.com/jonathjon/{size}/70532_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":5647,"username":"SupraGuy","name":"Dan","avatar_template":"/user_avatar/forum.v1e.com/supraguy/{size}/37950_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":2,"username":"vicious1","name":"Ryan","avatar_template":"/user_avatar/forum.v1e.com/vicious1/{size}/104426_2.png","admin":true,"moderator":true,"trust_level":4},{"id":15026,"username":"Madcapwoodwright","name":"","avatar_template":"/user_avatar/forum.v1e.com/madcapwoodwright/{size}/117514_2.png","trust_level":1},{"id":12813,"username":"Milan_Sikman","name":"Milan Šikman","avatar_template":"/user_avatar/forum.v1e.com/milan_sikman/{size}/89839_2.png","trust_level":1},{"id":7286,"username":"Britt","name":"Britt Percival","avatar_template":"/user_avatar/forum.v1e.com/britt/{size}/62440_2.png","trust_level":3},{"id":12461,"username":"franklyrosalind","name":"Zach Zundel","avatar_template":"/user_avatar/forum.v1e.com/franklyrosalind/{size}/88452_2.png","trust_level":2},{"id":10171,"username":"anon32961777","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/a/3e96dc/{size}.png","trust_level":2},{"id":13610,"username":"mikeeyhh","name":"Mike","avatar_template":"/letter_avatar_proxy/v4/letter/m/779978/{size}.png","trust_level":2},{"id":14487,"username":"Colin_S","name":"Colin S","avatar_template":"/user_avatar/forum.v1e.com/colin_s/{size}/111594_2.png","trust_level":2},{"id":14952,"username":"juliusvaart","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/j/8edcca/{size}.png","trust_level":2},{"id":15001,"username":"Jacob1","name":"Jacob ","avatar_template":"/user_avatar/forum.v1e.com/jacob1/{size}/117306_2.png","trust_level":1},{"id":11184,"username":"AndrewB","name":"ANDREW BAKER","avatar_template":"/user_avatar/forum.v1e.com/andrewb/{size}/69450_2.png","trust_level":2},{"id":13968,"username":"Lurch","name":"","avatar_template":"/user_avatar/forum.v1e.com/lurch/{size}/109346_2.png","trust_level":1},{"id":12388,"username":"alumunum","name":"Echo Sierra","avatar_template":"/user_avatar/forum.v1e.com/alumunum/{size}/88208_2.png","trust_level":2},{"id":10974,"username":"Keegan","name":"Keegan M","avatar_template":"/user_avatar/forum.v1e.com/keegan/{size}/64050_2.png","trust_level":2},{"id":8581,"username":"RockinRiley","name":"Riley","avatar_template":"/user_avatar/forum.v1e.com/rockinriley/{size}/52190_2.png","trust_level":3},{"id":15000,"username":"qpeters421","name":"Quinten","avatar_template":"/letter_avatar_proxy/v4/letter/q/82dd89/{size}.png","trust_level":1},{"id":14668,"username":"brownbagginit","name":"Ross","avatar_template":"/letter_avatar_proxy/v4/letter/b/77aa72/{size}.png","trust_level":3},{"id":14770,"username":"Elbeaux","name":"Seth","avatar_template":"/user_avatar/forum.v1e.com/elbeaux/{size}/115617_2.png","trust_level":2},{"id":3142,"username":"kvcummins","name":"K Cummins","avatar_template":"/user_avatar/forum.v1e.com/kvcummins/{size}/16030_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_group_id":41,"trust_level":3},{"id":12677,"username":"Terry_O_Sullivan","name":"Terry O'Sullivan","avatar_template":"/user_avatar/forum.v1e.com/terry_o_sullivan/{size}/92154_2.png","trust_level":3},{"id":14253,"username":"CNCer","name":"","avatar_template":"/user_avatar/forum.v1e.com/cncer/{size}/108771_2.png","trust_level":1},{"id":13688,"username":"ClineDesigns","name":"Mike","avatar_template":"/user_avatar/forum.v1e.com/clinedesigns/{size}/108258_2.png","trust_level":3},{"id":4207,"username":"bitingmidge","name":"Peter H","avatar_template":"/user_avatar/forum.v1e.com/bitingmidge/{size}/18662_2.png","trust_level":2},{"id":2250,"username":"zerg32","name":"Serg","avatar_template":"/user_avatar/forum.v1e.com/zerg32/{size}/91257_2.png","trust_level":2},{"id":13261,"username":"MattV","name":"Matt","avatar_template":"/user_avatar/forum.v1e.com/mattv/{size}/98732_2.png","trust_level":1},{"id":10759,"username":"SteveB","name":"Steve","avatar_template":"/letter_avatar_proxy/v4/letter/s/ea666f/{size}.png","trust_level":1},{"id":9012,"username":"CesarH","name":"cesar","avatar_template":"/user_avatar/forum.v1e.com/cesarh/{size}/60720_2.png","trust_level":3},{"id":14982,"username":"crsaylor","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/c/8c91f0/{size}.png","trust_level":1},{"id":14858,"username":"Tbachtell","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/t/e56c9b/{size}.png","trust_level":1},{"id":13989,"username":"heiserhorn","name":"Mike","avatar_template":"/user_avatar/forum.v1e.com/heiserhorn/{size}/111091_2.png","trust_level":2},{"id":12909,"username":"tretbootfahrer","name":"","avatar_template":"/user_avatar/forum.v1e.com/tretbootfahrer/{size}/114739_2.png","trust_level":2}],"primary_groups":[{"id":41,"name":"patrons"}],"flair_groups":[{"id":41,"name":"patrons","flair_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/2/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"808080","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/lowrider/advice-lowrider/29?page=1","per_page":30,"top_tags":["gallery-lowrider-cnc","parametric-table","aluminum","laser","table"],"topics":[{"fancy_title":"About the Advice category","id":3559,"title":"About the Advice category","slug":"about-the-advice-category","posts_count":8,"reply_count":0,"highest_post_number":11,"image_url":null,"created_at":"2019-11-23T09:16:47.626Z","last_posted_at":"2026-06-15T04:34:18.767Z","bumped":true,"bumped_at":"2026-06-15T04:34:18.767Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"This category is for questions before you build or buy something related to the LowRider CNC.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":1086,"like_count":0,"has_summary":false,"last_poster_username":"gophergolly","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Hello All, \nI purchased the hardware kit for the lowrider v4. I accidentally slide the carriage off one of the linear rails and lost some bearings.  The rails are sold out in the store and I cannot fi…","last_post_id":432844,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":-1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":353,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13754,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14218,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14965,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Questions about homing directions?","id":54489,"title":"Questions about homing directions?","slug":"questions-about-homing-directions","posts_count":10,"reply_count":8,"highest_post_number":10,"image_url":null,"created_at":"2026-07-19T18:49:54.579Z","last_posted_at":"2026-07-20T13:33:56.762Z","bumped":true,"bumped_at":"2026-07-20T13:33:56.762Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all!  I’ve yet to get a good cut in, but I think I sort of know why…? \nWhen I home my X axis, it goes to 0 and hits the endpoint and stops, and I move it maybe 10mm and zero it. \nWhen I home my Y …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":64,"like_count":8,"has_summary":false,"last_poster_username":"Tylas","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Your picture is backwards to how we typically represent it, you are facing the rear X gantry. \nIf you are facing the front of your router (opposite side of the table from the picture) where your left …","last_post_id":435155,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14971,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10851,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14542,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Low Rider 4 Spinel","id":54482,"title":"Low Rider 4 Spinel","slug":"low-rider-4-spinel","posts_count":12,"reply_count":6,"highest_post_number":12,"image_url":null,"created_at":"2026-07-18T22:21:34.223Z","last_posted_at":"2026-07-19T07:43:02.814Z","bumped":true,"bumped_at":"2026-07-19T07:43:02.814Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hi i want to ask somebody how has built th lr4 im new to this maschine but i want to build it \nfirst question if you put in the makita spindel do you have contorl over the pwm? i want to use JP3 Board…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":83,"like_count":1,"has_summary":false,"last_poster_username":"Tokoloshe","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Yeah, either buy an AMB or stick to manual. \nYou also need an addon for the jackpot for controllable spindles.","last_post_id":435069,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":15065,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14684,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"How to connect Motors to Jackpot 3 with your color codes?","id":54474,"title":"How to connect Motors to Jackpot 3 with your color codes?","slug":"how-to-connect-motors-to-jackpot-3-with-your-color-codes","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/6/b6ec10ee412001235745bf0c5153011d45970792.jpeg","created_at":"2026-07-17T12:59:16.586Z","last_posted_at":"2026-07-17T14:26:38.445Z","bumped":true,"bumped_at":"2026-07-17T14:26:38.445Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Dear all, \nI bought the kit via V1 Store and the colors of the wires don’t match the docs for Jackpot 3. I would really appreciate if anybody could tell me in which direction these connectors should b…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":360,"height":640,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/6/b6ec10ee412001235745bf0c5153011d45970792.jpeg"},{"max_width":400,"max_height":400,"width":225,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b6ec10ee412001235745bf0c5153011d45970792_2_225x400.jpeg"},{"max_width":200,"max_height":200,"width":112,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b6ec10ee412001235745bf0c5153011d45970792_2_112x200.jpeg"},{"max_width":100,"max_height":100,"width":56,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b6ec10ee412001235745bf0c5153011d45970792_2_56x100.jpeg"},{"max_width":50,"max_height":50,"width":28,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/6/b6ec10ee412001235745bf0c5153011d45970792_2_28x50.jpeg"}],"tags":[],"tags_descriptions":{},"views":48,"like_count":4,"has_summary":false,"last_poster_username":"ttraband","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":20,"green":19,"blue":18},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Power down the controller completely before unplugging or plugging in motors or you risk damaging the stepper drivers, which are soldered on to the board on the Jackpot v3 and therefore much harder to…","last_post_id":434977,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14777,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14542,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Questions about solid state relays","id":54463,"title":"Questions about solid state relays","slug":"questions-about-solid-state-relays","posts_count":11,"reply_count":7,"highest_post_number":11,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/0/4/04166d62bd6d559dd9c9be2bdd0846475ce9eabb.png","created_at":"2026-07-15T16:07:50.762Z","last_posted_at":"2026-07-16T20:20:14.318Z","bumped":true,"bumped_at":"2026-07-16T20:20:14.318Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all! \nI’m getting ready to wire up some stuff for my LR4 and wanted to get the collective experience of everyone and verify that what I’m doing seems safe and sound. \nI’ve got a makita router (at …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":918,"height":495,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/0/4/04166d62bd6d559dd9c9be2bdd0846475ce9eabb.png"},{"max_width":800,"max_height":800,"width":800,"height":431,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/4/04166d62bd6d559dd9c9be2bdd0846475ce9eabb_2_800x431.png"},{"max_width":400,"max_height":400,"width":400,"height":215,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/4/04166d62bd6d559dd9c9be2bdd0846475ce9eabb_2_400x215.png"},{"max_width":200,"max_height":200,"width":200,"height":107,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/4/04166d62bd6d559dd9c9be2bdd0846475ce9eabb_2_200x107.png"},{"max_width":100,"max_height":100,"width":100,"height":53,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/4/04166d62bd6d559dd9c9be2bdd0846475ce9eabb_2_100x53.png"},{"max_width":50,"max_height":50,"width":50,"height":26,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/0/4/04166d62bd6d559dd9c9be2bdd0846475ce9eabb_2_50x26.png"}],"tags":[],"tags_descriptions":{},"views":146,"like_count":7,"has_summary":false,"last_poster_username":"jono035","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":0,"green":0,"blue":0},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"When looking specifically at the switch there’s no need for an earth because it’s all isolated.  If you’re running the SSR in a non-conductive enclosure, there’s no need to earth anything on the SSR …","last_post_id":434953,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14971,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":244,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Resin printing a lowrider cnc","id":53245,"title":"Resin printing a lowrider cnc","slug":"resin-printing-a-lowrider-cnc","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-02-12T06:20:43.785Z","last_posted_at":"2026-07-16T15:47:00.536Z","bumped":true,"bumped_at":"2026-07-16T15:47:00.536Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"being the owner of a couple of resin 3D printers and loving the presion of resin printing I decided to print several of the parts necessary to the overall build of a lowrider cnc machine. \nPhoto cured…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":224,"like_count":14,"has_summary":false,"last_poster_username":"catchgle","category_id":29,"op_like_count":8,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Did you ever print the parts in resin?","last_post_id":434921,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14492,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8548,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14240,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1706,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":14999,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Dust shoe and tool changes?","id":54196,"title":"Dust shoe and tool changes?","slug":"dust-shoe-and-tool-changes","posts_count":9,"reply_count":4,"highest_post_number":9,"image_url":null,"created_at":"2026-06-01T16:44:54.226Z","last_posted_at":"2026-07-16T00:14:12.829Z","bumped":true,"bumped_at":"2026-07-16T00:14:12.829Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Basic question. I’ve not printed my dust shoe yet. But my trim router has a button close to the collet to lock rotation for tool changes. Does the dust shoe not block access to this? Having to unbolt …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":182,"like_count":8,"has_summary":false,"last_poster_username":"spsully2582","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"You actually inspired me to stop being lazy and design one for my needs.   That and @azab2c calling me out on my YouTube for it lol.  Its still a work in progress though. \n ","last_post_id":434865,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14843,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5875,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6606,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Silly Dustshoe Question?","id":54456,"title":"Silly Dustshoe Question?","slug":"silly-dustshoe-question","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/2/92afd7c5de64bdbf1b0b6e83ddda4918896fa0c8_2_1024x632.jpeg","created_at":"2026-07-14T15:56:16.975Z","last_posted_at":"2026-07-14T16:02:18.479Z","bumped":true,"bumped_at":"2026-07-14T16:02:18.479Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Silly question…  How do you attach the bristles to the dust shoe?  Do you just glue them together? \n ","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1489,"height":919,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/9/2/92afd7c5de64bdbf1b0b6e83ddda4918896fa0c8.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":632,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/2/92afd7c5de64bdbf1b0b6e83ddda4918896fa0c8_2_1024x632.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":493,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/2/92afd7c5de64bdbf1b0b6e83ddda4918896fa0c8_2_800x493.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":246,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/2/92afd7c5de64bdbf1b0b6e83ddda4918896fa0c8_2_400x246.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":123,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/2/92afd7c5de64bdbf1b0b6e83ddda4918896fa0c8_2_200x123.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":61,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/2/92afd7c5de64bdbf1b0b6e83ddda4918896fa0c8_2_100x61.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":30,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/9/2/92afd7c5de64bdbf1b0b6e83ddda4918896fa0c8_2_50x30.jpeg"}],"tags":[],"tags_descriptions":{},"views":59,"like_count":7,"has_summary":false,"last_poster_username":"azab2c","category_id":29,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{"red":48,"green":48,"blue":47},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Slide bristles into the perineter slot on underside of dust skirt part.  Then clip dust skirt onto dust shoe part.  No glue needed. \nVideo clip @ https://zoomtube.com/@azab2c/make/v1e-lr4?s=Dust&amp;v=2_0&amp;…","last_post_id":434719,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":14971,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10186,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Weird first cuts on MDF","id":54425,"title":"Weird first cuts on MDF","slug":"weird-first-cuts-on-mdf","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/2/e2f294677e36c74d51e417cf826b1a7e686f4a8e_2_1024x192.png","created_at":"2026-07-09T12:18:41.165Z","last_posted_at":"2026-07-09T17:25:20.551Z","bumped":true,"bumped_at":"2026-07-09T17:25:20.551Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all! \nJust looking for some basic advice…  What should my movement rates be and why does one side look jagged and the other looks clean? \nI saw in another post someone who said something about rou…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1102,"height":207,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/e/2/e2f294677e36c74d51e417cf826b1a7e686f4a8e.png"},{"max_width":1024,"max_height":1024,"width":1024,"height":192,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/2/e2f294677e36c74d51e417cf826b1a7e686f4a8e_2_1024x192.png"},{"max_width":800,"max_height":800,"width":800,"height":150,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/2/e2f294677e36c74d51e417cf826b1a7e686f4a8e_2_800x150.png"},{"max_width":400,"max_height":400,"width":400,"height":75,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/2/e2f294677e36c74d51e417cf826b1a7e686f4a8e_2_400x75.png"},{"max_width":200,"max_height":200,"width":200,"height":37,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/2/e2f294677e36c74d51e417cf826b1a7e686f4a8e_2_200x37.png"},{"max_width":100,"max_height":100,"width":100,"height":18,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/2/e2f294677e36c74d51e417cf826b1a7e686f4a8e_2_100x18.png"},{"max_width":50,"max_height":50,"width":50,"height":9,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/e/2/e2f294677e36c74d51e417cf826b1a7e686f4a8e_2_50x9.png"}],"tags":[],"tags_descriptions":{},"views":83,"like_count":4,"has_summary":false,"last_poster_username":"larryk","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":100,"green":93,"blue":105},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I am going ro assume that roughness you said is the chip edges on the left side and clean cut on the right side. \nMaybe the camera angle ,but it clearly shows you are cutting deeper on the left side .…","last_post_id":434462,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14971,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3616,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"Jackpot 3 heat sinks","id":54396,"title":"Jackpot 3 heat sinks","slug":"jackpot-3-heat-sinks","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2026-07-03T23:22:14.382Z","last_posted_at":"2026-07-05T14:01:47.593Z","bumped":true,"bumped_at":"2026-07-05T14:01:47.593Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I received 2 heat sinks but have no idea where they go.  I’ve found pictures showing 5 or 6, but not 2?  I need some help on this one.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":94,"like_count":5,"has_summary":false,"last_poster_username":"Jonathjon","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"There’s no room in the box to put them on the bottom. The only place they can go is on the top. That’s how Ryan explained to me to install them.","last_post_id":434220,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11649,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":4103,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":5647,"primary_group_id":41,"flair_group_id":41}]},{"fancy_title":"The low rider v5 release date","id":54289,"title":"The low rider v5 release date","slug":"the-low-rider-v5-release-date","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2026-06-16T23:55:52.141Z","last_posted_at":"2026-07-04T22:56:13.455Z","bumped":true,"bumped_at":"2026-07-04T22:56:13.455Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Ryan when are we expecting version 5?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":323,"like_count":20,"has_summary":false,"last_poster_username":"Madcapwoodwright","category_id":29,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I’m not far behind you!!!","last_post_id":434200,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11649,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":15026,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"YZ Plate Min","id":54353,"title":"YZ Plate Min","slug":"yz-plate-min","posts_count":25,"reply_count":11,"highest_post_number":26,"image_url":null,"created_at":"2026-06-26T18:28:42.525Z","last_posted_at":"2026-07-04T15:17:11.965Z","bumped":true,"bumped_at":"2026-07-04T15:17:11.965Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Greetings from Slovenia. Today I wanted to cnc YZ_Plate_Min. I have a problem with the file that I load into artcam 2018 and edit the settings. The g code is not executed because it has dxf errors, wh…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":208,"like_count":19,"has_summary":false,"last_poster_username":"spsully2582","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"This.   A build thread let’s all of your questions get streamlined.  And it let’s your specifics stay right above the question.  So instead of “what length cables?” The forum sees what you are buildi…","last_post_id":434177,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12813,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Torsion LR4 table generator","id":48849,"title":"Torsion LR4 table generator","slug":"torsion-lr4-table-generator","posts_count":165,"reply_count":116,"highest_post_number":166,"image_url":null,"created_at":"2025-03-31T03:08:59.990Z","last_posted_at":"2026-07-03T20:14:51.750Z","bumped":true,"bumped_at":"2026-07-03T20:14:51.750Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"While cutting cabinets I’m having a few problems related to my hacky table.  Holding tabs sometimes are cut into the spoil board, not parts, which can cause chatter and inaccurate dimensions as the pa…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":["parametric-table"],"tags_descriptions":{},"views":4311,"like_count":230,"has_summary":true,"last_poster_username":"juliusvaart","category_id":29,"op_like_count":10,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"@franklyrosalind \nThanks for the great tool! \nI’ve made an improvement in the below pull-request. It’s got added dogbones with bit-size setting and a fix for the sizing of the exported SVG: \n\n\nI’m goi…","last_post_id":434116,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12461,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10171,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13610,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14487,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14952,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lowrider v4 rails in Australia","id":54351,"title":"Lowrider v4 rails in Australia","slug":"lowrider-v4-rails-in-australia","posts_count":14,"reply_count":8,"highest_post_number":14,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/b/4b321559cdc3849b070cce137c0f85b57ff4c0c8_2_542x1024.png","created_at":"2026-06-26T06:27:46.210Z","last_posted_at":"2026-07-03T08:37:08.842Z","bumped":true,"bumped_at":"2026-07-03T08:37:08.842Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":" \nHey guys I’m about to start my first lowrider build, but I’m having trouble finding the right sized rails. Will these ones be acceptable? They are galvanised and I’m not sure if that will lead to i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":1084,"height":2046,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/4/b/4b321559cdc3849b070cce137c0f85b57ff4c0c8.png"},{"max_width":1024,"max_height":1024,"width":542,"height":1024,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/b/4b321559cdc3849b070cce137c0f85b57ff4c0c8_2_542x1024.png"},{"max_width":800,"max_height":800,"width":423,"height":800,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/b/4b321559cdc3849b070cce137c0f85b57ff4c0c8_2_423x800.png"},{"max_width":400,"max_height":400,"width":211,"height":400,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/b/4b321559cdc3849b070cce137c0f85b57ff4c0c8_2_211x400.png"},{"max_width":200,"max_height":200,"width":105,"height":200,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/b/4b321559cdc3849b070cce137c0f85b57ff4c0c8_2_105x200.png"},{"max_width":100,"max_height":100,"width":52,"height":100,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/b/4b321559cdc3849b070cce137c0f85b57ff4c0c8_2_52x100.png"},{"max_width":50,"max_height":50,"width":26,"height":50,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/4/b/4b321559cdc3849b070cce137c0f85b57ff4c0c8_2_26x50.png"}],"tags":[],"tags_descriptions":{},"views":135,"like_count":6,"has_summary":false,"last_poster_username":"Jacob1","category_id":29,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{"red":23,"green":76,"blue":80},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Cheers mate <img src=\"https://forum.v1e.com/images/emoji/google/+1.png?v=15\" title=\":+1:\" class=\"emoji\" alt=\":+1:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":434079,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":15001,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":14684,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11184,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13968,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12388,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Shroud / deflector for Jackpot fan","id":54388,"title":"Shroud / deflector for Jackpot fan","slug":"shroud-deflector-for-jackpot-fan","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-07-02T15:56:37.642Z","last_posted_at":"2026-07-02T17:18:16.053Z","bumped":true,"bumped_at":"2026-07-02T17:18:16.053Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This is just a small thing – has anyone designed a deflector / shroud for the fan on the Jackpot case so that dust and chips don’t get in? I am using a 4010 axial fan, as I had clearance issues betwee…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":53,"like_count":0,"has_summary":false,"last_poster_username":"Tylas","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I have used coarse sponge filters for this purpose in the past, works well and relatively easy to clean when they get clogged.  Pretty easy solution if you aren’t looking for hepa-level filtration. \nL…","last_post_id":434012,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10974,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14542,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Brass lead screw nut","id":54373,"title":"Brass lead screw nut","slug":"brass-lead-screw-nut","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-06-29T18:07:02.588Z","last_posted_at":"2026-06-29T22:33:50.564Z","bumped":true,"bumped_at":"2026-06-29T22:33:50.564Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The instructions say thread the brass nut on face down ( but no picture  ) .  Is the flat face that goes down?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":66,"like_count":2,"has_summary":false,"last_poster_username":"Swayze","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I started a thread in the build section. ‘I finally did it ‘ post.  Please take a look at the pics and tell me what I screwed up.","last_post_id":433846,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":11649,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Cutting the conduit","id":54364,"title":"Cutting the conduit","slug":"cutting-the-conduit","posts_count":6,"reply_count":0,"highest_post_number":6,"image_url":null,"created_at":"2026-06-28T23:49:49.632Z","last_posted_at":"2026-06-29T21:52:02.806Z","bumped":true,"bumped_at":"2026-06-29T21:52:02.806Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"What’s the best to cut the conduit?   Sawzall, tubing cutter, Metal chop saw, or???","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":105,"like_count":6,"has_summary":false,"last_poster_username":"Swayze","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thanks guys","last_post_id":433837,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":11649,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5875,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8581,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Problems with Y Endstop","id":54357,"title":"Problems with Y Endstop","slug":"problems-with-y-endstop","posts_count":11,"reply_count":7,"highest_post_number":11,"image_url":null,"created_at":"2026-06-28T02:22:52.156Z","last_posted_at":"2026-06-29T10:20:27.306Z","bumped":true,"bumped_at":"2026-06-29T10:20:27.306Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone!  I’ve finally got my LR4 built.  I had an issue initially with the X endstop switch not triggering a stop, but I’ve got that situated, but now my Y axis won’t stop when I home it.  I can…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":94,"like_count":6,"has_summary":false,"last_poster_username":"slooker","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I got it homed on all three axis!  Thank you everyone for your help. <img src=\"https://forum.v1e.com/images/emoji/google/slight_smile.png?v=15\" title=\":slight_smile:\" class=\"emoji\" alt=\":slight_smile:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":433778,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14971,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What Tool Mount and Dust Shoe work on a Generic 65mm Router","id":54349,"title":"What Tool Mount and Dust Shoe work on a Generic 65mm Router","slug":"what-tool-mount-and-dust-shoe-work-on-a-generic-65mm-router","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-26T01:45:05.328Z","last_posted_at":"2026-06-26T01:45:05.597Z","bumped":true,"bumped_at":"2026-06-26T01:45:05.597Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a generic 65mm OD router and am wondering if any tool mount would work or if I am going to have to design my own. I attempted to do my research, and it seemed like any 65mm OD router would be f…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":52,"like_count":0,"has_summary":false,"last_poster_username":"qpeters421","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I have a generic 65mm OD router and am wondering if any tool mount would work or if I am going to have to design my own. I attempted to do my research, and it seemed like any 65mm OD router would be fine, but now I am wo&hellip;","last_post_id":433615,"topic_post_number":null,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":15000,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Should X Rails be shorter than Y rail?","id":54339,"title":"Should X Rails be shorter than Y rail?","slug":"should-x-rails-be-shorter-than-y-rail","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/4/b423e32a9e20f1ede56370d345a1e776e2b6ac40.png","created_at":"2026-06-24T18:47:35.046Z","last_posted_at":"2026-06-24T20:47:43.909Z","bumped":true,"bumped_at":"2026-06-24T20:47:43.909Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For whatever reason, the way I put this into my calculator was dumb and I got (2) X Rails of 56.625” and (1) Y Rail of 36.125”. \nLooking at this now, it seems kind of stupid, but I’ve already cut my c…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":620,"height":546,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/b/4/b423e32a9e20f1ede56370d345a1e776e2b6ac40.png"},{"max_width":400,"max_height":400,"width":400,"height":352,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b423e32a9e20f1ede56370d345a1e776e2b6ac40_2_400x352.png"},{"max_width":200,"max_height":200,"width":200,"height":176,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b423e32a9e20f1ede56370d345a1e776e2b6ac40_2_200x176.png"},{"max_width":100,"max_height":100,"width":100,"height":88,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b423e32a9e20f1ede56370d345a1e776e2b6ac40_2_100x88.png"},{"max_width":50,"max_height":50,"width":50,"height":44,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/b/4/b423e32a9e20f1ede56370d345a1e776e2b6ac40_2_50x44.png"}],"tags":[],"tags_descriptions":{},"views":91,"like_count":10,"has_summary":false,"last_poster_username":"slooker","category_id":29,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{"red":58,"green":58,"blue":58},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"For my first time, I went ahead and flipped it back around…  I had enough conduit left thankfully, and I hadn’t fully assembled yet.  I just need to cut and feed the belts again now. <img src=\"https://forum.v1e.com/images/emoji/google/confused.png?v=15\" title=\":confused:\" class=\"emoji\" alt=\":confused:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":433552,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14971,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14542,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14668,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Metal strut plates","id":53875,"title":"Metal strut plates","slug":"metal-strut-plates","posts_count":14,"reply_count":10,"highest_post_number":14,"image_url":null,"created_at":"2026-04-19T04:56:11.106Z","last_posted_at":"2026-06-23T06:12:10.119Z","bumped":true,"bumped_at":"2026-06-23T06:12:10.119Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m returning to the LR4 build and thinking about strut plates. I know the standard procedure is to assemble the machine using printed struts, and then cut the final plates out of hardboard or MDF. Bu…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":296,"like_count":11,"has_summary":false,"last_poster_username":"Terry_O_Sullivan","category_id":29,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"fletcher steel do a furniture tube, which if remember it is 31.8  , after 2 yrs only just getting slight surface rust now , the stainless does look cool though \none thing i noticed with over head hose…","last_post_id":433418,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":10974,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14770,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3142,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":12677,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mac software for MPCNC lowrider LR3 cnc machine","id":51877,"title":"Mac software for MPCNC lowrider LR3 cnc machine","slug":"mac-software-for-mpcnc-lowrider-lr3-cnc-machine","posts_count":43,"reply_count":34,"highest_post_number":43,"image_url":null,"created_at":"2025-11-09T16:25:58.218Z","last_posted_at":"2026-06-22T22:35:53.517Z","bumped":true,"bumped_at":"2026-06-22T22:35:53.517Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just bought a MPCNC lowrider LR3 cnc machine that another guy built. I never thought to ask about Mac software when I bought it and he gave me a link that is for Windows. I tried searching on Google…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":493,"like_count":19,"has_summary":false,"last_poster_username":"CNCer","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thanks, I’ll  give hime a try!","last_post_id":433399,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13688,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3692,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4207,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Latest thinking on cutting aluminium plate","id":54308,"title":"Latest thinking on cutting aluminium plate","slug":"latest-thinking-on-cutting-aluminium-plate","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2026-06-19T08:37:43.391Z","last_posted_at":"2026-06-22T01:41:42.209Z","bumped":true,"bumped_at":"2026-06-22T01:41:42.209Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Its been a long while since I have cut some aluminium plate but when I did it was sucessful. At the time I used the recommended trichoidal cutting motion and it worked well but I remember the trichoid…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":191,"like_count":14,"has_summary":false,"last_poster_username":"AndrewB","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Likely I plunged it in too quick. Was a 4mm single flute but in the end I was happy with the full DOC and a slow 2mm/s cut speed. Seemed to have nice chips coming out and perhaps could increase the c…","last_post_id":433369,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":11184,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2250,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Repeat machining - homing &amp; orientation?","id":54278,"title":"Repeat machining - homing & orientation?","slug":"repeat-machining-homing-orientation","posts_count":13,"reply_count":5,"highest_post_number":13,"image_url":null,"created_at":"2026-06-15T14:58:25.607Z","last_posted_at":"2026-06-22T00:32:14.783Z","bumped":true,"bumped_at":"2026-06-22T00:32:14.783Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve had my lowrider for about a year, but this is my first post! Thanks to the community forums for helping me get up and running. Awesome community and design. \nI am making plywood cabinetry and wan…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":218,"like_count":11,"has_summary":false,"last_poster_username":"CesarH","category_id":29,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I place my 6mm on one side and back before turning on my vacuum table, so my sheets are placed correctly, then i remove the pins so my bits aren’t wasted when profiling (they are just helpers, i would…","last_post_id":433367,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":13261,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10759,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":9012,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Key design points for Low Rider 4 table","id":54315,"title":"Key design points for Low Rider 4 table","slug":"key-design-points-for-low-rider-4-table","posts_count":8,"reply_count":5,"highest_post_number":8,"image_url":null,"created_at":"2026-06-20T14:10:23.444Z","last_posted_at":"2026-06-21T21:04:47.699Z","bumped":true,"bumped_at":"2026-06-21T21:04:47.699Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This is my first post. I want to build a table for the Low Rider 4 that can handle a 4’x’8 plywood.  I would like to do through cuts as well as dados for shelving. \nI’m really impressed with the conce…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":159,"like_count":4,"has_summary":false,"last_poster_username":"Terry_O_Sullivan","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"did i repeat myself , sorry bad habit of doing that","last_post_id":433357,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14982,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":12677,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser Enclosure Help","id":54259,"title":"Laser Enclosure Help","slug":"laser-enclosure-help","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2026-06-11T14:52:30.742Z","last_posted_at":"2026-06-21T06:06:38.290Z","bumped":true,"bumped_at":"2026-06-21T06:06:38.290Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve come a long way.  The wood cutting is progressing.  Have got a real good feel for Fusion and using it for modeling and CAM.  Bought the LaserTree 20w Pro and goggles but now think an enclosure ma…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":139,"like_count":0,"has_summary":false,"last_poster_username":"bitingmidge","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"The simplest enclosure is a box.   I have some orange acrylic that is supposed to be “laser safe” but I don’t trust it - real certified stuff is the cost of a small house and there must be a reason fo…","last_post_id":433332,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":14858,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11259,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13989,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4207,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Down side to down size?","id":54290,"title":"Down side to down size?","slug":"down-side-to-down-size","posts_count":12,"reply_count":4,"highest_post_number":12,"image_url":null,"created_at":"2026-06-17T00:23:28.202Z","last_posted_at":"2026-06-20T23:21:57.536Z","bumped":true,"bumped_at":"2026-06-20T23:21:57.536Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My lr4 is full mdf size, but it’s just too big my shop.   I’m thinking if I go to 24x48 that’s still a big panel but would take up so much less floor. \nHad anyone from the big boy to smaller a regrett…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":196,"like_count":12,"has_summary":false,"last_poster_username":"Terry_O_Sullivan","category_id":29,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I built mine originally at 3m long as needed it for couple of big blabs \nwhat ive done now is cut it down to 2.4m, kept piece i cut off, left belt at length needed for 3m \nand have 2 Y rails ,so if ne…","last_post_id":433313,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11638,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4207,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10851,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8782,"primary_group_id":41,"flair_group_id":41},{"extras":"latest","description":"Most Recent Poster","user_id":12677,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Latest on endstops?","id":54317,"title":"Latest on endstops?","slug":"latest-on-endstops","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-06-20T19:56:11.171Z","last_posted_at":"2026-06-20T20:40:51.174Z","bumped":true,"bumped_at":"2026-06-20T20:40:51.174Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My LR4 has served me well so far, flawless &amp; lots of great cuts! \nBut today is the day that it overran an end stop switch on the y-axis. This ended up in a bent end stop arm and the switch needs to be…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":71,"like_count":5,"has_summary":false,"last_poster_username":"azab2c","category_id":29,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Usually, we can straighten the spring metal swing arms if they get bent. \nAnd, usually, we can insert popped metal swing arms back into the plastic housing, by hand or using some needle nose pliers (…","last_post_id":433295,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":12909,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10186,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"YZ Plates and M5 Bolts length problem? (solved)","id":54298,"title":"YZ Plates and M5 Bolts length problem? (solved)","slug":"yz-plates-and-m5-bolts-length-problem-solved","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/a/ca38d40ae249531a1efcc45dd3c58d0214f71c35_2_1024x483.jpeg","created_at":"2026-06-18T16:39:00.394Z","last_posted_at":"2026-06-18T20:58:30.877Z","bumped":true,"bumped_at":"2026-06-18T20:58:30.877Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all! I’m at the part where I’m building the YZ plates and it’s saying to put in the M5 screws and nuts just as placeholders (left side image below) \n  \nBut my m5 screws don’t reach the nuts (right…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":[{"max_width":null,"max_height":null,"width":2401,"height":1133,"url":"https://us2.dh-cdn.net/uploads/db5587/original/3X/c/a/ca38d40ae249531a1efcc45dd3c58d0214f71c35.jpeg"},{"max_width":1024,"max_height":1024,"width":1024,"height":483,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/a/ca38d40ae249531a1efcc45dd3c58d0214f71c35_2_1024x483.jpeg"},{"max_width":800,"max_height":800,"width":800,"height":377,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/a/ca38d40ae249531a1efcc45dd3c58d0214f71c35_2_800x377.jpeg"},{"max_width":400,"max_height":400,"width":400,"height":188,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/a/ca38d40ae249531a1efcc45dd3c58d0214f71c35_2_400x188.jpeg"},{"max_width":200,"max_height":200,"width":200,"height":94,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/a/ca38d40ae249531a1efcc45dd3c58d0214f71c35_2_200x94.jpeg"},{"max_width":100,"max_height":100,"width":100,"height":47,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/a/ca38d40ae249531a1efcc45dd3c58d0214f71c35_2_100x47.jpeg"},{"max_width":50,"max_height":50,"width":50,"height":23,"url":"https://us2.dh-cdn.net/uploads/db5587/optimized/3X/c/a/ca38d40ae249531a1efcc45dd3c58d0214f71c35_2_50x23.jpeg"}],"tags":[],"tags_descriptions":{},"views":62,"like_count":5,"has_summary":false,"last_poster_username":"slooker","category_id":29,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"Thanks… I finally figured that out… a few minutes after I posted this.  <img src=\"https://forum.v1e.com/images/emoji/google/sweat_smile.png?v=15\" title=\":sweat_smile:\" class=\"emoji\" alt=\":sweat_smile:\" loading=\"lazy\" width=\"20\" height=\"20\">","last_post_id":433188,"topic_post_number":null,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":14971,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5226,"primary_group_id":41,"flair_group_id":null}]},{"fancy_title":"Low rider accessories","id":54300,"title":"Low rider accessories","slug":"low-rider-accessories","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-18T17:37:04.120Z","last_posted_at":"2026-06-18T18:53:21.364Z","bumped":true,"bumped_at":"2026-06-18T18:53:21.364Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is the cooling fan needed for the jackpot?  Does it come with the touchplate or do I have to add that?  I thoughtbive read people breaking things, end stops/beltholders - should I order an extra as I …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"thumbnails":null,"tags":[],"tags_descriptions":{},"views":78,"like_count":2,"has_summary":false,"last_poster_username":"vincentw56","category_id":29,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"sidecar_installed":false,"dominant_color":{},"include_dominant_colour":false,"force_latest_post_nav":false,"show_latest_post_excerpt":false,"last_post_excerpt":"I would suggest the fan depending on how hot it is where you are. But it is cheap and a safe thing to have. You will need to buy or make a touch plate. There is one in the store. I never broke anythin…","last_post_id":433170,"topic_post_number":null,"posters":[{"extras":null,"description":"Original Poster","user_id":11649,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10238,"primary_group_id":null,"flair_group_id":null}]}]}}